Introduction
This manual provides comprehensive instructions for the SHARP Digital Alarm with AccuSet. This automatic smart clock is designed for ease of use, eliminating the need for manual time adjustments. Its clear, bright LED display and intuitive controls make it an ideal timekeeping solution for any room.
The SHARP Digital Alarm Clock seamlessly integrates into your bedroom decor.
Product Features
- AccuSet Automatic Time Set: Pre-programmed time for immediate use.
- Quick Daylight Savings Time (DST) Adjustment: Simple switch for time changes.
- High/Low Dimmer Control: Adjustable display brightness for comfort.
- Back up Battery: Pre-installed CR2032 battery maintains time settings during power outages.
- Time Zone Selection: Easily select your local time zone.
Overview of the SHARP Digital Alarm Clock's primary features.
Setup
- Unpack the Clock: Carefully remove the clock from its packaging.
- Select Time Zone: Locate the time zone switch on the bottom of the clock. Select your appropriate time zone (EST, CST, MST, PST) before plugging in the unit.
- Plug In: Connect the power cord to an approved electrical outlet. The clock will automatically set to the correct time based on your time zone selection.
- Daylight Saving Time (DST) Setting: If applicable, slide the DST switch on the bottom of the clock to 'ON' to add one hour (+1 hr.) for Daylight Saving Time, or 'OFF' to subtract one hour (-1 hr.) for Standard Time.
The main unit of the SHARP Digital Alarm Clock, ready for setup.
Operating Instructions
Setting the Alarm
The alarm function is controlled by buttons located on the top of the clock.
- Set Alarm Time: Press and hold the 'ALARM' button. While holding, press the 'HOUR' button to adjust the alarm hour and the 'MINUTE' button to adjust the alarm minute. Release the 'ALARM' button when finished.
- Activate/Deactivate Alarm: Press the 'ALARM ON/OFF' button to toggle the alarm function. An 'ALARM' indicator light on the front display will illuminate when the alarm is active.
- Snooze Function: When the alarm sounds, press the large 'SNOOZE' button on top to temporarily silence the alarm for a short period. The alarm will sound again after the snooze period ends.
Dimmer Control
Adjust the brightness of the LED display to your preference using the 'DIMMER HI/LO' switch located on the top left of the clock.
- Slide the switch to 'HI' for a brighter display.
- Slide the switch to 'LO' for a dimmer display, suitable for nighttime viewing.
Detailed view of the top panel controls for time and alarm settings.
The clock's display with the dimmer function activated, showing reduced brightness.
Battery Backup
The clock includes a pre-installed CR2032 button cell battery. This battery is used to maintain the time settings in the event of a power interruption, ensuring that you do not need to reset the time when power is restored. The battery is located in a screw-secured compartment at the bottom of the clock and is designed to last for several years.
To replace the battery:
- Unplug the clock from the electrical outlet.
- Locate the battery compartment on the bottom of the clock.
- Unscrew the cover and remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring correct polarity.
- Replace the cover and screw it securely.
- Plug the clock back into the electrical outlet.
Specifications
| Feature | Description |
|---|---|
| Brand | SHARP |
| Model | B08TG8W2QD |
| Color | Midnight Black-white Led |
| Display Type | Digital |
| Special Feature | Automatic Set |
| Product Dimensions | 5.5"W x 2.6"H |
| Power Source | Corded Electric, Battery Powered |
| Backup Battery | CR2032 (pre-installed) |
| Item Weight | 10.2 ounces (0.29 Kilograms) |
| Frame Material | Plastic |
Physical dimensions of the alarm clock.
Troubleshooting
- Time Not Setting Automatically: Ensure the time zone switch on the bottom is correctly set for your region. Verify the clock is securely plugged into a working electrical outlet. The internal CR2032 battery is for backup and does not power the main display.
- Display Too Bright/Dim: Use the 'DIMMER HI/LO' switch on the top of the clock to adjust the display brightness to your preference.
- Alarm Not Sounding: Check that the 'ALARM ON/OFF' button has been pressed and the 'ALARM' indicator light on the front display is illuminated. Ensure the alarm time is correctly set.
- Time Reset After Power Outage: If the time resets after a power outage, the internal CR2032 backup battery may be depleted or improperly installed. Refer to the 'Battery Backup' section for replacement instructions.
Maintenance
To ensure the longevity and optimal performance of your SHARP Digital Alarm Clock, follow these simple maintenance guidelines:
- Cleaning: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Battery Replacement: Replace the CR2032 backup battery every few years or if the clock fails to retain time during a power interruption. Refer to the 'Battery Backup' section for detailed instructions.
- Placement: Place the clock on a stable, flat surface away from direct sunlight, excessive heat, or moisture.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official SHARP website. Keep your purchase receipt as proof of purchase may be required for warranty claims.
