Zhongyu Zhongyu-222

Download PDF
Contents

Zhongyu Wheel Center Cap and Lug Nut Cover Kit for Tesla Models 3, S, X

Model: Zhongyu-222

1. Introduction

This manual provides instructions for the installation and care of your Zhongyu Wheel Center Cap and Lug Nut Cover Kit. This kit is designed to enhance the appearance of your Tesla vehicle's wheels while offering protection to the lug nuts.

2. Package Contents

Please verify that all components listed below are included in your package:

  • 4 x Wheel Hub Center Caps (Black & Silver)
  • 20 x Wheel Lug Nut Covers (Black)
  • 1 x Lug Nut Cover Puller Tool
All components of the Zhongyu Wheel Center Cap and Lug Nut Cover Kit, including four black and silver center caps, twenty black lug nut covers, and a red lug nut cover puller tool.
Image 2.1: Complete kit contents.

3. Compatibility

This kit is compatible with all Tesla Model 3, Model S, and Model X vehicles.

4. Features

  • Durable Construction: Manufactured from aluminum alloy and high-quality ABS plastic for longevity.
  • Weather Resistance: Designed to be waterproof, dust-proof, and anti-rust, suitable for various weather conditions.
  • Aesthetic Enhancement: The black and silver design provides a clean and sporty appearance to your vehicle's wheels.
Close-up view of four black and silver wheel hub center caps, showing their 56mm outer diameter and internal clips.
Image 4.1: Detail of the 56mm diameter wheel hub center caps.
Twenty black hexagonal lug nut covers and a red U-shaped lug nut cover puller tool.
Image 4.2: Detail of the black lug nut covers and puller tool.

5. Installation

Follow these steps for proper installation of the wheel center caps and lug nut covers:

  1. Prepare the Wheels: Ensure your vehicle's wheels are clean and free of dirt or debris, especially around the hub and lug nuts.
  2. Install Lug Nut Covers: Align each black lug nut cover with an exposed lug nut. Press firmly until the cover snaps securely into place. Repeat for all 20 lug nuts.
  3. Install Center Caps: Align each wheel hub center cap with the center opening of the wheel. Apply even pressure to push the cap into the opening until it sits flush and is securely fastened. The clips on the back of the cap will hold it in place.
  4. Verify Installation: Gently tug on each installed cover and cap to ensure they are firmly seated and will not dislodge during vehicle operation.
A hand demonstrating the installation of a black lug nut cover onto a wheel's lug nut.
Image 5.1: Demonstrating lug nut cover installation.
A Tesla wheel with the black and silver center cap and black lug nut covers fully installed, showcasing the enhanced appearance.
Image 5.2: Installed wheel center cap and lug nut covers.

6. Maintenance

To maintain the appearance and integrity of your wheel accessories:

  • Clean the caps and covers regularly with mild soap and water. Avoid harsh chemicals or abrasive cleaners.
  • Inspect the caps and covers periodically for any signs of damage or loosening, especially after driving on rough terrain or through car washes.
  • The lug nut cover puller tool can be used for safe removal of the lug nut covers when necessary, such as during tire rotation or wheel maintenance.

7. Troubleshooting

  • Difficulty Installing Lug Nut Covers: Ensure the lug nut is clean and free of rust or debris. Apply firm, even pressure. Do not force the cover if it does not align properly.
  • Loose Fit: If a lug nut cover or center cap feels loose after installation, remove it and re-install, ensuring proper alignment and sufficient pressure. If the issue persists, inspect the clips or internal structure for damage.
  • Difficulty Removing Lug Nut Covers: Use the provided lug nut cover puller tool. Insert the tool's prongs under the edge of the cover and gently pry it off. Avoid using sharp objects that could scratch the wheel or cover.

8. Specifications

SpecificationDetail
BrandZhongyu
Model NumberZhongyu-222
ColorBlack & Silver
MaterialAcrylonitrile Butadiene Styrene, Aluminum, Plastic
Installation TypeBolt-On (for lug nut covers), Snap-on (for center caps)
Item Weight3.98 ounces
Package Dimensions7.17 x 4.88 x 0.91 inches
UPC194229934311

9. Warranty and Support

Zhongyu provides the following support for this product:

  • 30-day money-back guarantee.
  • 365-day product support.
  • 24-hour customer service availability.

For assistance, please contact Zhongyu customer support.

© 2024 Zhongyu. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.