1. Product Overview
The UNIWEIGH UF200-1 Digital Gram Scale is a compact and precise electronic mini scale designed for accurate measurements of small items. It features a high-precision sensor, an easy-to-read LCD display with orange backlight, and multiple weighing modes. Its portable design with a protective lid makes it suitable for various applications.

Figure 1: Overview of the UNIWEIGH UF200-1 Digital Gram Scale with key components labeled.

Figure 2: The compact dimensions of the scale (5.6" x 3.3" x 0.9") highlighting its portability.
2. Setup
- Battery Installation: Open the battery compartment located on the underside of the scale. Insert 2 AAA batteries, ensuring correct polarity. Close the compartment securely.
- Placement: Place the scale on a hard, flat, and stable surface to ensure accurate readings. Avoid placing it on soft or uneven surfaces.
- Protective Film Removal: Gently remove any protective film from the weighing platform before first use.
3. Operating Instructions
3.1 Basic Weighing
- Press the ON/OFF button to turn on the scale. Wait for the display to show "0.00" or "0.000".
- Place the item(s) to be weighed gently on the center of the stainless steel weighing platform.
- Read the weight displayed on the LCD screen.
3.2 Unit Conversion
The scale supports 6 different weighing units: grams (g), ounces (oz), grains (gn), carats (ct), pennyweights (dwt), and troy ounces (ozt).
- With the scale turned on and displaying "0.00", press the MODE button repeatedly to cycle through the available units.
- Select the desired unit for your measurement.

Figure 3: The scale's display illustrating the six available weighing units.
3.3 Tare Function
The Tare function allows you to subtract the weight of a container, ensuring only the weight of the contents is measured.
- Place an empty container on the weighing platform.
- Press the TARE button. The display will reset to "0.00" or "0.000".
- Add the items to be weighed into the container. The display will show the net weight of the items.

Figure 4: Step-by-step guide for using the Tare function to measure net weight.
3.4 Auto-Off Feature
To conserve battery life, the scale is equipped with an automatic shut-off function. If there is no activity for 180 seconds, the scale will automatically turn off.

Figure 5: The backlit LCD screen clearly displays readings and indicates the 180-second auto-off feature.
4. Calibration
For optimal accuracy, it is recommended to calibrate the scale regularly, especially after moving it or if you suspect inaccurate readings. A 50g calibration weight is included with your scale.
- Turn the scale ON and wait until the display shows "0.00" or "0.000".
- Press and hold the MODE button until "CAL" is displayed, then release the button.
- Press the MODE button again. The display will flash the required calibration weight (e.g., "50.00").
- Place the included 50g calibration weight gently on the center of the weighing platform.
- The display will show "PASS" and then return to normal weighing mode, indicating successful calibration.

Figure 6: The scale with the 50g calibration weight, demonstrating its use for various small items.
5. Maintenance
- Cleaning: Use a soft, damp cloth to clean the scale. Do not use abrasive cleaners or immerse the scale in water.
- Storage: Store the scale in a cool, dry place. Keep the protective lid closed to prevent dust and damage to the weighing platform.
- Handling: Handle the scale with care. Avoid dropping it or subjecting it to strong impacts, as this can affect its accuracy.
6. Troubleshooting
- "Lo" or Low Battery Indicator: Replace the batteries with new ones.
- "O-Ld" or Overload Indicator: Remove the item from the platform immediately. The weight exceeds the maximum capacity of 200g.
- Unstable Readings: Ensure the scale is on a stable, flat surface and away from vibrations or air currents. Recalibrate if necessary.
- Inaccurate Readings: Recalibrate the scale using the included 50g weight.
7. Specifications
- Capacity: 200g / 0.01g
- Units: g, oz, gn, ct, dwt, ozt
- Display: LCD with orange backlight
- Power: 2 x AAA batteries (included)
- Auto-Off: 180 seconds of inactivity
- Platform Material: Stainless Steel
- Product Dimensions: 5.6 x 3.3 x 0.9 inches
- Item Model Number: 609378946684
8. Official Product Video
Video 1: An official demonstration of the UNIWEIGH mini weight multifunction pocket scale, showcasing its features and ease of use.
9. Warranty and Support
UNIWEIGH is committed to providing high-quality digital scales. If you encounter any issues or are not completely satisfied with your purchase, please contact our customer service. We aim to respond within 24 hours and provide a satisfactory solution.
For further assistance, please refer to the contact information provided with your purchase or visit the official UNIWEIGH store on Amazon: UNIWEIGH Store