Important Safety Instructions
WARNING: To avoid electric shock, always unplug the unit before cleaning or performing any maintenance. Do not immerse the unit in water. Do not operate with a damaged cord or plug. For indoor use only.
- Read all instructions before using this product.
- Do not look directly into the LED lights.
- Ensure the product is placed on a stable, flat surface.
- Keep away from water and moisture.
- Do not attempt to modify or repair the unit yourself. Contact qualified service personnel.
Package Contents
Verify that all components are present before assembly.
- 1x LED Grow Light Fixture (Integrated with stand and base)
- 1x Power Adapter
- 1x User Manual (This document)
Image: The Feit Electric Tabletop LED Grow Light, showing the integrated light bar, stand, and base.
Setup and Installation
The Feit Electric GLP17/B/TABLE/14WLED grow light is designed for easy tabletop placement and requires minimal assembly.
- Unpack: Carefully remove all components from the packaging.
- Placement: Place the grow light on a stable, flat surface where your plants will receive adequate light. Ensure there is enough space around the unit for proper ventilation.
- Connect Power: Insert the power adapter into the power port on the back or side of the grow light base. Plug the other end of the power adapter into a standard electrical outlet (120V AC).
- Positioning: Position the light approximately 6-12 inches above the plant canopy, adjusting as plants grow.
Image: The Feit Electric Grow Light illuminating a potted plant, demonstrating typical usage.
Operation
The grow light features touch controls for power and spectrum mode selection.
Power On/Off
- To Turn On: Gently touch the power button located on the base of the unit. The light will illuminate in the last used spectrum mode.
- To Turn Off: Touch the power button again.
Spectrum Modes
This grow light offers three distinct spectrum modes optimized for different plant growth stages:
- Seeding Mode: Ideal for germination and young seedlings. Provides a spectrum rich in blue light to encourage strong root development and compact growth.
- Vegetation Mode: Suitable for the vegetative growth phase, promoting lush foliage and overall plant health. This mode typically balances blue and red light.
- Flowering Mode: Designed to support the flowering and fruiting stages, with a spectrum emphasizing red light to stimulate bloom production.
To Change Mode: With the light on, repeatedly touch the mode selection button to cycle through the Seeding, Vegetation, and Flowering modes. The light will visually change to indicate the selected spectrum.
Image: Detailed charts illustrating the spectral output and horticultural application for Seeding, Vegetation, and Flowering modes.
Maintenance
Regular maintenance ensures optimal performance and longevity of your grow light.
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe down the light fixture and base. Do not use abrasive cleaners or solvents.
- Dust Removal: Periodically remove any dust accumulation from the LED panel to maintain light output efficiency.
- Storage: If storing the unit for an extended period, unplug it, clean it, and store it in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose connection; faulty outlet. | Check if the power adapter is securely plugged into both the light and the wall outlet. Test the outlet with another device. |
| Light flickers or dims. | Unstable power supply; loose connection. | Ensure all connections are secure. Try plugging into a different outlet. |
| Cannot change spectrum mode. | Incorrect button press; temporary software glitch. | Ensure you are pressing the correct mode selection button. Unplug the unit for 30 seconds and plug it back in to reset. |
If the problem persists after trying these solutions, please contact Feit Electric customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | GLP17/B/TABLE/14WLED |
| Brand | Feit Electric |
| Wattage | 14 Watts |
| Light Source Type | LED |
| Product Dimensions | 9.84"D x 7"W x 17"H |
| Item Weight | 1.32 Pounds |
| Input Voltage | 120 Volts (AC) |
| Control Method | Touch |
| Indoor/Outdoor Usage | Indoor |
| Rated Life Hours | 25,000 Hours |
| Spectrum Modes | Seeding, Vegetation, Flowering |
| Material | Plastic |
| UPC | 017801719574 |
Image: Diagram showing the dimensions of the Feit Electric Tabletop LED Grow Light: 17 inches height, 9.84 inches depth, 7 inches width.
Warranty
This product comes with a manufacturer's warranty. Please refer to the warranty information provided with your purchase or visit the official Feit Electric website for details regarding warranty coverage and terms.
Note: Protection plans may be available for extended coverage. These are separate from the manufacturer's warranty.
Customer Support
For technical assistance, replacement parts, or any questions regarding your Feit Electric GLP17/B/TABLE/14WLED grow light, please contact Feit Electric customer support:
- Website: www.feitelectric.com
- Phone: Refer to the official website for current contact numbers.
