PlayMates 81440

PlayMates Teenage Mutant Ninja Turtles: Retro Rotocast Sewer Lair 6-Piece Action Figure Set Instruction Manual

Model: 81440

Introduction

This manual provides essential information for the PlayMates Teenage Mutant Ninja Turtles: Retro Rotocast Sewer Lair 6-Piece Action Figure Set. It covers product contents, setup, usage, care, and specifications to ensure proper enjoyment and longevity of your action figures.

PlayMates TMNT Retro Rotocast Sewer Lair 6-Piece Action Figure Set packaging

Image: The complete PlayMates Teenage Mutant Ninja Turtles Retro Rotocast Sewer Lair 6-Piece Action Figure Set packaging, designed to resemble the iconic Sewer Lair.

Product Contents

The PlayMates Retro Rotocast Sewer Lair 6-Piece Action Figure Set includes the following items:

Setup and Assembly

  1. Unboxing: Carefully remove the outer Sewer Lair-inspired soft package.
  2. Figure Removal: Each action figure is individually packaged in a blister card. Gently detach each figure from its blister card.
  3. Accessory Attachment:
    • For Leonardo, attach the two katanas to his hands or belt.
    • For Donatello, attach the bo staff to his hands.
    • For Michelangelo, attach the two nunchaku to his hands or belt.
    • For Raphael, attach the two sai to his hands or belt.
    • For Splinter, attach the bow and arrow to his hands.
  4. Display: Position the figures as desired for display or play.
Leonardo action figure in blister card packaging

Image: Leonardo action figure shown in its individual blister card packaging.

Leonardo action figure with katanas

Image: Leonardo action figure with his signature katanas.

Donatello action figure with bo staff

Image: Donatello action figure holding his bo staff.

Michelangelo action figure with nunchaku

Image: Michelangelo action figure with his nunchaku.

Raphael action figure with sai

Image: Raphael action figure with his sai.

Splinter action figure with bow and arrow

Image: Splinter action figure holding a bow and arrow.

Shredder action figure

Image: Shredder action figure in a dynamic pose.

Operating and Usage

These action figures are designed for display and light play. They feature articulation points typical of retro-style figures, allowing for various poses.

Maintenance and Care

Troubleshooting

IssuePossible CauseSolution
Figure joint is stiffNew figure, tight moldingGently work the joint back and forth. Do not force. Applying a small amount of warm water (not hot) to the joint area for a few seconds may help loosen it.
Accessory does not fit securelyMinor manufacturing variationEnsure the accessory is oriented correctly. If still loose, a tiny amount of non-permanent adhesive (e.g., museum putty) can be used for display purposes.
Figure falls over easilyImproper posing, uneven surfaceAdjust the figure's stance to balance its weight. Ensure it is placed on a flat, stable surface.

Specifications

Warranty and Support

For any questions regarding this product, including manufacturing defects or missing parts, please contact PlayMates customer support directly. Refer to the packaging or the official PlayMates website for current contact information.

Please retain your proof of purchase for any warranty claims.