Tecnolite 50LHBLEDT65MV200

Download PDF
Contents

Tecnolite 50W LED Bulb Instruction Manual

Model: 50LHBLEDT65MV200

1. Introduction

Thank you for choosing the Tecnolite 50W LED Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.

2. Safety Information

  • Electrical Safety: Always turn off the power supply at the main circuit breaker before installing or replacing the bulb.
  • Proper Installation: Ensure the bulb is securely screwed into a compatible E27 socket. Do not overtighten.
  • Indoor Use: This bulb is designed for indoor use in dry locations unless otherwise specified.
  • Voltage Compatibility: Verify that the voltage of your electrical system matches the bulb's requirements.
  • Heat: Although LED bulbs generate less heat than traditional incandescent bulbs, they can still become warm. Avoid touching the bulb immediately after use.
  • Disposal: Dispose of used bulbs according to local regulations for electronic waste.

3. Product Overview

The Tecnolite 50W LED Bulb provides high-intensity, cool white illumination suitable for general and task lighting. Its omnidirectional light distribution ensures broad coverage.

Tecnolite 50W LED Bulb in its packaging

Image 3.1: Tecnolite 50W LED Bulb in its retail packaging, highlighting key features like 50W LED, 4500 lumens, and 14 years of life.

Front view of Tecnolite 50W LED Bulb

Image 3.2: Front view of the Tecnolite 50W LED Bulb, showcasing its rounded shape and E27 base.

Key Features:

  • Power: 50W LED
  • Luminous Flux: 4500 Lumens
  • Color Temperature: 6500K (Cool White / Daylight)
  • Base Type: E27
  • Beam Angle: 200° Omnidirectional
  • Lifespan: Approximately 15,000 hours
  • Dimensions: 224mm (Height) x 138mm (Diameter)
Side view of Tecnolite 50W LED Bulb

Image 3.3: Side view of the Tecnolite 50W LED Bulb, illustrating its overall form factor and E27 screw base.

4. Setup

Follow these steps to install your Tecnolite 50W LED Bulb:

  1. Turn off Power: Locate the light fixture's power switch and turn it off. For added safety, turn off the power at the main circuit breaker.
  2. Remove Old Bulb (if applicable): Allow the old bulb to cool completely before carefully unscrewing it counter-clockwise from the socket.
  3. Install New Bulb: Gently screw the Tecnolite 50W LED Bulb clockwise into the E27 socket until it is snug. Do not apply excessive force.
  4. Restore Power: Turn the power back on at the main circuit breaker, then flip the light switch to the 'ON' position.

5. Operating Instructions

Operating the Tecnolite 50W LED Bulb is straightforward:

  • To Turn On: Flip the wall switch connected to the light fixture to the 'ON' position.
  • To Turn Off: Flip the wall switch to the 'OFF' position.

This bulb is not designed for use with dimmer switches unless explicitly stated on the packaging or product specifications.

6. Maintenance

The Tecnolite 50W LED Bulb requires minimal maintenance:

  • Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the setup instructions in Section 4.

7. Troubleshooting

If your Tecnolite 50W LED Bulb is not functioning correctly, consider the following:

  • Bulb Does Not Light Up:
    • Check if the power switch is in the 'ON' position.
    • Verify that the main circuit breaker for the fixture is not tripped.
    • Ensure the bulb is screwed in securely into the socket.
    • Test the socket with another working bulb to confirm the fixture is operational.
  • Flickering:
    • Ensure the bulb is fully tightened in the socket.
    • If connected to a dimmer, confirm the bulb is compatible with dimmers. This model is generally not dimmer-compatible.
    • Check for loose wiring in the fixture (consult a qualified electrician if unsure).

If problems persist, contact Tecnolite customer support.

8. Specifications

Tecnolite 50W LED Bulb packaging with detailed specifications

Image 8.1: Packaging detail showing the technical specifications of the Tecnolite 50W LED Bulb.

SpecificationDetail
BrandTecnolite
ManufacturerTECNOLITE
Model50LHBLEDT65MV200
Bulb TypeLED
Wattage50 Watts
Luminous Flux4500 Lumens
Color Temperature6500 Kelvin (Cool White / Daylight)
Base TypeE27
Beam Angle200°
Average Lifespan15,000 Hours
Energy Efficiency Label (EU)90 lumens per watt
MaterialCopper
ShapeRounded / Pear
Assembled Unit Height8.82 inches (224 mm)
Assembled Unit Length5.43 inches (138 mm)
Assembled Unit Width5.43 inches (138 mm)
Specific UsesTask lighting, General lighting
Special FeaturesHigh luminosity and wide beam angle
Power SourceElectric plug
Batteries RequiredNo

9. Warranty Information

The Tecnolite 50W LED Bulb comes with a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the product packaging or contact Tecnolite customer support.

10. Support Information

For further assistance, technical support, or warranty inquiries, please contact Tecnolite directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.