Animal Tag Reader User Manual

Introduction

This manual provides essential information for the proper use and maintenance of your Cuifati Animal Tag Reader. This universal RFID scanner is designed for efficient and reliable identification of animal microchips and ear tags, supporting EMID, FDX-B, and ISO1784/85 standards. Please read this manual thoroughly before operating the device.

Figure 1: Front and back view of the Animal Tag Reader, showing its compact, rectangular design with a display screen and a blue button on the front.

Setup

Package Contents

Before proceeding, ensure all items are present in the package:

• 1 x Animal Tag Reader
• 1 x Data Cable (USB)
• 1 x User Manual (this document)

Initial Charging

The device comes with a built-in 900mAH lithium battery. Before first use, it is recommended to fully charge the device using the provided USB data cable. Connect the cable to the reader and a standard USB power source (e.g., computer USB port, USB wall adapter).

Operating Instructions

Powering On/Off

Press and hold the blue button on the front of the device to power it on. The screen will illuminate. To power off, press and hold the same button until the device shuts down.

Reading Animal Tags

The Animal Tag Reader utilizes advanced radio frequency technology for non-contact reading. To read a tag:

1. Ensure the device is powered on.
2. Position the reader near the animal's microchip or ear tag. The optimal reading distance for glass tube labels is 2~12mm (effective up to >5cm), and for 30mm animal ear tags, it is up to >15cm.
3. The device will automatically detect and display the tag information on its high-brightness 0.91-inch screen. A buzzer will sound upon successful reading.
4. The read response time is less than 100 milliseconds, ensuring quick identification.

Figure 2: The high-brightness OLED screen ensures clear visibility of tag information, even in direct sunlight.

Figure 3: Non-contact reading capability with effective distances for various tag types, highlighting the advanced radio frequency technology.

Compatibility

The Animal Tag Reader offers strong compatibility, supporting the following label formats:

• EMID
• FDX-B (ISO11784/85)

Figure 4: The reader's strong compatibility with EMID/FDX-B/ISO1784/85 standards allows it to read various animal tags, such as the ear tag shown on the sheep.

Data Storage and Transfer

The device has an internal storage function capable of storing up to 128 tag messages. To transfer stored data to a computer:

1. Connect the Animal Tag Reader to your computer using the provided USB data cable.
2. The device will appear as a removable storage device.
3. Access the stored tag information, which can then be copied or managed as needed.

Figure 5: The device's storage function allows up to 128 tag readings to be saved and then uploaded to a computer via the USB cable.

Maintenance

Cleaning

To clean the device, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the device openings. Do not use abrasive cleaners or solvents.

Storage

Store the Animal Tag Reader in a cool, dry place away from direct sunlight and extreme temperatures. When storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.

Troubleshooting

Device Not Powering On

• Ensure the battery is charged. Connect the device to a power source using the USB cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Verify that the power button is being pressed and held correctly.

Unable to Read Tags

• Ensure the tag is within the optimal reading distance (2~12mm for glass tube, up to 15cm for ear tags).
• Verify that the tag is compatible with the reader (EMID, FDX-B, ISO1784/85).
• Check for any physical obstructions between the reader and the tag.

Data Transfer Issues

• Ensure the USB cable is securely connected to both the reader and the computer.
• Try a different USB port on your computer.
• Verify that your computer's operating system recognizes new USB devices.

Specifications

Warranty and Support

For warranty information and technical support, please contact the manufacturer, Cuifati, directly. Refer to the product packaging or the manufacturer's official website for contact details.