Hanwha Techwin XNV-L6080 User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Hanwha Techwin XNV-L6080 2MP Full HD WDR PoE Network Outdoor Dome Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

Figure 1: Hanwha Techwin XNV-L6080 Dome Camera. This image shows the front view of the white dome camera with the lens visible through the clear dome cover.

The XNV-L6080 is a Wisenet X powered by Wisenet 5 network outdoor vandal dome camera, offering 2MP Full HD (1080p) resolution at 60fps. It features a motorized vari-focal lens (3.2~10mm) with 3.1x zoom, triple codec support (H.265/H.264/MJPEG) with WiseStream II technology, and 120dB WDR for clear images in challenging lighting conditions. Designed for outdoor use, it boasts IP66 and IK10 ratings for weather and vandal resistance.

2. Package Contents

Upon opening the product packaging, verify that all components are present and undamaged. The standard package for the XNV-L6080 includes:

• Hanwha Techwin XNV-L6080 Dome Camera Unit
• Installation Guide / Quick Start Guide
• Mounting Screws and Anchors
• Template for Mounting
• RJ45 Connector Cover (for weatherproofing)
• Hex Wrench (if applicable for adjustments)

If any items are missing or damaged, please contact your vendor or Hanwha Techwin customer support immediately.

3. Product Features

The Hanwha Techwin XNV-L6080 camera incorporates advanced features for superior surveillance performance:

• High Resolution: 2 Megapixel (1920 x 1080) resolution for clear and detailed imaging.
• Motorized Vari-Focal Lens: 3.2 ~ 10mm (3.1x) motorized lens allows for remote adjustment of zoom and focus.
• High Frame Rate: 60fps at all resolutions (H.265 / H.264) for smooth video capture.
• Efficient Codecs: Supports H.265, H.264, and MJPEG codecs with WiseStreamII technology for reduced bandwidth and storage requirements.
• Wide Dynamic Range (WDR): 120dB WDR compensates for extreme backlight conditions.
• Day & Night (ICR): Automatic switching between color and black & white modes with IR Cut Filter for optimal performance in varying light.
• Advanced Analytics: Includes tampering detection, defocus detection, motion detection, and handover functions.
• Local Storage: SD/SDHC/SDXC memory slot (Max. 256GB) for on-board recording.
• Specialized View: Hallway view support optimizes vertical video for narrow passages.
• Environmental Durability: Weatherproof IP66 and vandal-resistant IK10 ratings for outdoor deployment.
• Power over Ethernet (PoE): Simplifies installation by providing power and data over a single Ethernet cable.

4. Setup and Installation

Proper installation is crucial for the optimal performance and longevity of your camera. Ensure all safety precautions are followed.

4.1. Safety Precautions

• Disconnect power before installation or maintenance.
• Ensure the mounting surface can support the camera's weight.
• Do not expose the camera to extreme temperatures outside its operating range.
• Use only approved power sources (PoE or external 12V DC/24V AC if applicable).

4.2. Mounting the Camera

The XNV-L6080 is designed for ceiling or wall mounting. An optional mounting bracket may be required depending on the installation scenario.

1. Select a suitable mounting location that provides the desired field of view and is within reach of network cabling.
2. Use the provided mounting template to mark drill holes on the surface.
3. Drill pilot holes and insert anchors if necessary.
4. Secure the camera base or mounting bracket to the surface using the supplied screws.
5. Route the Ethernet cable through the designated opening in the camera base.

4.3. Network Connection and Power

The camera supports Power over Ethernet (PoE) for simplified cabling.

1. Connect an RJ45 Ethernet cable from a PoE-enabled switch or PoE injector to the camera's RJ45 port.
2. Ensure the RJ45 connector cover is properly installed to maintain the IP66 weather rating.
3. Once connected, the camera will power on and attempt to obtain an IP address via DHCP.

4.4. Initial Configuration

Access the camera's web interface for initial setup and configuration.

1. Use the Hanwha Techwin Device Manager software (available on the official website) to discover the camera on your network.
2. Open a web browser and enter the camera's IP address.
3. Log in using the default credentials (refer to the Quick Start Guide for default username/password). It is highly recommended to change the default password immediately for security.
4. Follow the on-screen prompts to set up basic network settings, date/time, and user accounts.
5. Adjust the motorized vari-focal lens for desired zoom and focus via the web interface.

5. Operating the Camera

Once installed and configured, the XNV-L6080 offers various operational modes and features.

5.1. Live View and Recording

• Access the live video feed through the camera's web interface or a compatible Network Video Recorder (NVR) / Video Management System (VMS).
• Configure recording schedules and events (e.g., continuous, motion-triggered) via the web interface or NVR/VMS.
• Insert an SD card (up to 256GB) into the camera's SD slot for local edge recording.

5.2. Image Settings

Adjust image quality settings to suit your environment and surveillance needs.

• WDR: Enable Wide Dynamic Range for scenes with high contrast lighting.
• Day/Night: Configure automatic or manual switching between color and black & white modes.
• Defog: Activate the defog function to improve image clarity in foggy or hazy conditions.
• Hallway View: Rotate the image 90 degrees for optimized viewing in vertical spaces.

5.3. Event Configuration

Set up various events to trigger actions such as recording, email notifications, or alarm outputs.

• Motion Detection: Define detection zones and sensitivity levels.
• Tampering Detection: Alerts if the camera's view is obstructed or tampered with.
• Defocus Detection: Notifies if the image becomes out of focus.

6. Maintenance

Regular maintenance ensures the camera's optimal performance and extends its lifespan.

• Cleaning: Gently clean the dome cover with a soft, damp cloth. Avoid abrasive cleaners.
• Firmware Updates: Periodically check the Hanwha Techwin website for the latest firmware versions. Updating firmware can improve performance, add features, and address security vulnerabilities.
• Cable Inspection: Regularly inspect network cables and connections for wear or damage, especially in outdoor environments.
• Environmental Check: Ensure the camera's operating environment remains within specified temperature and humidity ranges.

7. Troubleshooting

This section addresses common issues you might encounter with your XNV-L6080 camera.

7.1. No Power / Camera Not Responding

• Check PoE Connection: Ensure the Ethernet cable is securely connected to a PoE-enabled switch or injector. Verify the PoE source is active.
• Cable Integrity: Inspect the Ethernet cable for any damage. Try a different cable.
• Power Source: If using an external power adapter (not PoE), ensure it is correctly connected and providing the correct voltage.

7.2. No Video / Poor Image Quality

• Network Connectivity: Verify the camera has a valid IP address and is reachable on the network.
• Lens Focus: Access the web interface and use the motorized vari-focal lens controls to adjust focus.
• Dome Cover Cleanliness: Clean the outer dome cover if it's dirty or smudged.
• Lighting Conditions: Ensure sufficient lighting. If in low light, verify Day/Night mode is functioning correctly.
• WDR/Defog Settings: Adjust WDR and Defog settings in the web interface if image quality is poor due to challenging lighting or environmental conditions.

7.3. Cannot Access Web Interface

• IP Address: Confirm the camera's IP address using the Hanwha Techwin Device Manager.
• Network Settings: Ensure your computer is on the same network subnet as the camera.
• Firewall: Check if your computer's firewall is blocking access to the camera's IP address or port.
• Browser Compatibility: Try a different web browser.

7.4. Password Reset

If you forget your password, refer to the Hanwha Techwin official support documentation for the specific password reset procedure for your model, as it may involve a physical reset button or a software utility.

8. Specifications

Detailed technical specifications for the Hanwha Techwin XNV-L6080 camera:

9. Warranty Information

Hanwha Techwin products are covered by a limited warranty. The specific terms and duration of the warranty may vary by region and product type. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please visit the official Hanwha Techwin website or contact their customer support. Unauthorized repairs or modifications may void the warranty.

10. Support and Contact

For technical assistance, product inquiries, or further support, please utilize the following resources:

• Official Website: Visit the Hanwha Vision (formerly Hanwha Techwin) website for product documentation, software downloads, and FAQs.
• Customer Support: Refer to the contact section on the official website for phone numbers or email addresses for your region.
• Online Resources: Explore online forums or knowledge bases for community support and additional troubleshooting tips.