Yaheetech Adjustable PU Leather Swivel Bar Stools (Set of 2) - User Manual

1. Important Safety Information

⚠ WARNING: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.

• Read all instructions carefully before assembly and use.
• Keep children away during assembly. Small parts may be a choking hazard.
• Ensure all components are securely fastened before use.
• Do not exceed the maximum weight capacity of 330 pounds.
• Use on a flat, stable surface to prevent tipping.
• Avoid standing on the stool.

2. Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact Yaheetech customer support.

• 2 x Seat Cushions with Backrest
• 2 x Gas Lifts
• 2 x Footrests
• 2 x Bases
• Hardware Pack (screws, washers, Allen wrench)
• Assembly Instructions Manual

Image: Exploded view of bar stool components.

3. Assembly Instructions

Assembly is straightforward and typically takes less than 10 minutes per chair. Follow these steps carefully:

1. Attach the Seat to the Gas Lift: Align the mounting holes on the bottom of the seat cushion with the top of the gas lift mechanism. Secure with the provided screws and Allen wrench.
2. Insert the Gas Lift into the Base: Remove the protective cap from the top of the gas lift. Insert the narrow end of the gas lift into the center hole of the stool base. Ensure it is seated firmly.
3. Attach the Footrest: Slide the footrest ring over the gas lift and secure it in place according to the instructions, typically by tightening a screw or bolt.
4. Test Stability: Once assembled, gently sit on the stool to ensure all connections are secure and the stool is stable.

Image: Various views of the assembled bar stool.

Image: Detailed view of the gas lift, base, and footrest components.

4. Operating Instructions

4.1. Adjusting Seat Height

The bar stool features an adjustable height mechanism. To adjust the seat height:

• To raise the seat: While standing, pull the lever located under the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
• To lower the seat: While seated, pull the lever located under the seat upwards. The seat will lower under your weight. Release the lever when the desired height is reached.

The adjustable seat height ranges from approximately 21.7 inches to 29.9 inches, suitable for counter tables and bar tables between 32-40 inches high.

4.2. Swivel Function

The seat is designed to rotate 360 degrees, allowing for easy movement and interaction without needing to reposition the entire stool.

5. Maintenance and Care

To ensure the longevity and appearance of your Yaheetech bar stools, follow these maintenance guidelines:

• Cleaning: Wipe the PU leather surface with a damp cloth. For stubborn stains, use a mild soap solution and then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Frame Care: The electroplated metal base and frame can be cleaned with a soft, dry cloth. Avoid prolonged exposure to moisture to prevent tarnishing.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Weight Capacity: Do not exceed the maximum weight capacity of 330 pounds to prevent damage and ensure safety.

Image: Close-up of the PU leather and foam cushion, emphasizing comfort and ease of cleaning.

6. Troubleshooting

If you encounter any issues with your bar stools, refer to the following common problems and solutions:

• Stool feels wobbly:
  • Ensure all assembly screws are fully tightened.
  • Verify the stool is on a flat, even surface.
• Height adjustment not working:
  • Check if the gas lift protective cap has been removed.
  • Ensure the lever mechanism is not obstructed.
  • If the gas lift is faulty, contact customer support for a replacement.
• Squeaking noise:
  • Apply a small amount of silicone lubricant to the swivel mechanism or gas lift connection points.
  • Ensure all parts are securely fastened.

For issues not covered here, please contact Yaheetech customer support.

7. Product Specifications

Image: Detailed product dimensions.

8. Warranty and Support

Yaheetech products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official Yaheetech website. If you require assistance with assembly, parts, or have any questions, please contact Yaheetech customer support directly.

Contact Information: Please refer to the contact details provided on the Yaheetech official website or your purchase receipt.