Introduction
Thank you for choosing the Quntis 52cm Monitor Light. This manual provides essential information for the safe and efficient use of your new monitor light. Please read it thoroughly before installation and operation, and retain it for future reference.
Product Overview
The Quntis 52cm Monitor Light is designed to provide optimal illumination for your workspace while minimizing eye strain. It features automatic dimming, stepless brightness and color temperature adjustment, and a non-asymmetric optical design to prevent screen glare. The light is powered via USB and is suitable for various monitor types.
Image: Overview of the Quntis 52cm Monitor Light, showcasing its sleek design and placement above a monitor.
Package Contents
- Quntis ScreenLinear L206 Light Body
- USB-C Cable (1.5m)
- User Manual
Setup Instructions
- Unpack the Device: Carefully remove all components from the packaging.
- Attach to Monitor: Place the monitor light on top of your monitor. The clip mechanism is designed to securely hold the light in place. Ensure the light bar is centered and stable. The light is compatible with monitors between 0.7cm and 3.5cm thick.
- Connect Power: Connect the provided USB-C cable to the light and then to a stable 5V-1A USB power source (e.g., a PC USB port or a stable power adapter). Avoid unstable power sources like USB charging hubs or mobile power banks, as this may cause flickering.
Image: Diagram illustrating compatibility with various monitor types (ordinary, ultra-thin, curved/irregular) and their respective thickness ranges.
Image: Close-up view of the USB-C port on the monitor light, showing the connection point for power.
Operating Instructions
The Quntis Monitor Light features both automatic and manual control modes for brightness and color temperature.
Control Panel
The control buttons are located on the top of the light bar.
Image: Detailed view of the control buttons on the monitor light, including power, brightness, color temperature, and auto-dimming.
Power On/Off
- Press the power button (⏻) to turn the light on or off.
Automatic Dimming Mode
- Touch the auto-dimming button (often indicated by a light sensor icon) to activate automatic brightness adjustment. The light will detect ambient brightness and adjust its output accordingly.
- Ensure the light sensor is not obstructed for accurate automatic adjustment.
Image: Illustration of the auto-dimming function, showing a light meter reading and the light adjusting to provide optimal illumination (≥700 Lux).
Manual Brightness Adjustment
- In manual control mode, use the brightness adjustment buttons (often indicated by sun icons) to steplessly adjust the brightness from 5% to 100%.
Image: Graphic demonstrating the stepless brightness adjustment range from 5% to 100% on the monitor light.
Color Temperature Adjustment
- Use the color temperature adjustment buttons (often indicated by a thermometer icon) to change the color temperature from 3000K (warm white) to 6500K (cool white).
Image: Display showing the range of color temperatures from 3000K (warm) to 6500K (cool) and brightness levels.
Memory Function
- The light features a memory function that retains your last brightness and color temperature settings when turned off and on again.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the surface of the light. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the light in a cool, dry place away from direct sunlight.
- Avoid Water: This product is not waterproof. Avoid exposure to water or high humidity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power or loose connection. | Check if the USB-C cable is securely connected to both the light and the power source. Ensure the power source is active. |
| Light flickers. | Unstable power supply. | Connect the light to a stable 5V-1A USB power source, such as a PC's USB port or a dedicated wall adapter. Avoid USB hubs or mobile power banks. |
| Auto-dimming not working correctly. | Light sensor obstructed. | Ensure nothing is blocking the light sensor on the light bar. |
| Screen glare or reflection. | Incorrect light positioning. | Adjust the angle of the light bar to ensure the non-asymmetric optical design directs light onto your desk, not the screen. |
Product Specifications
- Model: LI-HY-0206-BK-QU-WS
- Color Rendering Index (CRI): Ra > 95
- Brightness Adjustment: 5% to 100% (Stepless)
- LED Chip Count: 100 (50 warm + 50 cool)
- Color Temperature Adjustment: 3000K to 6500K (Stepless)
- Power Input: 5V-1A via USB-C (1.5m cable included)
- Materials: Aluminum Alloy, PC, ABS
- Dimensions: 52cm (Length) x 2cm (Width) x 2cm (Height)
- Weight: 600g
- Certifications: RoHS, CE, FCC
- Recommended Monitor Thickness: 0.7cm to 3.5cm
- Wattage: 5 W
- Light Source Type: LED
- Switch Type: Touch
- Mounting Type: Monitor Clip-on
Image: Visual comparison demonstrating the high color rendering index (CRI > 95 Ra) of the Quntis light compared to others (CRI < 80).
Image: Diagram illustrating the 45-degree non-asymmetric optical design that prevents screen reflection and glare, contrasting with conventional desk lights.
Warranty Information
Quntis provides an 18-month product warranty service from the date of purchase. To utilize after-sales support, your order number will be required as proof of purchase.
Support
For any questions, concerns, or technical assistance, please contact Quntis customer support. Refer to your purchase platform or the Quntis official website for contact details.