Product Overview
This document provides essential information for the installation, maintenance, and care of your Stihl OEM Air Filter Cover, part number 1137 140 1902. This cover is designed specifically for Stihl MS193T and MS193TC chainsaw models to protect the carburettor box and air filter from debris and environmental elements.

Image: Stihl OEM Air Filter Cover, part number 1137 140 1902. The orange plastic cover features a black central knob for securing it in place. A white label on the cover displays the part number and product description in multiple languages.
Setup and Installation
Proper installation of the air filter cover is crucial for the optimal performance and longevity of your chainsaw's engine components. Always ensure the chainsaw is turned off and cooled down before beginning any installation or maintenance procedures.
- Preparation: Ensure the area around the carburettor and air filter is clean and free of debris. If replacing an old cover, remove it carefully.
- Positioning: Align the new air filter cover (Part No. 1137 140 1902) over the air filter and carburettor box. Ensure all tabs or clips on the cover align with their corresponding slots on the chainsaw housing.
- Securing: Gently press the cover into place. For models with a central knob or screw, turn or tighten it clockwise until the cover is securely fastened. Do not overtighten, as this may damage the cover or housing.
- Verification: Lightly tug on the cover to ensure it is firmly attached and does not wobble. A properly installed cover will provide a tight seal, protecting the air filter from dust and debris.
Note: Refer to your specific Stihl chainsaw model's main instruction manual for detailed diagrams and safety precautions related to air filter and carburettor access.
Operating Considerations
The air filter cover functions as a protective barrier for the chainsaw's air intake system. While it does not directly participate in the engine's operation, its presence is vital for maintaining engine health.
- The cover prevents large particles, sawdust, and moisture from directly entering the air filter and carburettor.
- It helps maintain the integrity of the air filter, ensuring clean air supply to the engine.
- A damaged or missing cover can lead to premature wear of engine components due to contamination.
Maintenance
Regular inspection and cleaning of the air filter cover will extend its lifespan and ensure continued protection for your chainsaw.
- Cleaning: Periodically remove the cover and wipe it clean with a damp cloth to remove accumulated dust, sawdust, and grime. Avoid using harsh chemicals that may damage the plastic.
- Inspection: Check the cover for any signs of cracks, warping, or damage. Pay close attention to the sealing edges and attachment points. A damaged cover may not provide an adequate seal.
- Replacement: If the cover is cracked, broken, or no longer fits securely, it should be replaced immediately with a genuine Stihl OEM part to prevent engine damage.
Troubleshooting
Most issues related to the air filter cover are straightforward and involve physical damage or improper installation.
| Symptom | Possible Cause | Solution |
|---|---|---|
| Cover is loose or falls off easily. | Improper installation; damaged retaining clips/knob; warped cover. | Re-install ensuring proper alignment and secure fastening. Inspect clips/knob for damage. Replace cover if warped or damaged. |
| Excessive dust/debris inside air filter housing. | Cover not sealing properly; damaged cover. | Ensure cover is fully seated and secured. Inspect cover for cracks or deformities that prevent a tight seal. Replace if necessary. |
| Visible cracks or breaks on the cover. | Physical impact or material fatigue. | Replace the cover immediately to maintain protection. |
Specifications
| Part Number: | 1137 140 1902 |
| Compatible Models: | Stihl MS193T, MS193TC |
| Type: | OEM Air Filter Cover / Carburettor Box Cover |
| Manufacturer: | Stihl |
| Item Weight: | 1.13 ounces (approx. 32 grams) |
| Package Dimensions: | 4.33 x 3.54 x 1.65 inches (approx. 11 x 9 x 4.2 cm) |
Warranty and Support
As a genuine Stihl OEM part, this air filter cover is manufactured to Stihl's high-quality standards. For specific warranty information regarding genuine Stihl replacement parts, please refer to the warranty documentation provided with your original Stihl chainsaw or contact an authorized Stihl dealer.
For technical support or assistance with part identification, please contact your local authorized Stihl service center or visit the official Stihl website. Always use genuine Stihl parts to ensure compatibility and maintain the performance and safety of your equipment.
Disclaimer: This manual provides general guidance. Always follow the safety instructions and procedures outlined in your chainsaw's primary operator's manual.