1. Introduction
Thank you for choosing the INSPIRE VOLGA LED Damp Room Lamp. This product is designed to provide powerful and efficient lighting for various environments, including damp rooms, garages, workshops, and outdoor areas. Its robust IP65 rating ensures protection against water and dust, making it suitable for demanding conditions.
This manual provides essential information for the safe and correct installation, operation, and maintenance of your LED lamp. Please read it thoroughly before installation and retain it for future reference.
Figure 1: INSPIRE VOLGA LED Damp Room Lamp
This image shows the INSPIRE VOLGA LED Damp Room Lamp, a long, white, rectangular light fixture designed for robust performance in challenging environments.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Always disconnect the power supply before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
- Ensure the mounting surface is strong enough to support the weight of the lamp.
- Do not modify the lamp in any way. Unauthorized modifications may void the warranty and pose safety risks.
- Keep packaging materials out of reach of children.
- This product is designed for specific environments (IP65 rated). Do not use it in conditions beyond its specified protection level.
- Avoid direct eye exposure to the LED light source when the lamp is on.
3. Package Contents
Verify that all components are present and undamaged upon unpacking:
- INSPIRE VOLGA LED Damp Room Lamp
- Instruction Manual
- Mounting Hardware (screws, wall plugs)
Figure 2: Included Components
This image illustrates the contents of the package, including the LED lamp, an instruction manual, and a bag containing mounting screws and wall plugs.
4. Specifications
| Feature | Value |
|---|---|
| Model Number | FL7560Y-PCB |
| Manufacturer Reference | 3276000703662 |
| Power Consumption | 48W (equivalent to 347W traditional incandescent) |
| Luminous Flux | 6400 Lumens |
| Color Temperature | 4000K (Cool White) |
| Ingress Protection (IP) Rating | IP65 (Water and dust resistant) |
| Product Dimensions (L x W x H) | 144 x 8 x 6 cm |
| Weight | 1.08 kg |
| Lifespan | 30,000 hours |
| On/Off Cycles | >15,000 |
| Mounting Type | Ceiling-mounted |
| Energy Source | Wired electrical connection |
| Energy Efficiency Class | D |
Figure 3: Key Product Features (48W, 6400 Lumens, 30,000h lifespan, >15,000 ON/OFF cycles, IP65 rating)
This image highlights the main technical specifications of the lamp, including its power consumption (48W), light output (6400 lumens), estimated lifespan (30,000 hours), number of on/off cycles (>15,000), and IP65 protection rating.
Figure 4: Technical Drawing with Dimensions
This technical drawing provides detailed dimensions of the lamp, including its overall length of 144 cm, width of 8.2 cm, and height of 6.4 cm, along with mounting point spacing.
Figure 5: Energy Efficiency Label
This label indicates the energy efficiency class of the lamp, which is rated 'D', and its energy consumption of 48 kWh/1000h. A QR code is also present for more information.
For more detailed product information, please refer to the EPREL database: https://eprel.ec.europa.eu/qr/940450
5. Installation
The INSPIRE VOLGA LED lamp is designed for ceiling mounting and requires a wired electrical connection. Follow these steps carefully:
- Safety First: Before starting any installation work, ensure the main power supply to the installation area is switched off at the circuit breaker.
- Positioning: Choose a suitable location on the ceiling for the lamp, considering the light distribution and accessibility for wiring.
- Marking: Use the lamp or its mounting brackets as a template to mark the drilling points on the ceiling. Refer to the dimensions diagram for accurate spacing.
- Drilling: Drill holes at the marked positions using an appropriate drill bit for your ceiling material. Insert the provided wall plugs into the drilled holes.
- Mounting Brackets: Secure the mounting brackets (if separate) to the ceiling using the provided screws.
- Electrical Connection: Carefully connect the electrical wires from your power supply to the lamp's terminals. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. If in doubt, consult a qualified electrician.
- Secure the Lamp: Attach the LED lamp to the mounted brackets, ensuring it is securely fastened.
- Restore Power: Once the lamp is securely installed and wired, restore power at the circuit breaker and test the lamp.
Figure 6: INSPIRE VOLGA LED Lamp installed in a garage, powered off.
This image shows the LED lamp mounted on the ceiling of a garage, demonstrating its placement and appearance when not illuminated.
Figure 7: INSPIRE VOLGA LED Lamp installed in a garage, powered on.
This image displays the LED lamp mounted on the ceiling of a garage, fully illuminated and providing bright, cool white light to the area.
6. Operating Instructions
Operating the INSPIRE VOLGA LED lamp is straightforward:
- Once properly installed and connected to the main power supply, the lamp can be switched on and off using a standard wall switch connected to its circuit.
- The lamp provides immediate full brightness upon activation.
7. Maintenance
The INSPIRE VOLGA LED lamp requires minimal maintenance:
- Cleaning: Ensure the power supply is disconnected before cleaning. Wipe the lamp's exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- Inspection: Periodically check the lamp and its mounting for any signs of damage or loose connections.
- No User-Serviceable Parts: The LED light source is integrated and not replaceable by the user. Do not attempt to open or repair the lamp.
8. Troubleshooting
If you encounter issues with your INSPIRE VOLGA LED lamp, refer to the following common problems and solutions:
- Lamp does not turn on:
- Check if the main power supply to the lamp is switched on.
- Verify that the wall switch controlling the lamp is in the 'ON' position.
- Inspect the electrical wiring connections for any looseness or disconnections (ensure power is off before inspection).
- If the issue persists, consult a qualified electrician.
- Reduced light output or flickering:
- Ensure the lamp's surface is clean and free from dust or debris.
- Check for stable power supply. Fluctuations in voltage can affect LED performance.
- If flickering occurs immediately after installation, re-check wiring connections.
For problems not listed here or if troubleshooting steps do not resolve the issue, please contact customer support.
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Inspire products are designed for quality and durability.
If you require technical assistance or have questions regarding your INSPIRE VOLGA LED lamp, please contact Inspire customer service or your authorized dealer. Please have your model number (FL7560Y-PCB) and purchase details ready when contacting support.
You can find more information about Inspire products and support on their official website or through your local retailer.
10. Environmental Protection and Disposal
This product contains electronic components and should not be disposed of with household waste. Please dispose of it at designated collection points for electrical and electronic equipment (WEEE) in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.
