ABKO EC10 Active Noise Cancelling True Wireless Earbuds User Manual

Introduction

The ABKO EC10 Active Noise Cancelling True Wireless Earbuds are designed to provide an immersive audio experience with advanced noise cancellation and clear communication features. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your earbuds.

What's in the Box

• 1 x EC10 Earbud Set (Left and Right)
• 1 x USB-C Type Charging Cable
• 4 x Ear Tips (various sizes)
• 1 x User Manual (this document)

Image: The ABKO EC10 earbuds shown inside their charging case, with the USB-C charging cable and extra ear tips.

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case. The case supports both USB-C wired charging and wireless charging.

• Wired Charging: Connect the provided USB-C cable to the charging port on the case and to a USB power source.
• Wireless Charging: Place the charging case on a compatible wireless charging pad.

The charging time for both the cradle and earbuds is approximately 1.5 hours.

Image: The ABKO EC10 charging case placed on a wireless charging pad, illustrating its wireless charging capability.

2. Pairing with Your Device

The EC10 earbuds feature fast auto-pairing for convenience.

1. Ensure your device's Bluetooth is turned on.
2. Open the charging case. The earbuds will automatically enter pairing mode.
3. On your device, search for Bluetooth devices and select "ABKO EC10" from the list.
4. Once connected, you will hear an audible confirmation.

The earbuds use Bluetooth Version 5.0 and have an operation distance of up to 10 meters.

Video: An official product video demonstrating the features and usage of the ABKO Wireless ANC Earbuds EC10, including pairing and various modes.

Operating the Earbuds

Active Noise Cancellation (ANC)

The EC10 earbuds feature Active Noise Cancellation (ANC) technology, which analyzes surrounding noise and generates a "counter-noise" to cancel it, reducing ambient noise by up to 28 dB. They also offer Passive Noise Cancelling through ergonomically designed ear tips for a secure fit.

Image: Visual representation of the Active Noise Cancellation feature, showing how external noise is detected and counter-noise is generated to cancel it.

Transparency Mode

Activate Transparency Mode by touching the button on the left earbud for 1.5 seconds. This mode allows you to hear your surroundings without removing the earbuds, which is useful for interacting with people or being aware of traffic.

Image: Two individuals interacting while wearing the earbuds, illustrating the use of Transparency Mode to hear ambient sounds.

Clear Voice Calls

Each earbud is equipped with MEMS dual microphones. One microphone senses and cancels ambient noise, while the other picks up and isolates your voice, ensuring clear calls even in noisy environments.

Image: A person on a phone call with the earbuds, showing the microphone noise cancelling technology at work to deliver clear voice.

Audio Quality

The EC10 earbuds feature a 10mm large dynamic driver for deep bass and support AAC/SBC codecs for high-quality audio decoding, providing well-balanced sound for all types of music.

Image: An exploded view of the earbud highlighting the 10mm large dynamic driver, emphasizing its role in delivering clear sound and rich bass.

Controls

The earbuds feature touch controls for media playback and call management. Refer to the quick start guide included in the box for specific touch commands.

Maintenance

Cleaning

Regularly clean your earbuds and charging case to maintain optimal performance and hygiene. Use a soft, dry, lint-free cloth. For ear tips, remove them and clean with mild soap and water, then dry thoroughly before reattaching.

Water Resistance (IPX5)

The EC10 earbuds are IPX5 waterproof, meaning they are resistant to sweat and light splashes of water. They are not designed for submersion in water. Ensure earbuds are dry before placing them back in the charging case.

Image: A person exercising with the earbuds, illustrating their resistance to rain and sweat due to IPX5 waterproof rating.

Troubleshooting

• Earbuds not pairing/only one earbud working:

  Ensure both earbuds are charged. Place both earbuds back into the charging case, close the lid, wait a few seconds, then open the lid again to re-initiate pairing. If issues persist, try resetting the earbuds (refer to the quick start guide for specific reset instructions).

• No sound:

  Check the volume level on your connected device. Ensure the earbuds are properly paired and connected. Try disconnecting and re-pairing the earbuds.

• Charging issues:

  Ensure the charging cable is securely connected and the power source is active. For wireless charging, ensure the case is correctly positioned on the charging pad. Clean the charging contacts on both the earbuds and the case.

• Poor sound quality:

  Ensure the ear tips provide a good seal in your ear. Try different sized ear tips. Clean any debris from the earbud speakers. Move closer to your connected device to avoid interference.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official ABKO website. Keep your proof of purchase for warranty claims.

Manufacturer: ABKO