1. Introduction
The Electro-Voice Evolve 50M is a portable column loudspeaker system designed for professional audio performance in a compact and reliable package. It features an integrated 8-channel digital mixer, DSP, effects, and QuickSmart Link technology for expanded setups. This manual provides essential information for the proper setup, operation, and maintenance of your Evolve 50M system.
2. Package Contents
Your Electro-Voice Evolve 50M system includes the following components:
- 1x 12-inch Subwoofer with integrated amplifier and mixer
- 1x Full-range Column Array (with eight 3.5-inch neodymium drivers)
- 1x Symmetrical Aluminum Pole (with internal wiring)
- 1x Array/Pole Carry Case
- 1x Power Cable
3. Setup
Follow these steps to assemble your Evolve 50M system:
- Position the Subwoofer: Place the 12-inch subwoofer on a stable, flat surface. Ensure adequate ventilation around the unit.
- Insert the Pole: Carefully insert the symmetrical aluminum pole into the designated port on top of the subwoofer. The pole features magnetically assisted latching for secure connection.
- Attach the Column Array: Mount the full-range column array onto the top of the aluminum pole. Ensure it is securely seated and latched.
- Connect Power: Plug the power cable into the subwoofer's power input and then into a suitable electrical outlet.
4. Operating Instructions
The Evolve 50M features a comprehensive 8-channel digital mixer and QuickSmart DSP for versatile control.
4.1 Mixer and Inputs
The integrated mixer provides multiple input options:
- 4x XLR/TRS combo mic/line inputs
- 1x XLR/TRS combo stereo line input
- 1x RCA input
- 1x 3.5 mm stereo input
- 1x Hi-Z instrument input
Each input channel features professional-grade preamps and mix functions. Use the master volume control to optimize gain structure.
4.2 QuickSmart DSP and Effects
The QuickSmart DSP control panel allows navigation and adjustment of all audio, effects, and mix functions via an LCD with single-knob control or the QuickSmart Mobile app.
- Presets: Four factory presets are available: Music, Live, Speech, and Club.
- EQ: Three-band system EQ (low, mid, high) and a seven-band graphic EQ (in Mixer mode).
- User Presets: Five user-programmable presets to store and recall settings.
- Effects: 30 presets, including chorus, delay, flange, and reverb, via two FX channels.
- Phantom Power: Available for condenser microphones.
- Limiter Status: Visual monitoring of limiter status.
4.3 Bluetooth Streaming
The Evolve 50M supports high-resolution, low-latency Bluetooth streaming for music playback or accompaniment. Pair your mobile device via the QuickSmart Mobile app (available on Apple App Store and Google Play).
4.4 QuickSmart Link
For larger setups, two EVOLVE 50M systems can be linked together via an Ethernet cable for an uncompressed digital audio/control connection. Both systems can then be paired to a single mobile device via the QuickSmart Mobile app for full mix control.
5. Maintenance
To ensure the longevity and optimal performance of your Evolve 50M system, follow these maintenance guidelines:
- Cleaning: Regularly wipe down the exterior surfaces with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, store the system in its provided array/pole carry case in a dry, temperature-controlled environment.
- Ventilation: Ensure the subwoofer's vents are clear of obstructions to prevent overheating.
- Cable Care: Inspect all cables regularly for damage. Replace any frayed or damaged cables immediately.
6. Troubleshooting
If you encounter issues with your Evolve 50M system, try the following steps:
- No Power: Check that the power cable is securely connected to both the subwoofer and the electrical outlet. Verify the outlet is functional.
- No Sound: Ensure the system is powered on and all input cables are correctly connected. Check input levels and master volume. Verify that no channels are muted.
- Distorted Sound: Reduce input levels and master volume. Check for damaged cables or improper connections.
- Bluetooth Connection Issues: Ensure the system is in Bluetooth pairing mode and your mobile device's Bluetooth is enabled. Try restarting both devices.
For persistent issues, contact customer support.
7. Specifications
| Model Number | EVOLVE50MBK |
| Power Output | 1000W |
| Subwoofer Size | 12 inches |
| Column Array Drivers | 8x 3.5-inch Neodymium |
| Coverage (Horizontal x Vertical) | 120° x 40° (asymmetrical) |
| Number of Channels | 8 (integrated digital mixer) |
| Audio Inputs | 4x XLR/TRS Combo, 1x XLR/TRS Stereo Combo, 1x RCA, 1x 3.5mm Stereo, 1x Hi-Z |
| Connectivity Technology | AUX, Bluetooth, Ethernet, RCA, TRS, XLR |
| DSP Functions | 4 Presets, 3-band System EQ, 7-band Graphic EQ, 5 User Presets, Phantom Power, Limiter |
| Effects | 30 Presets (Chorus, Delay, Flange, Reverb) |
| Material | Aluminum (pole), Composite (array), Wood (subwoofer) |
| Color | Black |
| Product Dimensions | 9.1 x 9.1 x 9.1 inches (subwoofer) |
| Item Weight | 17.46 pounds (7.94 Kilograms) |
8. Warranty and Support
Electro-Voice offers protection plans for your Evolve 50M system. Please refer to your purchase documentation for specific warranty details.
- Protection Plans: Options include a 3-Year Protection Plan and Complete Protect.
- Customer Support: For technical assistance or service inquiries, please refer to the contact information provided with your product or visit the official Electro-Voice website.
