1. Introduction
Thank you for choosing the BASIC HALO Split Air Conditioner. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new air conditioning unit. Please read this manual thoroughly before using the appliance and retain it for future reference.
This unit is designed to provide comfortable cooling and heating (if applicable) for your indoor environment, featuring a 18400 BTU capacity and integrated Wi-Fi for smart control.
2. Safety Information
Always observe the following basic precautions to reduce the risk of fire, electric shock, or injury:
- Read all instructions before use.
- This appliance must be properly grounded.
- Do not operate the unit with wet hands.
- Ensure the power supply matches the unit's specifications (220V).
- Do not insert objects into the air outlet or inlet.
- Keep children away from the unit.
- Professional installation is highly recommended to ensure proper setup and safety.
- Turn off the power supply before cleaning or performing any maintenance.
3. Product Overview
The BASIC HALO Split Air Conditioner consists of an indoor unit, an outdoor unit, and a remote control. It offers various modes for optimal climate control.
Figure 3.1: Indoor Unit and Remote Control. The indoor unit distributes conditioned air, while the remote allows for convenient control of settings.
Figure 3.2: Outdoor Unit. This unit houses the compressor and condenser, responsible for heat exchange with the outside environment.
Figure 3.3: Front view of the HALO Indoor Unit, showcasing its sleek design and display area.
Figure 3.4: Indoor Unit highlighting the Wi-Fi connectivity feature, allowing for smart control.
4. Setup
Proper installation is crucial for the performance and longevity of your air conditioner. It is strongly recommended that installation be performed by a qualified professional.
4.1 Installation Steps (Professional Recommended)
- Select Location: Choose appropriate locations for both indoor and outdoor units, ensuring proper airflow and drainage.
- Mount Indoor Unit: Securely mount the indoor unit to the wall, ensuring it is level.
- Install Outdoor Unit: Place the outdoor unit on a stable, level surface, away from direct sunlight or obstructions.
- Connect Refrigerant Pipes: Connect the copper refrigerant pipes between the indoor and outdoor units. Ensure connections are tight and leak-free.
- Electrical Wiring: Connect the electrical wiring according to the wiring diagram provided in the full installation manual. Ensure proper grounding.
- Drainage Pipe Installation: Install the drainage pipe from the indoor unit to ensure proper condensation removal.
- Vacuum and Test: Evacuate the refrigerant lines to remove air and moisture, then test the unit for proper operation.
4.2 Initial Power-On
After professional installation, ensure all connections are secure. Turn on the main power supply to the unit. The unit will typically perform a self-check. You can then use the remote control or the Wi-Fi app to begin operation.
5. Operating Instructions
Your HALO Split Air Conditioner offers various modes and settings for optimal comfort. Use the remote control or the Wi-Fi app to adjust settings.
5.1 Remote Control Functions
- Power Button: Turns the unit ON or OFF.
- Mode Button: Cycles through operating modes: Cool, Heat (if applicable), Fan, Dry, Auto.
- Temperature Buttons (▲/▼): Adjusts the desired temperature.
- Fan Speed Button: Selects fan speed (Auto, Low, Medium, High).
- Swing Button: Controls the vertical louver movement for air direction.
- Timer Button: Sets the ON/OFF timer for scheduled operation.
- Sleep Mode: Adjusts temperature and fan speed for comfortable sleep.
- Wi-Fi Button: Activates or deactivates the Wi-Fi function for smart control.
5.2 Wi-Fi Connectivity
The unit features Wi-Fi connectivity for remote control via a smartphone application. Follow these general steps to connect:
- Download the official BASIC HALO smart app from your device's app store.
- Ensure your air conditioner is powered on and the Wi-Fi function is activated (refer to remote control).
- Follow the in-app instructions to add your device, which typically involves connecting to the unit's temporary Wi-Fi network and then configuring it to join your home Wi-Fi network.
- Once connected, you can control the unit from anywhere using the app.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your air conditioner.
6.1 Air Filter Cleaning
Clean the air filters every two weeks or more frequently if the unit is used heavily or in dusty environments.
- Turn off the power supply to the unit.
- Open the front panel of the indoor unit.
- Remove the air filters.
- Wash the filters with lukewarm water and a mild detergent. Rinse thoroughly.
- Allow the filters to dry completely in a shaded area before reinserting them.
- Close the front panel and restore power.
6.2 Outdoor Unit Cleaning
Periodically check the outdoor unit for debris, leaves, or dirt that may obstruct airflow. Carefully remove any obstructions. Do not spray water directly onto the electrical components.
6.3 General Cleaning
Wipe the indoor unit's surface with a soft, dry cloth. For stubborn stains, use a damp cloth with a mild detergent, then wipe dry. Do not use harsh chemicals or abrasive cleaners.
7. Troubleshooting
Refer to the table below for common issues and their potential solutions. If the problem persists, contact qualified service personnel.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not start | No power supply; Remote control batteries low; Timer function active. | Check power connection and circuit breaker; Replace remote batteries; Cancel timer setting. |
| Insufficient cooling/heating | Dirty air filters; Blocked air inlet/outlet; Room too large; Doors/windows open; Temperature setting incorrect. | Clean air filters; Remove obstructions; Ensure room size is appropriate; Close doors/windows; Adjust temperature setting. |
| Unusual noise | Loose parts; Unit not level; Foreign object in fan. | Check for loose parts and tighten; Ensure unit is level; Turn off and inspect for foreign objects (contact service if unsure). |
| Water leakage from indoor unit | Clogged drain pipe; Improper installation. | Clear drain pipe obstruction; Contact installer for inspection. |
| Wi-Fi connection issues | Router issues; Incorrect Wi-Fi password; Unit too far from router. | Restart router; Re-enter Wi-Fi password in app; Move unit closer to router or use a Wi-Fi extender. |
8. Specifications
Detailed technical specifications for the BASIC HALO Split Air Conditioner, Model BSACH-F18CD.
| Feature | Specification |
|---|---|
| Brand Name | BASIC |
| Model Information | BSACH-F18CD-I, BSACH-F18CD-O |
| Product Dimensions | 99.1 x 61.2 x 44.1 cm; 62 Kilograms |
| Efficiency | High |
| Capacity | 1.54 cubic feet |
| Annual Energy Consumption | 4909 Kilowatt Hours |
| Installation Type | Split System |
| Part Number | BSACH-F18CD |
| Form Factor | Mini Split |
| Special Features | Heating and Cooling Function |
| Color | White |
| Voltage | 220 Volts |
| Wattage | 560 Watts |
| Included Components | None |
| Batteries Included? | No |
| Batteries Required? | Yes |
| Item Weight | 62 Kilograms |
| Cooling Capacity | 18400 British Thermal Units |
| Power Source | Corded Electric |
| Model Name | BSACD F18CD |
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or contact your local dealer. Keep your purchase receipt as proof of purchase.
For technical support, service, or spare parts, please contact BASIC customer service through their official website or the contact information provided at the point of purchase. When contacting support, please have your model number (BSACH-F18CD) and serial number ready.
