LifePro LP-LGRPLS

Download PDF
Contents

LifePro Legra Plus Hand Massager

Instruction Manual

Introduction

The LifePro Legra Plus Hand Massager is designed to provide therapeutic relief for hands, wrists, and fingers through a combination of compression, heat, and vibration. This manual provides essential information for safe and effective use of your device.

LifePro Legra Plus Hand Massager with Heat and Compression, black and blue unit with control panel and included stress balls.

The LifePro Legra Plus Hand Massager, shown in black with blue accents, features a prominent control panel and comes with two sensory stress balls.

Safety Information

  • Never use the Hand Massager under a blanket.
  • Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

What's Included

Contents of the LifePro Legra Plus Hand Massager package, including the massager, two sensory squishy toys, travel bag, USB-C charging adapter, and user manual.

The complete package contents are displayed: the hand massager unit, two sensory squishy toys (yellow and blue), a black travel bag, a USB-C charging adapter, and the user manual.

  • LifePro Legra Plus Hand Massager
  • USB-C Charging Adapter
  • Travel Bag
  • 2 Sensory Squishy Toys
  • User Manual

Product Overview

The Legra Plus Hand Massager features an intuitive LED control panel for easy operation. It offers multiple settings to customize your massage experience.

Close-up of the LifePro Legra Plus Hand Massager's LED control panel with a user interacting with it.

The LED control panel of the massager, displaying options for 6 intensity levels, 6 massage modes, 2 vibration settings, and heat up to 104°F, with a user demonstrating its ease of use.

  • Intensity Levels: 6 adjustable levels (L1-L6) for compression.
  • Massage Modes: 6 different programs (P1-P6), including auto modes.
  • Vibration: 2 levels of vibration (V1-V2).
  • Heat Function: Heats up to 104°F (takes 5-7 minutes to reach full temperature).
  • Automatic Timer: Default running time of 15 minutes.

Setup and First Use

  1. Ensure the Hand Massager is fully charged and powered OFF.
  2. Place the Hand Massager on a flat, level surface.
  3. Wash and dry your hands thoroughly.
  4. Place a hand, palm down, into the cloth-lined massage chamber. Slide your hand all the way through until your fingertips are visible at the end, or until you feel the circular palm pad on the inside of your palm. The device is user-friendly for both right and left hands.
  5. Press the Power button to turn on the Hand Massager.

Helpful Video: How to Use the Hand Massager

Official LifePro video demonstrating how to use the Legra Plus Hand Massager, including power on, selecting modes, adjusting intensity, and utilizing heat and vibration functions for hand and wrist relief.

Operating Instructions

Upon powering on, the device defaults to Intensity Level 3 and Program Mode P1. You can customize your experience using the control panel buttons:

  • Power Button: Press to turn the device ON/OFF.
  • Intensity Button: Adjusts the compression intensity from L1 (lowest) to L6 (highest).
  • Mode Button: Cycles through 6 different massage programs (P1-P6). P1 and P2 are auto modes, which means intensity, vibration, and heat settings are pre-programmed. For P3-P6, you can manually adjust intensity, vibration, and heat.
  • Vibration Button: Toggles between 2 vibration levels (V1, V2) or turns vibration off.
  • Heat Button: Activates or deactivates the heat function.
  • Turn On/Suspend Button: Pauses or resumes the current massage cycle.

Refer to page 8 of your physical user manual for detailed descriptions of each program mode.

Hand inside the LifePro Legra Plus Hand Massager showing heat and compression zones.

An illustration of a hand placed inside the massager, highlighting the areas where compression and heat therapy are applied to ease pain in hands, wrists, and fingers.

Charging

The Legra Plus Hand Massager is battery-powered for cordless convenience. When the battery runs low:

  1. Power OFF the device. The air chambers will empty.
  2. Locate the USB-C charging port on the side of the massager.
  3. Connect the provided USB-C cable to the massager and the USB-C charging adapter.
  4. Plug the adapter into a wall outlet.
  5. A full charge takes approximately 3 to 4 hours, providing 2 to 4 hours of running time.

Maintenance

  • Clean the exterior of the massager with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
  • Store the massager in its travel bag in a cool, dry place when not in use.

Troubleshooting

If you encounter any issues with your LifePro Legra Plus Hand Massager, please refer to the detailed troubleshooting section in your complete user manual or contact LifePro customer support for assistance.

Specifications

Feature Specification
Product Dimensions 13.4 x 7.8 x 6.1 inches
Item Weight 2.4 Pounds
Item Model Number LP-LGRPLS
Brand LifePro
Power Source Battery Powered
Material Plastic
Manufacturer LifePro

Warranty and Support

Every LifePro massager undergoes rigorous quality control testing and comes with a built-in lifetime warranty. To activate your limited lifetime warranty, please register your Legra Plus Hand Massager within the first 14 days of purchase.

LifePro also offers lifetime support from their 'guiding angels' customer service team.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.