1. Introduction
This manual provides comprehensive instructions for the installation, configuration, and operation of your Lorex Fusion 4K Security Camera System. This system includes a 16-channel Network Video Recorder (NVR) with a 3TB hard drive and eight 4K wired IP Power over Ethernet (POE) cameras. Designed for both indoor and outdoor use, the cameras feature smart deterrence capabilities and advanced motion detection.
Image 1.1: Overview of the Lorex Fusion 4K Security Camera System components.
2. Package Contents
Verify that all items listed below are present in your package. If any components are missing or damaged, contact Lorex customer support.
- 1 x 16-Channel 4K Network Video Recorder (NVR) with 3TB Hard Drive
- 8 x 4K Wired IP POE Smart Deterrence Cameras
- 8 x Ethernet Cables (for camera connection)
- 1 x HDMI Cable
- 1 x Ethernet Cable (for NVR network connection)
- 1 x Power Adapter for NVR
- 1 x USB Mouse
- Mounting Hardware (screws, anchors)
- Quick Start Guide
Image 2.1: The Network Video Recorder (NVR) includes a pre-installed 3TB hard drive for local storage.
3. System Setup
3.1 NVR Connections
Before mounting cameras, connect the NVR to a power source, a monitor, and your network.
- Connect to Power: Plug the NVR power adapter into the NVR's power input and then into a wall outlet.
- Connect to Monitor: Use the provided HDMI cable to connect the NVR's HDMI output to a monitor or TV. Alternatively, a VGA connection is available.
- Connect to Network: Connect one end of the Ethernet cable to the NVR's LAN port and the other end to your router or network switch. This enables remote viewing and system updates.
- Connect USB Mouse: Plug the USB mouse into one of the NVR's USB ports for system navigation.
Image 3.1: Rear panel of the NVR, illustrating connection ports for power, network, video output, and cameras.
3.2 Camera Installation and Connection
The cameras are Power over Ethernet (POE), meaning they receive both power and video data through a single Ethernet cable. This simplifies installation.
- Plan Camera Placement: Identify optimal locations for each camera, considering coverage area, power access (if not using POE switch), and cable routing. The cameras are designed for indoor/outdoor use and are weather-resistant.
- Mount Cameras: Securely mount each camera using the provided screws and anchors. Adjust the camera angle for desired viewing.
- Connect Cameras: Connect one end of an Ethernet cable to the camera's Ethernet port and the other end to one of the NVR's POE ports. The NVR will automatically power the cameras and establish a connection.
Image 3.2: Lorex cameras are built to withstand various weather conditions, suitable for outdoor installation.
3.3 Initial System Configuration
Follow the on-screen prompts on the connected monitor to complete the initial setup, including setting a password, time zone, and network settings. Download the Lorex Home app for remote access.
Image 3.3: The NVR can be integrated with smart home displays for convenient monitoring.
4. Operation
4.1 Accessing the System
You can access your security system locally via the NVR's connected monitor or remotely using the Lorex Home mobile application.
- Local Access: Use the USB mouse to navigate the NVR's interface on the connected monitor.
- Remote Access: Download the Lorex Home app from your device's app store. Follow the in-app instructions to add your NVR. Note that while the app can be installed on multiple devices, simultaneous active viewing may be limited to one device at a time, requiring re-authorization for each switch.
Image 4.1: Remote monitoring of your security system via the Lorex Home mobile application.
4.2 Video Monitoring and Recording
The system continuously records video to the 3TB hard drive. You can view live feeds, review recorded footage, and configure recording schedules through the NVR interface or the mobile app.
4.3 Smart Motion Detection Features
The cameras are equipped with advanced Smart Motion Detection Plus, which can differentiate between various types of movement.
- Person and Vehicle Detection: The system can identify and alert you specifically when a person or vehicle enters the camera's field of view, reducing false alarms from other movements.
- Face Detection: Certain camera models may offer face detection capabilities for enhanced monitoring.
4.4 Active Deterrence Features
Each camera includes active deterrence features to warn off intruders.
- Motion-Activated LED Warning Light: When motion is detected, a bright LED light can be activated to deter unwanted visitors.
- Remote-Triggered Siren: A built-in siren can be activated remotely via the app or automatically upon detection to further deter potential threats.
Image 4.2: A Lorex camera activating its LED warning light to deter activity.
4.5 Night Vision Modes
The cameras provide clear surveillance even in low-light conditions.
- Color Night Vision: In ambient light conditions, the cameras can capture full-color video.
- IR Night Vision: In complete darkness, infrared (IR) LEDs provide crisp black and white video up to 150 feet.
Image 4.3: Visual comparison between traditional IR night vision and enhanced color night vision.
4.6 Safeguard Technology
This feature allows you to define specific areas for monitoring asset removal or addition.
- Missing Areas: Set up to three areas to detect if an item is removed.
- Left Behind Area: Define one area to detect if an item is added.
Image 4.4: Safeguard Technology in action, identifying missing objects (boats) and left-behind items (package).
4.7 Two-Way Talk
The cameras feature a built-in microphone and speaker, enabling two-way audio communication through the Lorex Home app.
Image 4.5: Camera indicating two-way audio capability with microphone and speaker symbols.
4.8 Playback and Review
The NVR's interface and the Lorex Home app provide intuitive tools for reviewing recorded footage. You can search by time, date, or motion event. The app offers a convenient feature to play back short clips of detected motion events.
5. Maintenance
5.1 General Care
- Keep the NVR in a well-ventilated area to prevent overheating.
- Regularly clean camera lenses with a soft, damp cloth to ensure clear image quality.
- Ensure all cable connections are secure and free from damage.
5.2 Hard Drive Management
The 3TB hard drive provides ample storage for continuous recording. The NVR is configured to overwrite the oldest footage automatically once the hard drive is full. You can back up important footage to an external USB drive if needed.
6. Troubleshooting
This section addresses common issues you might encounter with your Lorex security system.
- No App Notifications: If you are not receiving notifications, try unregistering and re-registering all cameras within the Lorex Home app. Ensure app permissions for notifications are enabled on your mobile device.
- False Motion Detections: Smart motion detection can sometimes trigger on non-human/vehicle movements (e.g., trees, pets). Adjust the sensitivity and threshold settings for each camera in the NVR's configuration menu. Lowering sensitivity (e.g., to 15, from a recommended 30-70) and adjusting the threshold (e.g., to 70, from a recommended 10-50) may help.
- Area Selection Ignored: If defined motion detection areas appear to be ignored, this may indicate a software issue. Ensure your NVR firmware is up to date. If the problem persists, contact Lorex customer support.
- NVR Fan Noise: The NVR may produce noticeable fan noise. Consider placing the NVR in a location where noise is not a concern, ensuring adequate airflow around the unit to prevent overheating.
- Remote Access Limitations: While the Lorex Home app can be installed on multiple smart devices, simultaneous active viewing might be limited to one device. You may need to re-authorize devices when switching. Multiple viewers can typically be used on a computer with Windows or similar operating systems.
- HDMI Output Issue: If the NVR's HDMI output is not functioning, try using a VGA cable if available. Verify monitor input settings.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Lorex |
| Model Number | N86263T-88AB-E |
| Connectivity Technology | Wired (POE) |
| Video Capture Resolution | 2160p (4K UHD) |
| Special Features | Image Sensor, Motion Sensor, Vehicle Detection, Face Detection |
| Number of Channels | 16 |
| Memory Storage Capacity | 3000 GB (3TB) |
| Color | White (Cameras), Black (NVR) |
| Power Source | Corded Electric |
| Item Dimensions (L x W x H) | 7.2 x 14.7 x 2.1 inches (NVR) |
| Compatible Devices | Cameras |
| Low Light Technology | Night Vision (Color & IR) |
| Night Vision Range | Up to 150 feet (IR) |
| Frame Rate | 30 FPS |
| Recording Mode | Motion Detection, Continuous |
| Hardware Interface | 802.11 ac/b/g/n (for network, not camera connection), BNC, RJ45 |
| Lens Type | Wide Angle |
| Video Input | RJ45 (POE) |
| Item Weight | 1 pounds (NVR) |
| UPC | 695529034768 |
8. Warranty Information
For detailed information regarding the warranty coverage for your Lorex Fusion 4K Security Camera System, please refer to the official Lorex website or the warranty card included with your product. Warranty terms and conditions may vary.
9. Customer Support
If you require further assistance with installation, operation, or troubleshooting, please visit the official Lorex support website. You can find FAQs, software downloads, and contact information for technical support.
Lorex Support Website: www.lorex.com/support
