CYBEX Solution B2 fix+ Lux High Back Booster Seat Instruction Manual

1. Introduction

This manual provides essential information for the correct installation, use, and maintenance of your CYBEX Solution B2 fix+ Lux High Back Booster Seat. Please read all instructions carefully before using the product to ensure the safety and comfort of your child. This booster seat is designed to grow with your child, offering secure LATCH installation, Linear Side Impact Protection, and a 12-position height-adjustable headrest.

2. Important Safety Information

Always prioritize your child's safety. Failure to follow these instructions can result in serious injury or death.

• Age and Weight Limits: This booster seat is suitable for children weighing between 40 and 120 lbs. and up to 60 inches in height. It is designed for children four years and older.
• Proper Installation: Always install the booster seat securely using the LATCH system and the vehicle's seat belt as instructed. Ensure the seat is stable and does not move excessively.
• Vehicle Seat Belt Use: The vehicle's 3-point seat belt must always be used to secure the child in the booster seat. Ensure the shoulder belt is positioned correctly across the child's shoulder and chest, and the lap belt is low across the hips.
• Side Impact Protection: The Linear Side Impact Protection (L.S.P.) system is designed to absorb impact forces in a side-impact collision. Ensure it is correctly positioned.
• Headrest Position: The headrest must always be adjusted to the correct height, ensuring the child's head is properly supported and contained within the headrest wings.
• Never Leave Child Unattended: Do not leave your child unattended in the booster seat, even for short periods.
• Inspect for Damage: Regularly inspect the booster seat for any signs of wear, damage, or missing parts. Discontinue use if damaged.

3. Product Components

Familiarize yourself with the various parts of your CYBEX Solution B2 fix+ Lux booster seat.

Image 3.1: Overview of the CYBEX Solution B2 fix+ Lux High Back Booster Seat in Bay Blue, showing the main structure, headrest, and integrated cup holders.

• Headrest: Adjustable for height and features a reclining function to prevent head flop.
• Backrest: Provides support and integrates with the headrest.
• Seat Base: The main seating area for the child.
• LATCH Connectors: For secure installation to your vehicle's ISOFIX/LATCH anchors.
• Linear Side Impact Protection (L.S.P.): Integrated side protectors.
• Cup Holders: Two dishwasher-safe cup holders, attachable to either side.

4. Setup and Installation

4.1. LATCH System Installation

The LATCH system provides an easy and secure method for installing the booster seat in most vehicles.

1. Position the booster seat on the desired vehicle seat.
2. Locate the LATCH connectors on the booster seat base.
3. Extend the LATCH connectors and attach them to your vehicle's lower anchor points (ISOFIX/LATCH). Ensure you hear a 'click' indicating a secure connection.
4. Push the booster seat firmly against the vehicle seat back to remove any slack and ensure a tight fit. The green indicators on the LATCH connectors should be visible, confirming correct attachment.

Image 4.1: Detail of the LATCH connectors extending from the booster seat base, ready for attachment to vehicle anchors.

4.2. Headrest Adjustment

The 12-position height-adjustable headrest allows you to adapt the booster seat to your child's growth, ensuring optimal safety and comfort.

1. Locate the headrest adjustment handle, typically at the back or top of the headrest.
2. Squeeze or lift the handle to unlock the headrest.
3. Slide the headrest up or down to the desired height. The bottom of the headrest should be level with or slightly above your child's shoulders.
4. Release the handle to lock the headrest into position. Ensure it is securely locked before placing your child in the seat.

Image 4.2: Illustration demonstrating the upward and downward adjustment of the headrest to accommodate a growing child.

5. Operating Instructions

5.1. Securing Your Child

Always use the vehicle's 3-point seat belt to secure your child in the booster seat.

1. Place your child in the booster seat, ensuring their back is flat against the backrest.
2. Pull the vehicle's seat belt across your child. The lap belt portion should sit low across your child's hips, touching the thighs.
3. Thread the shoulder belt through the red belt guide on the headrest. The shoulder belt should lie flat across your child's shoulder and chest, not on the neck or off the shoulder.
4. Buckle the seat belt and pull any slack to ensure a snug fit.

Image 5.1: Comparison showing incorrect (left) and correct (right) head positioning for a child in the booster seat, highlighting how the headrest prevents the head from falling forward during sleep.

5.2. Using the Cup Holders

The booster seat includes two dishwasher-safe cup holders for convenience.

1. Locate the attachment slots on either side of the booster seat base.
2. Align the cup holder with a slot and push firmly until it clicks into place.
3. To remove, gently pull the cup holder out of the slot.

Image 5.2: Front view of the booster seat with both dishwasher-safe cup holders attached to the sides of the seat base.

6. Care and Maintenance

Proper care ensures the longevity and hygiene of your booster seat.

• Fabric Covers: The fabric covers can be machine washed separately in cold water on a delicate cycle. Do not use bleach. Drip dry only; do not tumble dry.
• Plastic and Metal Parts: Wipe plastic and metal parts with a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
• Cup Holders: The cup holders are dishwasher safe for easy cleaning.
• Storage: When not in use, store the booster seat in a cool, dry place away from direct sunlight.

7. Troubleshooting

If you encounter issues with your booster seat, refer to these common solutions.

• Booster Seat Feels Loose After LATCH Installation: Ensure the LATCH connectors are fully engaged (green indicators visible) and push the seat firmly into the vehicle seat back to remove all slack.
• Headrest Not Adjusting: Check that the adjustment handle is fully engaged. Ensure no fabric or debris is obstructing the sliding mechanism.
• Vehicle Seat Belt Not Fitting Correctly: Re-check the headrest height adjustment. The shoulder belt guide must be positioned so the belt lies flat across the child's shoulder, not on the neck. Ensure the lap belt is low across the hips.
• Cup Holder Not Attaching: Ensure the cup holder is correctly aligned with the slot and pushed firmly until it clicks.

8. Product Specifications

9. Warranty and Customer Support

For warranty information, product registration, or customer support, please refer to the official Cybex website or contact their customer service department. Keep your proof of purchase for any warranty claims.

For further assistance, please visit: www.cybex-online.com