1. Introduction
Thank you for choosing the MERITLINE Twin Over Twin House Shaped Bunk Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bunk bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Important Safety Information
- Maximum Weight Capacity: The upper bed supports up to 175 lbs. The bottom bed supports up to 275 lbs. Do not exceed these limits.
- Mattress Thickness: For the upper bed, the recommended mattress thickness is 6 inches. For the bottom bed, the recommended mattress thickness is 8 inches.
- Guardrails: Ensure all guardrails are securely installed on the upper bunk to prevent falls.
- Ladder Safety: Always use the provided ladder for accessing the upper bunk. Do not use alternative climbing methods.
- Assembly: Assembly requires two people and approximately 2 hours. Additional tools, such as a screwdriver, may be required.
- Ventilation: Ensure adequate ventilation around the bed.
- No Jumping: Do not allow jumping on the bed.
- Regular Checks: Periodically check all bolts and connections to ensure they remain tight.
2. Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact MERITLINE customer support.
- Slats (for both upper and lower beds)
- Guardrails (for the upper bed)
- Ladder
- Assembly Hardware (bolts, screws, etc.)
- Assembly Tools (basic wrench/hex key usually included)
Note: Mattresses are not included with this bunk bed frame.
3. Assembly Instructions
Assembly is estimated to take 2 hours with two people. Please follow the detailed instructions provided in the separate assembly manual included in your package. The following images illustrate the assembled product and key features.

Figure 3.1: Front view of the assembled MERITLINE Twin Over Twin House Shaped Bunk Bed, showcasing its unique house design and low profile.

Figure 3.2: Angled view of the bunk bed, highlighting the pitched roof and playhouse-inspired wall with windows.

Figure 3.3: Direct front view of the bunk bed, showing the integrated ladder for access to the upper bunk.

Figure 3.4: Side angled view, providing a clearer look at the structure and the low-profile design of the bottom bunk.

Figure 3.5: Side view of the bunk bed, illustrating the sturdy wooden slats that support the mattresses on both levels.

Figure 3.6: Front view of the bunk bed frame without bedding, emphasizing the structural elements and guardrails.

Figure 3.7: Close-up detail of the house-shaped roof and decorative window on the upper bunk, adding to its playhouse aesthetic.

Figure 3.8: Close-up of the angled ladder and the wooden slats for the lower bed, demonstrating the secure construction.
4. Operating Instructions
This bunk bed is designed for sleeping and supervised play. Adhere to the following guidelines for safe operation:
- Ensure mattresses fit snugly within the bed frame to prevent gaps.
- Always use the ladder to access the upper bunk. Do not climb on the bed frame or guardrails.
- Do not hang items from the bed frame or guardrails that could pose a strangulation hazard.
- Supervise young children when they are using the bunk bed.
5. Care and Maintenance
Proper care will extend the life and appearance of your MERITLINE bunk bed.
- Cleaning: Clean the bed frame with a cloth dampened in a mild cleaner. Wipe dry immediately with a clean, soft cloth. Avoid harsh chemicals or abrasive cleaners.
- Hardware: Periodically check and tighten all bolts and screws to ensure the bed remains stable and secure.
- Avoid Moisture: Protect the wood from excessive moisture and direct sunlight to prevent warping or fading.
6. Troubleshooting
If you encounter any issues with your bunk bed, please refer to these common solutions:
- Squeaking Noises: Check all bolts and connections. Tighten any loose hardware. Ensure the bed is on a level surface.
- Instability: Verify that all components are correctly assembled according to the instructions. Ensure all bolts are fully tightened.
- Missing Parts: If you discover missing parts during assembly, do not proceed. Contact customer support for replacements.
7. Product Specifications

Figure 7.1: Detailed dimensions of the MERITLINE Twin Over Twin House Shaped Bunk Bed.
| Feature | Detail |
|---|---|
| Product Type | Bunk Bed |
| Size | Twin over Twin |
| Color | Grey |
| Material | Plywood, MDF, Pine Wood |
| Overall Product Dimensions | 77.4"L x 55.4"W x 82.2"H |
| Upper Bed Weight Capacity | 175 lbs |
| Bottom Bed Weight Capacity | 275 lbs |
| Recommended Upper Mattress Thickness | 6 inches |
| Recommended Bottom Mattress Thickness | 8 inches |
| Assembly Required | Yes (Estimated 2 hours, 2 people) |
| Included Components | Guardrails, Slats |
| Manufacturer | MERITLINE |
| UPC | 195358024805 |
8. Warranty and Support
This MERITLINE bunk bed comes with a 180-day warranty for any quality issues. If you encounter any problems or have questions regarding your product, please contact MERITLINE customer service. Please have your purchase information and model number ready when contacting support.
For further assistance, please refer to the contact information provided with your purchase or visit the official MERITLINE website.