Introduction
This manual provides essential instructions for the safe and efficient use of your FDTEK Power Strip with USB. Please read this manual thoroughly before operating the device and retain it for future reference.
Product Features
- Versatile Charging: Equipped with 4 AC outlets and 3 USB charging ports (2 USB-A, 1 USB-C) to power up to 7 devices simultaneously.
- Space-Saving Design: Cube shape with outlets on different sides allows for efficient use of space and accommodates large adapters without blocking adjacent ports.
- Smart USB Charging: Built-in Smart IC technology automatically identifies connected devices and optimizes current distribution for efficient charging (total 5V 2.4A output for USB-A ports).
- Enhanced Safety: Features overload protection, over-current protection, over-voltage protection, short-circuit protection, and a circuit breaker. Constructed with ABS PC fire-retardant material (rated up to 1382℉/750℃).
- Flat Plug Design: The 5-foot extension cord features a 45-degree flat plug, allowing for easier access to outlets behind furniture and preventing obstruction of other wall receptacles.
- Power Control: An integrated on/off switch on the top of the power strip allows for convenient power management and energy saving.
- Compact and Portable: Its small size makes it suitable for desktop use, travel, home, office, and is approved for cruise ship use due to its non-surge protection design.
Setup Instructions
- Unpack the Device: Carefully remove the power strip from its packaging.
- Choose a Location: Select a stable, dry location for the power strip, away from water sources and excessive heat. Ensure adequate ventilation.
- Connect to Power: Plug the power strip's flat plug into a standard 110V-125V AC wall outlet. The flat plug design allows for discreet placement.
- Power On: Press the power switch located on the top of the power strip to turn it on.
Image: The FDTEK Power Strip showing its cube design and flat plug, ready for connection.
Operating Instructions
The FDTEK Power Strip is designed for ease of use, providing multiple power and charging options.
Using AC Outlets:
- Plug your devices (e.g., laptops, lamps, small appliances) into any of the 4 AC outlets located on the sides of the power strip.
- The multi-directional design ensures that even large power adapters can be used simultaneously without obstructing other outlets.
Image: A diagram illustrating the 360-degree arrangement of AC outlets on the power strip, allowing multiple devices to be plugged in without interference.
Using USB Charging Ports:
- Connect your USB-powered devices (e.g., smartphones, tablets, smartwatches) to the 2 USB-A ports or 1 USB-C port on the top of the power strip.
- The built-in Smart IC technology will automatically detect your device and deliver the optimal charging current.
Image: The FDTEK Power Strip with a smartphone and smartwatch connected to its USB ports for charging.
Power Switch:
- Use the power switch on the top of the unit to turn all connected devices on or off simultaneously. This helps conserve energy when devices are not in use.
Safety Information
Your FDTEK Power Strip is equipped with multiple safety features to protect your devices and ensure safe operation. Please adhere to the following guidelines:
- Overload Protection: The power strip includes an overload protection system that will automatically shut off power if the total current draw exceeds its maximum rating (1250W, 125V~10A). If this occurs, disconnect some devices and press the power switch to reset.
- Fire-Retardant Material: The casing is made from ABS PC fire-retardant material, capable of withstanding temperatures up to 1382℉ (750℃).
- Grounding: Ensure the power strip is plugged into a properly grounded outlet.
- Indoor Use Only: This device is intended for indoor use in dry locations only. Do not expose to moisture or liquids.
- Avoid Overloading: Do not exceed the maximum power rating of 1250W.
- Children and Pets: Keep out of reach of children and pets.
- Disassembly: Do not attempt to disassemble or modify the power strip. Refer all servicing to qualified personnel.
Image: An exploded view diagram highlighting the 7-point safety system components, including short-circuit protection, grounded protection, over-temperature control, over-current protection, fire-resistance, over-voltage protection, and reinforced cable.
Specifications
| Feature | Detail |
|---|---|
| Model Number | MFPC-008WUS |
| AC Outlets | 4 |
| USB Ports | 3 (2 USB-A, 1 USB-C) |
| USB-A Output | 5V 2.4A (Total) |
| Rated Power | 1250W |
| Rated Voltage | 110-125V |
| Rated Current | 10A |
| Cord Length | 5 FT |
| Product Dimensions | 3.35 (H) x 3.27 (W) x 3.27 (D) inches |
| Item Weight | 11.7 ounces |
| Material | ABS PC Fire-Retardant |
| Special Feature | On/Off Switch, Flat Plug, Non-Surge Protection |
Image: A detailed view of the FDTEK Power Strip showing its dimensions (approximately 3.35 inches height, 3.27 inches width/depth) and cord length (5 FT).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to outlets/USB ports. | 1. Power switch is off. 2. Power strip is not plugged in. 3. Overload protection activated. | 1. Press the power switch to the 'On' position. 2. Ensure the power strip is securely plugged into a live wall outlet. 3. Disconnect some devices, then press the power switch to reset the overload protector. |
| USB devices not charging or charging slowly. | 1. Device cable is faulty. 2. Device requires more power than available. 3. USB port is damaged. | 1. Try a different USB cable. 2. Ensure the device is compatible with 5V 2.4A charging. Some devices may charge slower if they require higher wattage. 3. Contact customer support if other solutions fail. |
| Power strip feels warm. | Normal operation with multiple devices. | A slight warmth is normal. If it becomes excessively hot or emits a burning smell, immediately unplug all devices and the power strip, then contact customer support. |
Warranty and Support
The FDTEK Power Strip includes a Connected Equipment Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or visit the official FDTEK website.
For technical support, troubleshooting assistance, or warranty claims, please contact FDTEK customer service through the following channels:
- Online Support: Visit the FDTEK Brand Store on Amazon.
- Email Support: Refer to your product packaging or the FDTEK website for contact email.
Please have your model number (MFPC-008WUS) and purchase information ready when contacting support.