1. Introduction
Thank you for purchasing the Genesis Helium 100BT 2.0 Bluetooth RGB Speakers. This manual provides essential information for the safe and efficient use of your new speakers. Please read it carefully before use and retain it for future reference.
2. Safety Information
- Do not expose the device to moisture, dust, or extreme temperatures.
- Do not attempt to disassemble or repair the speakers yourself. Refer all servicing to qualified personnel.
- Ensure the power source matches the voltage requirements specified for the speakers.
- Keep the speakers away from strong magnetic fields.
- Avoid placing heavy objects on the speaker cables.
3. Package Contents
Verify that all components are present in the package:
- Genesis Helium 100BT 2.0 Bluetooth RGB Speakers (2 units)
- Power Cable
- User Manual
4. Setup
4.1 Physical Connection
- Place the speakers on a stable surface, ensuring adequate ventilation.
- Connect the power cable to the main speaker and then to a power outlet.
- Connect the secondary speaker to the main speaker using the integrated cable.
Figure 1: Rear view of the speakers illustrating the cable connections.
4.2 Bluetooth Pairing
- Power on the speakers by pressing the power button. The RGB lighting will illuminate.
- Press the 'M' button on the main speaker to switch to Bluetooth mode. The indicator light will flash, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "Genesis Helium 100BT" from the list of devices.
- Once paired, the indicator light on the speaker will stop flashing and remain solid.
Figure 2: Front view of the main speaker, highlighting the control panel for mode selection and volume.
4.3 Wired Connection (AUX)
To connect via a 3.5mm audio jack:
- Connect a 3.5mm audio cable from your audio source to the AUX input port on the main speaker.
- Press the 'M' button to switch to AUX mode.
5. Operating Instructions
5.1 Power On/Off
- Press the Power button () to turn the speakers on or off.
5.2 Volume Control
- Press the + button to increase volume.
- Press the - button to decrease volume.
5.3 Mode Selection
- Press the M button to cycle between Bluetooth and AUX input modes.
5.4 RGB Lighting
The speakers feature integrated RGB lighting. The lighting effects are typically automatic or can be controlled via a dedicated button if available (refer to the 'M' button for mode cycling, which may also affect lighting modes).
Figure 3: Examples of the dynamic RGB lighting effects on the Genesis Helium 100BT speakers.
6. Maintenance
6.1 Cleaning
- Disconnect the speakers from the power source before cleaning.
- Use a soft, dry cloth to wipe the exterior surfaces.
- Do not use liquid cleaners, aerosols, or abrasive materials.
6.2 Storage
- Store the speakers in a cool, dry place when not in use for extended periods.
- Protect the speakers from dust and direct sunlight.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound | Speakers not powered on; Volume too low; Incorrect input mode; Device not connected. | Ensure speakers are on; Increase volume; Select correct input mode (Bluetooth/AUX); Reconnect device. |
| Bluetooth not connecting | Speakers not in pairing mode; Device Bluetooth off; Speakers too far from device. | Ensure speakers are in Bluetooth pairing mode; Turn on device Bluetooth; Move speakers closer to device (within 10 meters). |
| RGB lighting not working | Speakers not powered on; Specific lighting mode not selected. | Ensure speakers are powered on; Cycle through modes using the 'M' button to check if lighting activates. |
| Distorted audio | Volume too high; Poor audio source quality; Interference. | Reduce volume; Try a different audio source; Move speakers away from other electronic devices. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Helium 100BT RGB |
| Model Number | NCS-1635 |
| Speaker Type | 2.0 Channel, Boomer |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth |
| Output Power | 10 Watts |
| Maximum Range | 10 Meters |
| Control Method | Tactile |
| Power Source | Cable Electric |
| Input Voltage | 120 Volts |
| Product Dimensions (L x W x H) | 2.79 x 24.64 x 16.51 cm |
| Item Weight | 1.32 Kilograms |
| Color | Black |
| Compatible Devices | Cellphone, Computer, Smartphone, Tablet |
9. Warranty and Support
The Genesis Helium 100BT speakers come with a guarantee of spare parts availability for 2 years from the date of purchase. For technical support, warranty claims, or further assistance, please contact your retailer or visit the official Genesis website.
Please retain your proof of purchase for warranty purposes.
