1. Introduction
Thank you for choosing the HOFTRONIC T8 IP65 LED Tube Light Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting product. Please read these instructions carefully before installation and retain them for future reference.
This fixture is designed for use in damp environments such as garages, warehouses, and outdoor areas, offering reliable and efficient illumination.
2. Safety Instructions
- Electrical Safety: Installation should only be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before any installation, maintenance, or repair work.
- Voltage: Verify that the supply voltage matches the fixture's specified voltage (220-240V AC).
- IP65 Rating: The fixture is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. Ensure all seals and cable glands are properly secured during installation to maintain this rating.
- Mounting: Mount the fixture securely on a stable surface. Do not install on surfaces that are prone to vibration or excessive heat.
- Heat: Do not cover the fixture with insulating material. Ensure adequate ventilation around the unit.
- Damage: Do not operate the fixture if it is damaged. Contact customer support for assistance.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, contact your retailer.
Image: Package contents including the fixture, LED tubes, wall plugs, mounting screws, and brackets.
- 1x HOFTRONIC IP65 LED Fixture (Double, 120cm)
- 2x HOFTRONIC LED T8 Tubes (18W, 140lm/W, 120cm, 4000K)
- 4x Wall Plugs
- 4x Mounting Screws
- 2x Stainless Steel Mounting Brackets
- 2x LED Starters (for T8 tubes)
4. Product Overview
The HOFTRONIC T8 IP65 LED Tube Light Fixture is a robust and energy-efficient lighting solution. It features a durable polycarbonate enclosure and stainless steel clamps, making it suitable for challenging environments.
Image: Front view of the HOFTRONIC T8 IP65 LED Tube Light Fixture.
Image: Rear view of the fixture, illustrating the mounting points and cable entry gland.
Key Features:
- IP65 Water & Dust Resistant: The fixture's enclosure and stainless steel clamps ensure protection against dust and water, making it ideal for indoor and outdoor use.
- IK06 Impact Resistance: Constructed with high-impact polycarbonate, the fixture offers enhanced durability and a long lifespan.
- G13 Fitting & Linkable: The fixture is equipped with G13 fittings, compatible with T8 LED tubes. Multiple fixtures can be linked in series for extended lighting coverage.
- Flicker-Free LED Driver: Features a patented design that provides stable light output, reducing eye strain and headaches.
- LED Starter Included: Easily retrofit traditional tube light fixtures with the included LED starter.
Image: Visual representation of the fixture's IP65 water and dust resistance.
Image: Highlighting the IK06 rating and robust polycarbonate construction.
Image: Close-up of the G13 fitting, showing its design for T8 LED tubes and series linking capability.
Image: Detail of the LED tube, highlighting the flicker-free technology and 140 lumen/Watt efficiency.
Image: Close-up of the LED starter, showing its 0.5A 250V/AC specifications.
5. Setup and Installation
Important: Ensure the main power supply is switched off before commencing installation.
- Choose Location: Select a suitable mounting location, ensuring it is a stable surface capable of supporting the fixture's weight.
- Mark Drilling Points: Use the mounting brackets to mark the drilling points on the chosen surface.
- Drill Holes: Drill holes at the marked points and insert the wall plugs.
- Attach Brackets: Secure the stainless steel mounting brackets to the surface using the provided screws.
- Mount Fixture: Carefully attach the LED fixture to the mounted brackets.
- Wiring: Open the wiring compartment. Connect the main power supply cable to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth). Use the cable gland to maintain the IP65 rating.
- Insert LED Tubes: Insert the two T8 LED tubes into the G13 fittings. Ensure they are securely twisted into place.
- Install LED Starters: Replace any existing fluorescent starters with the provided LED starters.
- Close Fixture: Close the wiring compartment and ensure all clips are securely fastened to maintain the IP65 seal.
- Test: Restore power and test the fixture.
6. Operating Instructions
The HOFTRONIC T8 IP65 LED Tube Light Fixture operates by connecting it to a standard 220-240V AC power supply. Once installed and connected to a switch, simply toggle the switch to turn the light on or off.
This fixture is not dimmable.
7. Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals and cable glands remain intact to maintain the IP65 rating.
- Tube Replacement: The LED tubes have a long lifespan of approximately 50,000 hours. If replacement is necessary, ensure power is off and use compatible T8 LED tubes with G13 bases.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty LED tube | Check power switch and circuit breaker Verify all wiring connections are secure (ensure power is off) Replace LED tube with a known working one |
| Light flickers | Loose LED tube Incompatible starter (if retrofitting) Power supply instability | Ensure LED tube is securely seated Confirm the correct LED starter is used Consult an electrician to check power supply |
| Water ingress | Improperly sealed cable gland or clips Damaged housing | Ensure all seals and cable glands are tightened correctly Inspect housing for cracks; replace fixture if damaged |
9. Specifications
Image: Detailed product data sheet.
| Feature | Specification |
|---|---|
| Brand | HOFTRONIC |
| Model Number | 512559 |
| Product Dimensions (L x W x H) | 127.2 x 10.2 x 7.3 cm |
| Item Weight | 5 Kilograms |
| Material | Aluminum, Plastic |
| Color | White |
| Style | Modern |
| Bulb Type | LED (T8 tubes) |
| Number of Bulbs | 2 |
| Voltage | 220-240 Volts AC |
| Power | 36 Watts (2 x 18W LED tubes) |
| Luminous Flux | 5040 lm |
| Color Temperature | 4000 Kelvin (Neutral White) |
| Color Rendering Index (CRI) | > 80 Ra |
| Beam Angle | 140° |
| Power Factor | > 0.95 |
| Energy Efficiency Class (Old) | A++ |
| Energy Efficiency Class (New) | C |
| IP Rating | IP65 (Waterproof) |
| Dimmable | No |
| Operating Temperature | -20 °C to 45 °C |
| Switching Cycles | 100,000 cycles |
| Average Lifespan | 50,000 Hours |
| Certifications | CE, EMC, RoHS, TÜV, LM80 |
| Installation Type | Wall Mount |
| Indoor/Outdoor Use | Outdoor |
Image: EU Energy Label. For more details, visit eprel.ec.europa.eu/qr/1548106
10. Warranty and Support
HOFTRONIC provides a 5-year warranty for this product, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For technical assistance, warranty claims, or any questions regarding your HOFTRONIC product, please contact your retailer or visit the official HOFTRONIC website for customer support information.