Introduction
This manual provides detailed instructions for assembling your AMT 1977 International Harvester Scout II 1:25 Scale Model Kit. Please read all instructions carefully before beginning assembly. This kit is designed for hobbyists with a Skill Level 2, indicating moderate experience is recommended.
Image: A fully assembled AMT 1977 International Harvester Scout II model, painted green with white stripes and a white roof, showcasing the vehicle from a front-side angle.
Safety Information
- Small Parts: This kit contains small parts which may pose a choking hazard. Keep out of reach of small children.
- Sharp Tools: Assembly requires the use of sharp hobby knives and other tools. Exercise caution to prevent injury.
- Adhesives and Paints: Use model adhesives and paints in a well-ventilated area. Follow manufacturer's safety guidelines for all chemical products.
- Age Recommendation: Recommended for ages 10 months and up, but adult supervision is advised for younger builders due to small parts and tools.
Package Contents
Your AMT 1977 International Harvester Scout II model kit includes:
- Over 53 unassembled plastic pieces, molded in yellow.
- Off-road style vinyl tires.
- Expanded decal sheet.
- Mag chrome rims (bonus feature).
- Instruction sheet.
Image: The retail box for the AMT 1977 International Harvester Scout II model kit, featuring an illustration of the vehicle and listing key features and dimensions.
Setup
Required Tools and Materials (Not Included):
- Plastic model cement/glue.
- Hobby knife or sprue cutters.
- Small files or sandpaper for smoothing parts.
- Model paints (acrylic recommended) and brushes for desired color scheme.
- Tweezers for small parts and decals.
- Clean, well-lit workspace.
Workspace Preparation:
Ensure your workspace is clean, well-ventilated, and free from distractions. Protect your work surface with a cutting mat or newspaper. Organize your tools and parts for easy access.
Assembly Instructions
Follow the numbered steps in the included instruction sheet for detailed part-by-part assembly. The kit is molded in yellow plastic, allowing for custom paint finishes.
General Assembly Tips:
- Part Preparation: Carefully remove parts from the sprue using cutters or a hobby knife. Trim any excess plastic (flash) with a hobby knife or file.
- Test Fit: Before applying glue, test fit parts together to ensure proper alignment and fit.
- Gluing: Apply a small amount of plastic model cement to one surface. Hold parts together firmly until the glue sets. Avoid using too much glue, as it can damage the plastic.
- Painting: Paint parts according to your desired scheme. It is often easier to paint smaller components before attaching them. Allow paint to dry completely before handling or assembling.
- Decals: Apply decals to clean, dry surfaces. Use decal setting solutions for better adhesion and to conform to irregular surfaces.
Image: An infographic highlighting key features of the model kit: molded in yellow, produced from vintage tooling, paint & glue required, 1:25 scale, skill level 2, and 53+ parts.
Key Features and Details:
- The kit includes Goodyear tires for realistic detail.
- A colorful decal sheet is provided for authentic markings and stripes.
- Mag chrome rims are included as a bonus feature to enhance the model's appearance.
Image: A collage showing detailed views of the model, including the interior dashboard and seats, the textured Goodyear tires, and the undercarriage with exhaust and suspension components.
Assembly Demonstration Video:
Video: A demonstration of the International Scout II model kit in its built-up form, showcasing the completed model from various angles. This video is provided by the seller, Auto World Store, to illustrate the final product.
Maintenance
- Cleaning: Dust your assembled model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials, which can damage paint and decals.
- Storage: Store your model in a cool, dry place away from direct sunlight to prevent fading and warping. Consider a display case to protect it from dust and accidental damage.
- Handling: Handle the model carefully, especially delicate parts like mirrors or antennas, to prevent breakage.
Troubleshooting
- Parts Not Fitting: If parts do not fit together smoothly, check for excess plastic (flash) and carefully trim it. Ensure you are using the correct parts as indicated in the instructions.
- Decals Tearing: Decals can be fragile. Ensure the surface is clean and wet the decal thoroughly before attempting to slide it off the backing paper. Use tweezers for precise placement.
- Paint Issues: If paint is not adhering or appears uneven, ensure the surface is clean and dry before painting. Apply thin, even coats rather than one thick coat. Allow adequate drying time between coats.
- Missing Parts: In the event of missing parts, please contact AMT customer support with your kit's model number and a description of the missing component.
Specifications
| Feature | Detail |
|---|---|
| Brand | AMT |
| Model Name | AMT1248 |
| Scale | 1:25 |
| Vehicle Model | 1977 International Harvester Scout II |
| Material | Plastic |
| Number of Pieces | 53 |
| Molded Color | Yellow |
| Assembled Dimensions (approx.) | 6.5" Width x 2.5" Depth x 3" Height |
| Item Weight | 11.9 ounces (0.34 Kilograms) |
| Manufacturer Recommended Age | 10 months and up |
| UPC | 849398046760 |
Image: An image illustrating the approximate dimensions of the assembled 1:25 scale model: 6.5 inches width, 2.5 inches depth, and 3 inches height.
Warranty and Support
For questions regarding missing parts, assembly issues, or general product support, please contact the manufacturer, Round2, LLC, or the retailer where the kit was purchased. Specific warranty details may vary and are typically provided with the product packaging or on the manufacturer's official website.
Manufacturer: Round2, LLC
