Spigen Screen Guard Protector User Manual

1. Introduction

This manual provides detailed instructions for the installation, use, and maintenance of your Spigen Screen Guard Protector. This product is designed to offer edge-to-edge full screen coverage and protection for your Xiaomi Mi 11, Mi 11 Pro, or Mi 11 Ultra smartphone.

Key features include a flexible film for curved screens, case compatibility, crystal clear display, and responsive touch sensitivity.

2. Compatibility Check

Before installation, ensure your device is compatible with this screen protector. This product is specifically designed for the Xiaomi Mi 11, Mi 11 Pro, and Mi 11 Ultra.

Figure 2.1: Compatibility check for Xiaomi Mi 11 and Mi 11 Ultra.

This image displays two smartphones, a Xiaomi Mi 11 and a Xiaomi Mi 11 Ultra, with checkmarks indicating compatibility with the screen protector. It visually confirms the supported models.

3. Package Contents

Verify that your package contains the following items:

• Screen Protector (2 units)
• Wet Wipe
• Dry Wipe
• Micro Fiber Cloth

4. Installation Instructions (Setup)

For optimal results, please watch the official installation video by scanning the QR code provided on the product packaging. The screen protector uses a wet installation method for easy and quick application.

Preparation:

1. Ensure you are in a dust-free environment.
2. Wash your hands thoroughly to remove any oils or dirt.
3. Turn off your smartphone.

Application Steps:

1. Clean the Screen: Use the provided wet wipe to thoroughly clean your phone's screen. Follow with the dry wipe to remove moisture, and then use the micro fiber cloth to eliminate any remaining dust or smudges.
2. Align the Protector: Carefully peel off the first protective layer from the screen protector. Align the protector with your phone's screen, paying close attention to the cutouts for the camera and sensors.
3. Wet Application: (If applicable, as per video instructions) Lightly spray the adhesive side of the protector and your phone screen with the provided solution or water. This allows for easier positioning.
4. Apply and Squeegee: Gently lay the screen protector onto the screen. Use a squeegee (not included, but often part of the kit or a credit card wrapped in the micro fiber cloth can be used) to push out any air bubbles and excess liquid from the center outwards.
5. Secure Edges: For curved screens, carefully press down the edges to ensure full adhesion.
6. Final Curing: Small bubbles or marks may be visible immediately after installation. These typically disappear within 24-48 hours as the solution dries and the adhesive fully cures. Avoid touching the edges during this period.

Figure 4.1: Wet installation method for flexible film screen protector.

This image illustrates the wet installation process, showing hands spraying a liquid onto a flexible screen protector before it is applied to a smartphone screen. This method aids in precise positioning and bubble-free application.

5. Operating and Usage

Once properly installed, your Spigen Screen Guard Protector will function seamlessly with your device.

• Daily Protection: The flexible film protects your screen from daily scratches, scuffs, and minor impacts.
• Crystal Clear Display: The protector is designed to be crystal clear, preserving the original brightness and visual quality of your phone's display.
• Responsive Touch: It maintains the original touch sensitivity of your screen, ensuring undisturbed and quick touch response.
• Case Friendly: The design ensures compatibility with most Spigen cases, allowing you to use a protective case without interference.

Figure 5.1: Screen protector providing daily scratch protection.

This image highlights the daily protection feature, showing a smartphone screen that is safeguarded against scratches by the applied screen protector.

Figure 5.2: Undisturbed and quick touch response with the screen protector.

This image shows a hand interacting with a smartphone screen, emphasizing that the screen protector allows for undisturbed and quick touch response, maintaining the phone's original functionality.

Figure 5.3: Crystal clear display maintained by the screen protector.

This image demonstrates the crystal clear quality of the screen protector, showing a smartphone displaying a vibrant image with untainted clarity.

Figure 5.4: Flawless fit with Spigen cases.

This close-up image illustrates the case compatibility of the screen protector, showing a smartphone with both the screen protector and a Spigen case installed, demonstrating a flawless fit without interference.

6. Maintenance

To ensure the longevity and clarity of your screen protector:

• Clean the screen protector regularly using a soft, lint-free cloth.
• For stubborn smudges, lightly dampen the cloth with water.
• Avoid using harsh chemicals, abrasive cleaners, or alcohol-based solutions, as these can damage the protector's surface.
• Do not use sharp objects to clean or remove debris from the screen protector.

7. Troubleshooting

If you encounter issues during or after installation, refer to the following common solutions:

• Bubbles After Installation: Small bubbles are common immediately after wet installation and usually disappear within 24-48 hours as the liquid evaporates. For larger bubbles, gently push them towards the nearest edge using a soft cloth or squeegee.
• Edges Not Sticking / Peeling:
  • Ensure the screen was thoroughly cleaned and free of dust, oils, or debris before application.
  • During installation, apply firm and consistent pressure to the curved edges.
  • Allow the screen protector sufficient time (24-48 hours) to fully adhere and cure without disturbance.
  • If the issue persists, re-application with careful attention to edge pressure during the curing phase may be necessary.
• Dust Under Protector: This typically occurs during installation. If dust particles are trapped, it is often difficult to remove them without damaging the protector or introducing more dust. Prevention through a clean environment is key.

8. Specifications

Note: While some product specifications may mention "Tempered Glass" and "9H Hardness", the product's description of "flexible film" and "wet installation" for "Edge to Edge Protection" on curved screens indicates it is a film protector. The specifications above reflect the characteristics of a flexible film screen protector.

9. Warranty Information

Specific warranty details for this product are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the official Spigen website or contact Spigen customer support directly.

10. Customer Support

If you require further assistance or have questions not covered in this manual, please contact Spigen customer support through their official website or the contact information provided on your product packaging.

Spigen India Contact: Spigen India Private Limited / NO.295 - 296, Ecotech-1, Extension, Greater Noida, Uttar Pradesh 201310, India

Manufacturer: Spigen Korea Co., Ltd. / SpigenHQ, 446, Bongeunsa-ro, Gangnam-gu, Seoul, Rep. of Korea