HOFTRONIC 120cm 18W T8 G13 LED Tube Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your HOFTRONIC 120cm 18W T8 G13 LED Tube. Please read this manual thoroughly before installation and retain it for future reference. This LED tube is designed for high efficiency, long lifespan, and flicker-free illumination, making it suitable for various applications such as workshops, warehouses, offices, and more.

A close-up view of the HOFTRONIC 120cm T8 G13 LED Tube, showing its G13 base and smooth, white finish.

2. Safety Information

• Electrical Safety: Installation should only be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation or maintenance.
• Compatibility: This LED tube is designed for use with 230V main power and magnetic ballasts (KVG). It is NOT compatible with electronic ballasts (EVG) or high-frequency ballasts. Using the tube with incompatible ballasts may cause damage to the product or pose a safety risk.
• Single-Ended Power Input: The tube requires power input at one end only. Refer to the markings on the tube for the correct AC input end.
• Operating Environment: Do not expose the LED tube to excessive moisture or extreme temperatures outside its specified operating range.
• Physical Handling: Handle the tube with care to avoid breakage. Do not apply excessive force to the tube or its pins.

A diagram showing compatibility with 230V main power and magnetic ballasts (KVG), and incompatibility with electronic (EVG) and high-frequency ballasts. This is crucial for correct installation.

3. Setup and Installation

This LED tube is designed to replace traditional fluorescent tubes in existing fixtures. A special LED starter is included for easy retrofit.

1. Disconnect Power: Before beginning installation, ensure the main power supply to the fixture is completely turned off at the circuit breaker.
2. Remove Old Fluorescent Tube: Carefully remove the existing fluorescent tube from the fixture.
3. Replace Starter: Locate the traditional starter in your fixture. Remove it and replace it with the included LED starter. The LED starter is specifically designed for LED tubes and is essential for proper operation with magnetic ballasts.
4. Insert LED Tube: Insert the HOFTRONIC LED tube into the fixture. Ensure the end marked for AC input is connected to the live side of the fixture. The tube has a single-ended power input.
5. Restore Power: Once the tube is securely in place and the starter is replaced, restore power to the fixture. The LED tube should illuminate instantly.

The included LED starter, designed for easy retrofit into existing fluorescent tube fixtures. It replaces the traditional starter.

4. Operating Instructions

The HOFTRONIC LED tube offers instant full brightness upon activation. It also features an adjustable wattage setting for flexible light output.

• Instant On: Unlike traditional fluorescent tubes, this LED tube provides immediate full illumination without any warm-up time or flickering.
• Adjustable Wattage: The LED tube is equipped with a built-in power switch that allows you to select between 12W and 18W power consumption. This adjustment changes the luminous flux from 2400 lumens to 3600 lumens, providing control over the light intensity. To adjust, ensure the power is off, then locate the switch on the end cap and select your desired wattage.

Detail of the LED tube's end cap, illustrating the built-in switch for adjusting power output between 12W and 18W. This allows for flexible light intensity.

Image highlighting the flicker-free technology of the HOFTRONIC LED tube, ensuring stable light output for reduced eye strain.

5. Maintenance

The HOFTRONIC LED tube requires minimal maintenance due to its long lifespan and durable construction.

• Cleaning: Ensure the power is disconnected before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the tube. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate cover.
• No User-Serviceable Parts: The LED tube contains no user-serviceable parts. Do not attempt to open or repair the tube, as this will void the warranty and may pose a safety hazard.
• Disposal: At the end of its lifespan, dispose of the LED tube according to local regulations for electronic waste.

6. Troubleshooting

If you encounter issues with your HOFTRONIC LED tube, please refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact HOFTRONIC customer support.

7. Specifications

The EU energy label for the HOFTRONIC LED Tube, indicating an energy efficiency class of A and power consumption of 18 kWh/1000h. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/739069.

8. Warranty

The HOFTRONIC 120cm 18W T8 G13 LED Tube comes with a 10-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

9. Customer Support

For any questions, technical assistance, or warranty claims regarding your HOFTRONIC LED tube, please contact our customer support team. We are committed to responding to your inquiries within 24 hours.

Please refer to the HOFTRONIC official website or your purchase documentation for specific contact details.