HOFTRONIC Selma Wall Light User Manual

1. Product Overview

The HOFTRONIC Selma wall light is a modern and durable outdoor lighting solution designed to provide both upward and downward illumination. Constructed from high-quality, maintenance-free aluminum with an AKZO-Nobel powder coating, this fixture is built to withstand outdoor elements.

Key Features:

• Durable Outdoor Design: Made from maintenance-free aluminum with UV and moisture-resistant AKZO-Nobel powder coating, ensuring no discoloration or flaking.
• Interchangeable Light Source: Equipped with two GU10 fittings, allowing users to select their preferred LED light color and intensity.
• IP65 Waterproof Rating: Features high-quality rubber seals to prevent moisture, dust, snow, and ice ingress, making it suitable for various weather conditions.
• Dimmable: Supports dimmable GU10 bulbs for adjustable light output.
• Easy Installation: Comes with all necessary mounting materials for quick setup.

Figure 1.1: HOFTRONIC Selma wall light providing up and down illumination.

Figure 1.2: The Selma wall light installed on an outdoor brick wall, showcasing its application.

Figure 1.3: Visual representation of the IP65 water and dust resistance rating.

2. Safety Instructions

Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always disconnect power at the main circuit breaker before installation, maintenance, or changing bulbs.
• Installation should be performed by a qualified electrician in accordance with local electrical codes.
• Ensure the mounting surface is structurally sound and can support the weight of the fixture.
• Do not exceed the maximum wattage specified for GU10 bulbs.
• This product is designed for outdoor use with an IP65 rating. Ensure all seals are properly seated during installation to maintain this rating.
• Do not modify the fixture in any way. Unauthorized modifications may void the warranty and create safety hazards.
• Keep packaging materials out of reach of children.

3. Package Contents

Verify that all components listed below are present in your package:

• 1x HOFTRONIC Selma LED Wall Light (White)
• 1x Allen Key
• 2x Screws
• 2x Washers
• 2x Wall Plugs

Figure 3.1: All components included in the package.

4. Installation Guide

Follow these steps for proper installation of your HOFTRONIC Selma wall light:

1. Prepare the Installation Area: Ensure the power supply to the installation area is turned off at the main circuit breaker. Mark the desired mounting location on the wall.
2. Measure and Drill: Use the provided mounting plate diagram (Figure 4.1) to mark the drilling points. The distance between the two mounting holes is approximately 118 mm. Drill two holes of 5 mm diameter for the wall plugs.
3. Insert Wall Plugs: Insert the wall plugs into the drilled holes.
4. Connect Wiring: Open the wiring compartment of the fixture. Connect the live (L), neutral (N), and ground (PE) wires from your electrical supply to the corresponding terminals inside the fixture. Ensure all connections are secure. The cable inlet has a maximum diameter of 12 mm.
5. Mount the Fixture: Align the fixture with the wall plugs. Secure the fixture to the wall using the provided screws and washers. Tighten firmly but do not overtighten.
6. Install GU10 Bulbs: Insert two GU10 LED bulbs (not included) into the GU10 fittings. Ensure they are securely twisted into place.
7. Restore Power: Once installation is complete and all connections are secure, restore power at the main circuit breaker. Test the light fixture.

Figure 4.1: Mounting plate details with dimensions (118mm between holes, 5mm diameter holes, 12mm max cable inlet).

Figure 4.2: Product dimensions: 163mm height, 78mm width, 69mm depth.

5. Operation

The HOFTRONIC Selma wall light operates by connecting to your standard electrical supply (AC/DC 230 Volts). Once installed and powered, the light will illuminate. If you have installed dimmable GU10 bulbs and connected the fixture to a compatible dimmer switch (not included), you can adjust the light intensity as desired.

To change the light color or replace a bulb, ensure the power is disconnected at the main circuit breaker, then carefully twist and remove the GU10 bulb from its fitting. Insert the new GU10 bulb and twist to secure it.

6. Maintenance

To ensure the longevity and optimal performance of your HOFTRONIC Selma wall light, follow these simple maintenance guidelines:

• Cleaning: Regularly wipe the fixture with a soft, damp cloth to remove dust and dirt. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the seals around the bulb and wiring compartment are intact to maintain the IP65 rating.
• Bulb Replacement: When replacing GU10 bulbs, always ensure the power is off. Use only GU10 LED bulbs.

7. Troubleshooting

If you encounter issues with your wall light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact HOFTRONIC customer support.

8. Technical Specifications

9. Warranty and Support

HOFTRONIC stands by the quality of its products. The Selma wall light comes with a 3-year warranty from the date of purchase. During this period, any defects will be replaced free of charge.

For warranty claims, technical support, or any questions regarding your product, please contact HOFTRONIC customer service through the retailer where you purchased the product or visit the official HOFTRONIC website for contact information.

Please retain your proof of purchase for warranty purposes.