Urmet Wireless Radio Doorbell Kit with Flash - Model 43551 Instruction Manual

1. Introduction

The Urmet Wireless Radio Doorbell Kit with Flash, Model 43551, offers a convenient and reliable solution for your home or office. This kit includes a wireless doorbell unit (chime) with a visual flash indicator and a waterproof push button. It features a selection of 17 melodies, adjustable sound levels, a ringtone cut-off function, and a dedicated alarm function for assisted living applications.

2. Safety Information

• Read all instructions carefully before installation and use.
• Do not expose the units to extreme temperatures, direct sunlight, or excessive moisture.
• Ensure correct battery polarity when inserting batteries into both units.
• Keep batteries out of reach of children. Dispose of used batteries responsibly.
• Do not attempt to open or repair the units yourself. Refer to qualified personnel for service.

3. Package Contents

Please check that all items are present in your package:

• 1x Wireless Doorbell Unit (Chime)
• 1x Waterproof Push Button
• 2x LR03 Batteries (for push button)

Note: 4 x LR14 or LR06 batteries for the chime unit are not supplied and must be purchased separately.

4. Product Overview

Figure 1: Urmet Wireless Radio Doorbell Kit. The larger unit on the left is the chime, and the smaller unit on the right is the push button.

The kit consists of two main components:

• Wireless Doorbell Unit (Chime): This unit receives the signal from the push button and produces the selected melody. It features a speaker, a visual flash indicator for silent alerts, and controls for melody selection and volume adjustment. Its design is white ABS with an aluminum decor.
• Waterproof Push Button: This compact unit is designed for outdoor installation. It is waterproof (IP54 rated) and includes an integrated label holder for personalization. When pressed, it sends a wireless signal to the chime unit.

5. Setup and Installation

5.1 Chime Unit Setup

1. Locate the battery compartment on the back of the chime unit.
2. Open the compartment cover.
3. Insert 4 x LR14 or LR06 batteries (not supplied), ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.
5. Place the chime unit in a central location within your home or office, ensuring it is within the effective wireless range of the push button.

5.2 Push Button Installation

1. Carefully open the push button casing.
2. Insert the 2 x LR03 batteries (supplied), observing correct polarity (+/-).
3. Close the casing securely to maintain its IP54 waterproof rating.
4. Choose a suitable mounting location near your entrance. Ensure the surface is clean and dry.
5. Mount the push button using screws or adhesive (not supplied).
6. Test the connection by pressing the push button. The chime unit should sound and flash.

6. Operating Instructions

6.1 Melody Selection

Press the dedicated melody selection button on the chime unit to cycle through the 17 available melodies. Stop pressing when you hear your preferred melody.

6.2 Volume Adjustment

Use the volume control (usually a dial or button) on the chime unit to adjust the sound level. The maximum sound power is 86 dB(A).

6.3 Mute Function

The chime unit features a ringtone cut-off function. Activate this function to silence the audible chime while still receiving visual notification via the flash indicator. This is useful for quiet periods or when a sleeping individual should not be disturbed.

6.4 Alarm Function (Assisted Living)

The unit includes a special alarm function designed for patient call or assisted living scenarios. Refer to the specific instructions provided with the product packaging or Urmet's official support resources for detailed activation and usage of this feature.

7. Maintenance

7.1 Battery Replacement

• Chime Unit: Replace the 4 x LR14 or LR06 batteries when the sound becomes weak or the unit stops functioning.
• Push Button: Replace the 2 x LR03 batteries when the push button's indicator light (if present) dims or the chime unit no longer responds reliably.
• Always ensure correct battery polarity and dispose of old batteries according to local regulations.

7.2 Cleaning

Clean the exterior of both units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.

7.3 Waterproofing

For the push button, ensure the casing is always securely closed after battery replacement to maintain its IP54 waterproof rating and protect against dust and splashing water.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For detailed warranty information, technical support, or to inquire about spare parts, please refer to the official Urmet website or contact your local authorized Urmet retailer. Please retain your proof of purchase for warranty claims.