1. Introduction and Overview
The Frigidaire FPPWFU01 PurePour PWF-1 Water Filter is designed to provide clean, great-tasting water directly from your refrigerator. This filter reduces up to 99% of contaminants, offering a safer and more cost-effective alternative to bottled water. It is NSF & WQA certified, ensuring high standards of filtration performance.
2. Key Features and Benefits
- Contaminant Reduction: Reduces up to 99% of various contaminants including Mercury, Lead, Asbestos, BPA, Chlorine Taste & Odor, Pesticides, and Pharmaceuticals.
- Certified Quality: NSF & WQA certified for performance and sustainability.
- Perfect Fit: Engineered by Frigidaire for a precise fit in compatible refrigerators, ensuring optimal performance and leak protection.
- Cost-Effective: Provides clean water directly from your refrigerator, reducing the need for expensive bottled water.
3. Model Compatibility
This filter is compatible with various Frigidaire refrigerator models. Always verify your refrigerator's model number to ensure proper fit and function. The FPPWFU01 filter is designed for specific Frigidaire, Frigidaire Gallery, and Frigidaire Professional refrigerators.
4. Setup and Installation
Follow these steps to install your new Frigidaire FPPWFU01 PurePour PWF-1 Water Filter:
- Remove Current Filter: Locate the water filter compartment inside your refrigerator. Push the current filter firmly to release it, then remove and discard it.
- Prepare New Filter: Remove any plastic caps or protective coverings from the new FPPWFU01 filter.
- Insert New Filter: Slide the new filter into the housing with the grip oriented horizontally. Push the filter firmly and turn it 90 degrees to the right until it snaps into place. The grip should now be oriented vertically.
- Prime the Filter: Run water through the dispenser for approximately 3 minutes, or 1.95 gallons (7.4 liters), to prime the filter. This flushes out air and any loose carbon particles. Discard this initial water.
- Reset Filter Indicator: Reset the water filter indicator light on your refrigerator's control panel. Refer to your refrigerator's manual for specific instructions on how to reset the indicator.
Installation Video Guides
Video: How to change your Frigidaire Water Filter
This video demonstrates the process of replacing your Frigidaire water filter, including removing the old filter and inserting the new one.
Video: Frigidaire PurePour PWF-1 Water Filter Replacement
A step-by-step guide on replacing the Frigidaire PurePour PWF-1 water filter in a compatible refrigerator model.
5. Operating Instructions
Once installed, the Frigidaire FPPWFU01 PurePour PWF-1 Water Filter operates automatically with your refrigerator's water and ice dispenser. Simply use the dispenser as you normally would to access filtered water and ice.
6. Maintenance
For optimal performance and water quality, it is crucial to replace your Frigidaire FPPWFU01 PurePour PWF-1 Water Filter every 6 months or after dispensing 125 gallons (473 liters), whichever comes first. Your refrigerator's filter indicator light will typically signal when a replacement is due.
After replacing the filter, always remember to reset the filter indicator on your refrigerator's control panel to ensure accurate tracking of the new filter's lifespan.
7. Troubleshooting
- Air Bubbles or Cloudy Water: It is normal to experience air bubbles or slightly cloudy water immediately after installing a new filter. This is due to air trapped in the system and fine carbon particles. Continue to run water through the dispenser until the water runs clear, typically for 3 minutes or 1.95 gallons.
- Slow Water Flow: A noticeable decrease in water flow from the dispenser often indicates that the filter is clogged and needs to be replaced.
- Filter Not Fitting: Ensure you have purchased the correct model (FPPWFU01) for your refrigerator. Refer to the model compatibility section or your appliance manual.
8. Specifications
| Specification | Detail |
|---|---|
| Material | Plastic |
| Product Dimensions | 2.3"D x 2.3"W x 9.5"H |
| Item Weight | 7.68 ounces |
| External Testing Certification | NSF 401 – Reduces 1 or more of 15 emerging contaminants |
| Rated Capacity | PurePour-H: 125 gallons (473 L), PurePour-U: 200 gallons (757 L) |
| Flow Rate | 0.65 GPM (2.46 L/min) |
| UPC | 012505468094 |
9. Warranty and Support
The Frigidaire FPPWFU01 PurePour PWF-1 Water Filter comes with a Limited Warranty. For specific details regarding your warranty coverage, please refer to the documentation included with your product or visit the official Frigidaire website.
For product questions, parts, or service, visit www.frigidaire.com or call toll-free at (800) 374-4432 (US) or (800) 265-8352 (Canada).
10. Genuine Filters and Counterfeit Warning
Always use genuine Frigidaire filters to ensure optimal performance, safety, and to maintain your refrigerator's warranty. Counterfeit filters may not provide adequate filtration and could potentially damage your appliance or compromise water quality.
How to Spot a Counterfeit Filter:
- Weight: Counterfeits often weigh less than genuine filters.
- Certification Symbol: Genuine filters are independently certified and will have the appropriate certification symbols (e.g., NSF) stamped on the package.
- Packaging: Counterfeit packaging may appear nearly identical but can have subtle differences in print quality, color, or text.
- Online Content: Be cautious of listings with poor quality images or vague descriptions.
11. Environmental Impact
Choosing a Genuine Frigidaire water filter is an environmentally conscious decision. By replacing bottled water with filtered water from your refrigerator, you contribute to reducing plastic waste. It is estimated that using water filters has saved millions of plastic bottles from landfills, as each plastic bottle can take an estimated 450 years to biodegrade.
