Dr Ho's CP-XP
Dr Ho's Circulation Promoter XP Deluxe Package Instruction Manual
Comprehensive guide for setup, operation, and maintenance.
Product Overview
The Dr Ho's Circulation Promoter XP Deluxe Package is an advanced device designed to provide targeted relief for foot and leg pain, enhance circulation, and alleviate muscle discomfort. It integrates TENS (Transcutaneous Electrical Nerve Stimulation), EMS (Electrical Muscle Stimulation), and proprietary AMP (Auto-Modulating Pulse) technologies to deliver a variety of therapeutic stimulations. This deluxe package includes additional body pads for comprehensive full-body pain management.
Image: The Dr Ho's Circulation Promoter XP Deluxe Package, showing the main unit, foot pads, and various body pads included.
Safety Information
Before using the Dr Ho's Circulation Promoter XP, please read and understand all safety warnings. Consult your doctor if you have any pre-existing medical conditions, especially if you have pacemakers, defibrillators, extreme cardiac irregularities, metal implants, electronic auxiliary devices, abnormally high blood pressure, a tendency toward internal bleeding, epilepsy, or if you are pregnant. This device is intended for temporary pain relief and circulation enhancement, not for diagnosing, treating, curing, or preventing any disease or health condition.
Setup Guide
- Unpack and Inspect: Open the package and ensure all components are present and undamaged.
- Battery Installation: Insert the required batteries into the main device unit. Ensure correct polarity.
- Connecting Foot Electrodes: For foot and leg therapy, attach the foot electrodes to the main base unit. Ensure a secure connection.
- Connecting Body Pads: For targeted relief on other body parts, connect the regular or large body pads to the device using the provided wires.
- Prepare Pads/Feet: For optimal conduction, spray both the foot pads and your bare feet with water before each use. If using body pads, ensure the skin area is clean and dry before applying the pads.
Image: The main Dr Ho's device unit connected to the foot pads, ready for use.
Image: A person seated, demonstrating the placement of feet on the Dr Ho's Circulation Promoter foot pads.
Operating Instructions
- Power On: Turn on the device using the ON/OFF switch.
- Select Intensity: Slowly turn the Intensity Dial clockwise to increase the stimulation intensity to your desired comfort level. Start with a low setting and gradually increase.
- Choose Therapy Mode: Press the 'Mode' button to cycle through the three unique therapy modes (TENS, EMS, AMP) to find the sensation that best suits your needs. The device offers over 300 varying stimulations.
- Set Treatment Time: Press the 'Time' button to select a treatment duration of 10, 20, or 40 minutes. The device will automatically shut off when the time is complete. To continue treatment, turn the Intensity Dial to 'OFF' first, then turn it back 'ON' for a new session.
- Placement for Body Pads: When using body pads, refer to the included pad placement chart for optimal positioning on areas such as the neck, back, shoulders, arms, and knees. Ensure pads are placed on the same muscle group for effective stimulation.
Image: A close-up view of the Dr Ho's device control panel, showing the ON/OFF switch, Intensity Dial, Mode button, and Time button.
Image: An illustrative diagram explaining the TENS, EMS, NMES, and proprietary AMP technologies used in the device.
Maintenance and Care
- Cleaning the Device: Wipe the main unit with a soft, damp cloth. Do not submerge the device in water or use abrasive cleaners.
- Electrode Pad Care: After each use, gently rub the gel pads with a few drops of water to restore stickiness. Place them back onto their protective film and store in a sealed bag to prevent drying. Replace pads when they lose their stickiness.
- Storage: Store the device and all accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Replacement: Replace batteries when the device's performance diminishes or it fails to power on.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sensation or weak stimulation | Pads are dry or not making full contact; low batteries; incorrect intensity setting. | Spray pads and skin with water; ensure pads are firmly applied; replace batteries; increase intensity gradually. |
| Device not turning on | Dead or incorrectly inserted batteries. | Check battery orientation; replace with fresh batteries. |
| Pads losing stickiness quickly | Pads are dirty or not stored properly. | Clean pads as per maintenance instructions; store in sealed bag on protective film. |
Product Specifications
- Product Dimensions: 13.5 x 6.38 x 5 inches
- Item Weight: 1.25 Pounds / 1.3 Pounds (shipping weight)
- Item Model Number: CP-XP
- Power Source: Battery Powered
- Material: Metal (internal components)
- Manufacturer: DR-HO'S
- Technology: TENS, EMS, AMP (Auto-Modulating Pulse)
- Intensity Levels: 5
- Therapy Modes: 3
Warranty and Support
The Dr Ho's Circulation Promoter XP Deluxe Package comes with a 2-Year Warranty from the official DR-HO'S store, ensuring long-term reliability and support for your device. For any product inquiries, technical assistance, or warranty claims, please contact Dr Ho's customer support directly. Additional protection plans may be available for purchase to extend coverage.
For more information or to purchase additional accessories, visit the official Dr Ho's Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.