YING RAY A2-TWINS20210113-A4-10

Download PDF
Contents

YING RAY Remote Control Instruction Manual

For ClassicFlame Electric Fireplace and Stove Heaters

Introduction

This manual provides instructions for the YING RAY replacement remote control, model A2-TWINS20210113-A4-10. This remote is designed for use with various Twin Star ClassicFlame electric fireplace and stove heater models. Please refer to the 'Specifications' section for a list of compatible models. This remote control operates without the need for programming; simply install batteries to begin use.

Setup

Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards to open it.
  3. Insert two AAA 1.5V batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.

The remote control is ready for use immediately after battery installation. No additional programming is required.

Back of the YING RAY remote control with the battery cover removed, showing the empty battery compartment.

Image: Back of the remote control with the battery cover removed, illustrating the battery compartment for AAA batteries.

Back of the YING RAY remote control with the battery cover closed.

Image: Back of the remote control with the battery cover securely closed.

Operating Instructions

Point the remote control directly at the infrared receiver on your ClassicFlame electric fireplace or stove heater. Ensure there are no obstructions between the remote and the unit.

Front view of the YING RAY remote control showing all buttons and their symbols.

Image: Front view of the remote control, displaying the layout of its buttons.

Button Functions

  • Power Button (⑂): Turns the electric fireplace/heater ON or OFF.
  • Timer Button (⏱): Activates or adjusts the sleep timer function.
  • Flame Brightness Button (☼): Adjusts the intensity of the flame effect.
  • Heater Button (♨): Controls the heater function, typically cycling through heat settings or turning it on/off.
  • Light Button (💡): Controls additional lighting features, if available on your unit.

Maintenance

Battery Replacement

Replace batteries when the remote control's range decreases or it becomes unresponsive. Always replace both batteries simultaneously with new AAA 1.5V batteries. Do not mix old and new batteries or different types of batteries.

Cleaning

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the surface or internal components.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.

Troubleshooting

  • Remote not responding:
    • Ensure fresh AAA batteries are correctly installed.
    • Check for any obstructions between the remote control and the fireplace/heater's infrared receiver.
    • Ensure you are within the effective operating range of the fireplace/heater.
  • Intermittent operation:
    • Replace batteries.
    • Verify that the remote is pointed directly at the unit.

Specifications

BrandYING RAY
Model NumberA2-TWINS20210113-A4-10
Controller TypeButton Control
Battery TypeAAA (1.5V)
Special FeatureErgonomic design
Compatible Devices18EF031GRP, 18EF031SRP, 23EF031GRP, 23EF031SRP, 25EF031GRP, 26EF031GRP, 26EF031SRP, 328EF031GRP, 28EF031SRP, 32EF031GRP, 33EF031GRP, 33EF031SRP, and other similar ClassicFlame models.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.