1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Pentair Amerilite EC602128 Underwater Pool Light. The Amerilite light is designed to provide reliable illumination for swimming pools and spas. It features a robust design and incorporates safety mechanisms for dependable performance.
Figure 1: Pentair Amerilite EC602128 Underwater Pool Light. This image displays the complete underwater pool light unit, highlighting its stainless steel face ring and clear lens.
2. Safety Information
WARNING: Risk of Electric Shock. Always turn off electrical power at the circuit breaker before attempting any installation, service, or maintenance. Failure to do so can result in serious injury or death.
- Submerge Before Lighting: The light must be fully submerged in water before operation. Operating the light out of water can cause overheating and damage due to the heat sensing cutoff feature.
- Qualified Installation: Installation should be performed by a qualified electrician or pool professional in accordance with all local and national electrical codes.
- Proper Grounding: Ensure the light fixture and all associated electrical components are properly grounded to prevent electrical hazards.
- Cord Integrity: Regularly inspect the power cord for any signs of damage, fraying, or wear. Do not use the light if the cord is damaged.
- Low Water Cutoff: This light is equipped with a low water cutoff feature for safety. If the water level drops below a safe operating point, the light will automatically shut off to prevent damage.
- Gasket Replacement: Always install a new lens gasket when replacing the bulb or servicing the light to ensure a watertight seal.
3. Product Features
- Stainless Steel Face Ring: Provides durability and a clean aesthetic.
- Superior Light Diffusion: Designed for even and bright illumination of your pool or spa.
- Low Water Cutoff: An integrated safety feature that prevents the light from operating when not adequately submerged.
- Heat Sensing Cutoff: Protects the light from overheating if operated out of water.
- 50-Foot Cord: Offers ample length for flexible installation and connection to the power source.
- Optional Lens Covers: Compatible with snap-on lens covers (sold separately) in various colors (blue, red, green, amber) to create different lighting moods.
4. Setup & Installation
The Pentair Amerilite EC602128 is designed for straightforward installation into existing pool light niches. Professional installation is recommended.
4.1 Pre-Installation Checklist
- Ensure power to the pool light circuit is OFF at the main breaker.
- Verify the existing niche is compatible with the 10-inch Amerilite fixture.
- Gather necessary tools: screwdriver, wire strippers, electrical tape, conduit lubricant (e.g., Vaseline).
4.2 Installation Steps
- Remove Old Light (if applicable): Carefully remove the existing pool light fixture from its niche. Disconnect the wiring, ensuring the power is off.
- Prepare Wiring: If replacing an old light, use the old wire as a pull line for the new light's cord. Cut the old wire at the light fixture end. Securely splice the cut end of the old wire to the free end of the new light's 50-foot cord (the end opposite the light fixture). Wrap the splice with electrical tape, ensuring the diameter is not excessively large.
- Pull New Cord: From the junction box or switch box, gently pull the old wire out. This will draw the new light's cord through the conduit. Applying a small amount of conduit lubricant (like Vaseline) to the new cable can facilitate easier pulling.
- Connect Wiring: At the junction box, connect the new light's wiring according to local electrical codes and the light's instructions. Typically, this involves connecting the black wire to the hot lead, the white wire to the neutral lead, and the green wire to the ground terminal.
- Secure Light in Niche: Carefully coil the excess cord behind the light fixture in the niche. Position the light fixture into the niche and secure it using the provided pilot screw on the face ring. Ensure the light is properly seated and sealed.
- Submerge and Test: Once the light is securely installed and the pool is filled to the appropriate level, turn on the power at the circuit breaker. Verify the light operates correctly.
Figure 2: Dimensions of the Pentair Amerilite EC602128. This diagram illustrates the light's dimensions, showing a diameter of 10.12 inches and a depth of 7.72 inches, crucial for niche compatibility.
Video 1: Pentair Amerilite Swimming Pool Spa Light. This video provides a visual overview of the Pentair Amerilite pool light, demonstrating its features and appearance, which can be helpful for understanding the product prior to installation.
5. Operation
Operating the Pentair Amerilite EC602128 is simple.
- Turning On/Off: The light is typically controlled by a dedicated switch located at your pool's equipment panel or a remote control system, if installed.
- Optional Color Lenses: If you wish to change the color of the light, optional snap-on lens covers are available. Ensure the power is off and the light is accessible before attempting to attach or remove these covers.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your pool light.
- Cleaning: Periodically clean the light's face ring and lens to remove any algae, mineral deposits, or debris that may obstruct light output. Use a soft brush or cloth and mild pool-safe cleaning solutions.
- Bulb Replacement: The light uses a 500-watt incandescent bulb (E26 base). When replacing the bulb, always turn off the power, remove the light from its niche, and carefully open the fixture. Replace the bulb with an identical type and wattage. Always install a new lens gasket to maintain the watertight seal.
- Cord Inspection: Annually inspect the entire length of the power cord for any signs of damage, cracks, or deterioration. Address any issues immediately.
7. Troubleshooting
If you encounter issues with your Pentair Amerilite EC602128, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power, tripped breaker, faulty bulb, low water level, faulty wiring. | Check circuit breaker. Ensure water level is adequate. Replace bulb. Inspect wiring (professional recommended). |
| Light is dim | Dirty lens, aging bulb, voltage drop. | Clean lens. Replace bulb. Consult an electrician to check voltage. |
| Water inside light fixture | Damaged gasket, improper seal during installation. | Turn off power immediately. Remove light, drain water, inspect and replace gasket, re-seal properly. |
| Light turns off unexpectedly | Low water cutoff activated, heat sensing cutoff activated. | Check pool water level. Ensure light is fully submerged. Allow light to cool if operated out of water. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Pentair |
| Model Number | EC-602128 |
| Voltage | 120 Volts |
| Wattage | 500 watts |
| Light Source Type | Incandescent |
| Light Color | White |
| Product Dimensions (L x W x H) | 10.12" x 10.12" x 7.72" |
| Item Weight | 11.93 Pounds |
| Cord Length | 50 Foot |
| Material | Stainless Steel |
| Installation Type | Underwater |
| Water Resistance Level | Water Resistant |
| Brightness | 6000 Lumens |
| Efficiency | 12 lumens per watt |
| Certification | UL Listed |
9. Warranty & Support
The Pentair Amerilite EC602128 Underwater Pool Light comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or further assistance, please contact Pentair customer service directly. Keep your proof of purchase for warranty validation.
Pentair Customer Service: Refer to the contact information provided with your product packaging or visit the official Pentair website for current support details.
