USX MOUNT B08VF2RV8T
Contents
USX MOUNT Full Motion TV Wall Mount Instruction Manual
Model: B08VF2RV8T
1. Important Safety Information
Please read this manual thoroughly before installation and use. Failure to do so may result in personal injury, property damage, or voiding of warranty.
- Weight Capacity: This TV wall mount is designed for TVs weighing up to 120 lbs (54.4 kg). Do not exceed this weight limit.
- TV Size Compatibility: Suitable for most TVs between 42 and 84 inches.
- Wall Type: This mount is designed for installation on 8", 12", or 16" wood studs and concrete walls. DO NOT install into drywall alone. If installing on a concrete wall, ensure you have the appropriate anchors.
- Professional Installation: If you are unsure about the installation process, consult a qualified professional.
- Children and Pets: Ensure the TV and mount are securely installed to prevent accidental tipping, especially in households with children or pets.
2. Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact customer service.

Figure 2.1: Overview of the USX MOUNT Full Motion TV Wall Mount and included accessories.
The package typically includes:
- Wall Plate Assembly
- TV Brackets (x2)
- Mounting Hardware Kit (various screws, washers, spacers, anchors)
- Drilling Template
- Bubble Level
- Cable Ties (x3)
- Instruction Manual
3. Product Features
The USX MOUNT Full Motion TV Wall Mount offers a range of features for an optimized viewing experience and secure installation.
- Full Motion Capability: Allows for extensive adjustment of your TV's position.
- Tilt Adjustment: Adjust the screen from +5° to -15° to reduce glare and optimize viewing angles.
- Swivel Functionality: Swivel the TV up to ±45° left or right for flexible viewing from different areas of a room. (Note: Maximum swivel angle may vary based on TV size.)
- Extension and Retraction: Extends up to 15.18 inches (38.5 cm) from the wall and retracts to a slim 2.76 inches (7 cm) to save space.
- Post-Installation Level Adjustment: Fine-tune the TV level by ±4° after installation for a perfectly straight display.
- Universal VESA Compatibility: Supports VESA patterns from 200x100mm up to 600x400mm.
- Durable Construction: Made from high-quality steel for robust support.

Figure 3.1: Demonstrating the ±45° swivel capability for optimal viewing.

Figure 3.2: Adjusting the tilt angle to reduce glare.

Figure 3.3: Post-installation level adjustment for perfect alignment.

Figure 3.4: Extension and retraction capabilities for space saving and access.
4. Setup and Installation
This section provides a general guide for installing your TV wall mount. Always refer to the included drilling template and hardware pack for specific instructions and measurements.
4.1. Pre-Installation Checks
- Ensure your TV's weight and VESA pattern are within the mount's specifications.
- Locate suitable wall studs (for wood stud installation) or determine a concrete wall location.
- Gather necessary tools: stud finder, drill, level, pencil, measuring tape, screwdriver, socket wrench.
4.2. Attaching Brackets to TV
Carefully place your TV face down on a soft, clean surface. Attach the two TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are securely fastened and evenly aligned.

Figure 4.1: VESA pattern on the back of a TV, indicating horizontal and vertical measurements.
4.3. Installing Wall Plate
Using the drilling template, mark the drill holes on your wall. Drill pilot holes according to the instructions for your specific wall type (wood stud or concrete). Securely fasten the wall plate to the wall using the provided lag bolts and washers. Ensure the wall plate is level using the included bubble level.

Figure 4.2: Compatible wall types for installation.
4.4. Hanging the TV
With the wall plate securely mounted, carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is properly seated and secured. Some models may require tightening security screws at the bottom of the TV brackets to prevent accidental dislodging.

Figure 4.3: Simplified 3-step installation overview.
5. Operating and Adjustments
Once installed, your USX MOUNT allows for various adjustments to achieve your desired viewing angle.
- Tilting: Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then re-tighten the knobs to secure the position.
- Swiveling: Gently push or pull the TV to swivel it left or right. The articulating arms will allow smooth movement.
- Extending/Retracting: Pull the TV away from the wall to extend the arms, or push it back towards the wall to retract.
- Leveling: If your TV is not perfectly level after installation, use the post-installation level adjustment screws (typically located on the TV brackets) to fine-tune the horizontal alignment by up to ±4°.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your TV wall mount.
- Cleaning: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
- Periodic Checks: Periodically check all screws and bolts to ensure they remain tight and secure. Over time, vibrations or adjustments can cause fasteners to loosen.
- Lubrication: The articulating joints are designed for smooth movement. If you notice any stiffness, a small amount of silicone-based lubricant can be applied to the moving parts, avoiding electrical components.
7. Troubleshooting
If you encounter issues during or after installation, refer to the following common solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| TV not level after installation. | Wall plate not perfectly level, or minor adjustments needed. | Use the post-installation level adjustment feature (±4°) on the TV brackets to fine-tune. |
| Mount feels unstable or loose. | Lag bolts not fully tightened, incorrect wall type, or exceeding weight capacity. | Ensure all lag bolts are securely tightened. Verify installation on appropriate wall type (wood stud or concrete, not drywall alone). Confirm TV weight is within 120 lbs limit. |
| Difficulty adjusting tilt or swivel. | Tilt knobs too tight, or joints require lubrication. | Loosen tilt knobs before adjusting. Apply a small amount of silicone-based lubricant to articulating joints if movement is stiff. |
| Mounting bracket appears upside down. | Incorrect orientation during assembly. | Refer to the instruction manual for the correct orientation. Look for directional arrows on the bracket. |
| Missing concrete anchors. | Not included by default for all kits. | Contact USX MOUNT customer service to request concrete anchors if needed for your installation. |
For further assistance, please contact USX MOUNT customer service with your complete TV model information.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | USX MOUNT |
| Model | B08VF2RV8T |
| TV Size Compatibility | 42 - 84 inches |
| Maximum Load Capacity | 120 lbs (54.4 kg) |
| VESA Compatibility | 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x400mm |
| Tilt Angle | +5° / -15° |
| Swivel Angle | ±45° |
| Level Adjustment | ±4° |
| Extension from Wall | 2.76 inches (retracted) to 15.18 inches (extended) |
| Material | Metal |
| Color | Black |
| Item Weight | 11.62 pounds (5.27 kg) |
| UPC | 796391108592 |
9. Warranty and Customer Support
USX MOUNT provides comprehensive support for its products.
- Warranty: This product comes with a 10-year after-sales service warranty.
- Contact Support: For any questions, missing parts, or technical assistance, please contact USX MOUNT customer service.
- Online Resources: An official user manual in PDF format is available for download here.
- Brand Store: Explore other USX MOUNT products and information by visiting the official USX MOUNT Store.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.