1. Product Overview
The Turbosound iQ TS-PC10-1 is a deluxe water-resistant protective cover designed specifically for 10-inch loudspeakers, including the Turbosound iQ10 model. This cover provides essential protection against environmental elements, dirt, dust, and minor impacts during transport and storage, ensuring the longevity and pristine condition of your valuable audio equipment.
This manual provides detailed instructions for the proper use and care of your TS-PC10-1 protective cover.
2. Key Features
- Deluxe water resistant protective cover for 10" loudspeakers.
- Rugged black multi-layer nylon outer material prevents ingress of dirt and dust.
- Thick interior foam padding provides superior protection in transit.
- Openings in cover allow access to built-in cabinet handles.
- Ideal for Turbosound iQ10, and other compatible 10" loudspeakers.
3. Setup and Installation
To install the TS-PC10-1 protective cover, follow these steps:
- Ensure your 10-inch loudspeaker is powered off and disconnected from all cables.
- Carefully slide the cover over the top of the loudspeaker.
- Align the openings in the cover with the speaker's built-in handles.
- Gently pull the cover down until it fully encases the speaker, ensuring a snug and secure fit.
The design allows for easy access to the speaker's handles for convenient transport while the cover is installed.
Front view of the Turbosound iQ TS-PC10-1 protective cover fitted onto a loudspeaker, showcasing the Turbosound logo.
Side view of the Turbosound iQ TS-PC10-1 protective cover on a loudspeaker, highlighting its snug fit.
Angled view of the protective cover, showing the top opening designed for accessing the loudspeaker's built-in handle.
Another angled view of the protective cover, emphasizing the handle access point at the top.
4. Operating Instructions
The TS-PC10-1 protective cover is designed for passive protection. Once installed, it provides continuous safeguarding for your loudspeaker against dust, dirt, and minor physical abrasions.
- Transport: When transporting the speaker, utilize the speaker's built-in handles through the cover's designated openings. This ensures secure handling while maintaining protection.
- Storage: For long-term storage, ensure the cover is properly fitted to protect against dust accumulation and environmental moisture.
5. Maintenance and Care
Proper maintenance will extend the life and effectiveness of your protective cover:
- Cleaning: Regularly wipe down the exterior of the cover with a soft, damp cloth to remove dust and light dirt. For more stubborn stains, a mild soap solution can be used, followed by wiping with a clean, damp cloth to remove any soap residue.
- Drying: Always allow the cover to air dry completely before re-applying it to a loudspeaker or storing it. Do not machine wash or tumble dry.
- Avoid Chemicals: Do not use harsh chemicals, solvents, or abrasive cleaners, as these may damage the material and compromise the water-resistant properties of the cover.
- Storage: When not in use, store the cover in a cool, dry place away from direct sunlight.
6. Troubleshooting
This section addresses common issues you might encounter with your protective cover.
- Issue: Cover does not fit properly.
Solution: Ensure the loudspeaker is a 10-inch model, such as the Turbosound iQ10. Verify the cover is oriented correctly, with handle openings aligned with the speaker's handles. - Issue: Cover appears dirty or stained.
Solution: Refer to the 'Maintenance and Care' section for proper cleaning instructions. - Issue: Material damage (e.g., tears, significant abrasions).
Solution: If the cover is torn or significantly damaged, its protective capabilities may be compromised. Consider replacing the cover to ensure optimal protection for your loudspeaker.
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | TS-PC10-1 |
| Item Weight | 1.23 pounds (0.56 kg) |
| Product Dimensions | 20.08 x 2.76 x 12.99 inches (510 x 70 x 330 mm) |
| Material | Rugged black multi-layer nylon with interior foam padding |
| Compatibility | 10-inch loudspeakers, including Turbosound iQ10 |
| Date First Available | February 8, 2021 |
Product tag for the TS-PC10-1 protective cover, displaying model number, manufacturer details, and compliance markings.
8. Warranty and Support
For detailed warranty information, technical support, or service inquiries regarding your Turbosound iQ TS-PC10-1 protective cover, please contact Turbosound customer service or visit the official Turbosound website. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.
You can typically find contact information and support resources on the official Turbosound website or through your authorized dealer.