1. Introduction
The TUREWELL Water Dental Flosser is an advanced oral irrigator designed to provide deep cleaning for teeth and gums, promoting overall oral health. It is an effective tool for removing food debris, plaque, and massaging gums, especially beneficial for individuals with braces, implants, or crowns. This manual provides detailed instructions for the safe and efficient use of your new dental flosser.
Image: The TUREWELL Oral Irrigator, a comprehensive oral health solution for the entire family.
2. Product Overview & Components
Your TUREWELL Water Dental Flosser comes with a main unit and a variety of specialized jet tips to cater to different oral care needs.
Image: The TUREWELL Water Dental Flosser and its complete set of 8 interchangeable jet tips.
Key Components:
- Main Unit: Features a 600ML large water tank, 10-speed pressure control system, and anti-slip suckers for stability.
- Handle: Equipped with a water control button (ON/OFF) and a nozzle replacement button.
- Flexible Hose: Provides extended reach during use.
- Nozzles: Rotates 360° for comprehensive cleaning.
Included Jet Tips:
Image: A visual guide to the 7 distinct nozzles and their specific functions for targeted oral care.
- 3 Ordinary High-Pressure Tips: For general daily cleaning.
- 1 Orthodontic Tip: Specifically designed for cleaning around braces and orthodontic appliances.
- 1 Tongue Cleaner Tip: Helps remove bacteria and freshen breath.
- 1 Periodontal Tip: For gentle cleaning of gum pockets and sensitive areas.
- 1 Tooth Stains Tip: Aids in reducing surface stains.
- 1 Toothbrush Tip: Combines brushing and water flossing action.
3. Setup
Follow these steps to set up your TUREWELL Water Dental Flosser for first use:
- Fill the Water Tank: Open the lid of the 600ML water tank. Fill the tank with warm water. You may also add mouthwash (cold or excessively hot water can cause discomfort). Close the lid securely to prevent spills.
- Attach a Jet Tip: Select the desired jet tip. Insert the tip into the hole on the handle until it clicks into place. Ensure it is firmly seated.
- Plug In: Connect the power cord to a suitable electrical outlet (voltage range: 100V-240V).
Image: Demonstrating the process of filling the 600ML high-volume water tank.
Image: Instructions for installing and rotating the jet tip on the flosser handle.
4. Operating Instructions
Using your TUREWELL Water Dental Flosser is simple and effective:
- Adjust Water Pressure: Rotate the gear knob on the main unit to select your desired water pressure level. There are 10 adjustable settings (30-125 PSI).
- Levels 1-4: Recommended for children, beginners, or those with sensitive teeth.
- Levels 5-6: Suitable for most users.
- Levels 7-10: For adults and experienced users requiring higher pressure.
- Position the Tip: Lean over the sink. Aim the jet tip at your teeth, gumline, or tongue at a 90-degree angle. Slightly close your lips to prevent water from spraying out, allowing water to flow into the sink from the corner of your mouth.
- Start Flossing: Press the ON button on the handle to start the water flow. Guide the tip along your gumline and between your teeth.
- Stop Flossing: When finished, press the OFF button on the handle.
Image: The 10 adjustable water pressure settings ranging from 30 to 125 PSI.
Image: Simple, easy-to-follow steps for using the TUREWELL Water Dental Flosser.
5. Maintenance
Proper maintenance ensures the longevity and hygiene of your dental flosser:
- Empty and Dry Tank: After each use, empty any remaining water from the tank and allow it to air dry to prevent mold and mildew.
- Clean the Unit: Wipe the exterior of the unit with a soft, damp cloth. Do not immerse the main unit in water.
- Replace Nozzles: For optimal hygiene and performance, it is recommended to change new nozzles every 3 months.
- Check Rubber Plug: Periodically check the rubber plug in the tank to ensure it is correctly positioned to prevent leaks and ensure proper water flow.
6. Troubleshooting
If you encounter any issues with your TUREWELL Water Dental Flosser, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water coming out. | Rubber plug in the tank is not in the correct direction. | Check and adjust the rubber plug in the water tank to ensure it is properly seated. |
| Unit remains in standby mode after use. | Only the water stop button on the handle was turned off. | When you stop using the flosser, turn the gear knob on the main unit to OFF and also turn off the stop button on the handle simultaneously. This ensures the engine is fully powered down and prolongs product life. |
| Water leakage from the tank. | Tank lid not closed properly or rubber plug issue. | Ensure the tank lid is securely closed. Verify the rubber plug at the bottom of the tank is correctly inserted and not damaged. |
7. Specifications
- Product Dimensions: 6.1 x 5.91 x 8.66 inches
- Product Weight: 1.99 Pounds
- Water Tank Capacity: 600ML
- Water Pulse Rate: 1250-1700 times/min
- Water Pressure Range: 30-125 PSI (10 adjustable levels)
- Power Source: Corded Electric
- Voltage Range: 100V-240V
- Special Features: Multiple Pressure Settings, Multiple Tips, 360° Rotating Nozzle, Anti-leakage Design
8. Safety Information
Please read and adhere to the following safety guidelines to ensure safe operation and prevent injury:
- Keep the water aim away from the throat and eyes.
- Close your mouth while using the flosser to avoid water spraying.
- Do not mix mouthwash directly into the water reservoir unless specifically instructed by the mouthwash manufacturer for use in water flossers.
- Ensure the unit is unplugged before cleaning or performing any maintenance.
- Do not operate the unit if the power cord or plug is damaged.
- Keep out of reach of children.
9. Warranty & Support
For warranty information or technical support, please refer to the product packaging or contact TUREWELL customer service directly. Details can typically be found on the manufacturer's official website or through your purchase platform.
