1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your TEXAS GS1680Li Battery-Powered Pruning Shears. Please read this manual thoroughly before using the product and keep it for future reference. This tool is designed for pruning branches up to 25mm in diameter.
2. General Safety Instructions
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.
- Work Area Safety: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
- Personal Safety: Always wear eye protection and appropriate protective clothing. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.
3. Product Components
Familiarize yourself with the parts of your TEXAS GS1680Li pruning shears and included accessories.
Figure 3.1: The TEXAS GS1680Li battery-powered pruning shears, showcasing its ergonomic design and sharp bypass blades.
Figure 3.2: All components included with the TEXAS GS1680Li pruning shears: the shears unit, battery, battery charger, sharpening stone, screwdriver, wrench, and a small bottle of lubricating oil.
Figure 3.3: Rear view of the TEXAS GS1680Li pruning shears, showing the battery compartment and product labeling.
- Pruning Shears Unit: The main body with bypass blades.
- Battery Pack: Rechargeable power source.
- Battery Charger: For recharging the battery.
- Sharpening Stone: For blade maintenance.
- Screwdriver: For minor adjustments.
- Wrench: For blade assembly/disassembly.
- Lubricating Oil: For blade lubrication.
4. Setup
- Unpacking: Carefully remove all components from the packaging. Inspect for any damage.
- Battery Installation: Ensure the battery is fully charged before first use. Align the battery pack with the slot at the base of the shears handle and slide it in until it clicks securely into place.
- Initial Check: Before operation, ensure the blades are clean and free from obstructions.
5. Charging the Battery
- Connect the charger to a standard power outlet.
- Insert the battery pack into the charger.
- Observe the indicator light on the charger. It will typically show red during charging and turn green when fully charged.
- Once fully charged, disconnect the battery from the charger and unplug the charger from the outlet.
- Note: Do not overcharge the battery. Refer to the battery and charger manual for specific charging times and indicators.
6. Operating Instructions
- Power On: With the battery securely installed, press and hold the power button (if present) or trigger until the shears activate. Some models may require a double-press of the trigger to activate.
- Cutting: Position the branch to be cut between the open blades. Ensure the branch diameter does not exceed the maximum cutting capacity of 25mm.
- Trigger Operation: Gently squeeze the trigger to close the blades and make the cut. Release the trigger to open the blades.
- Safety Lock: Always engage the safety lock or power off the tool when not actively cutting or when moving between work areas.
- Power Off: To turn off the shears, follow the specific power-off procedure for your model (e.g., press and hold power button, or a sequence of trigger presses). Remove the battery when storing the tool.
7. Maintenance
Regular maintenance ensures optimal performance and extends the life of your pruning shears.
- Cleaning: After each use, clean the blades with a dry cloth to remove sap and debris. For stubborn residue, use a specialized blade cleaner.
- Lubrication: Apply a few drops of the provided lubricating oil to the pivot point and blade surfaces after cleaning to prevent rust and ensure smooth operation.
- Sharpening: Periodically sharpen the blades using the provided sharpening stone. Follow the original blade angle. Caution: Blades are sharp; handle with care.
- Storage: Store the shears in a dry, secure place, out of reach of children. Remove the battery pack before long-term storage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shears do not turn on. | Battery not charged or not properly installed. | Ensure battery is fully charged and securely inserted. Check power button/trigger activation sequence. |
| Blades do not cut cleanly. | Blades are dull or dirty. | Clean and sharpen the blades. Lubricate the pivot point. |
| Shears stop during operation. | Overload protection activated or battery low. | Reduce cutting load. Recharge the battery. Allow the tool to cool down if it overheated. |
9. Technical Specifications
- Brand: TEXAS
- Model: GS1680Li
- Model Number: 90063145
- Blade Type: Bypass
- Maximum Cutting Width: 25 mm
- Item Weight: 1.1 kg
- Batteries Included: Yes
- ASIN: B08VDFSN9N
- First Available Date: January 29, 2021
10. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
