1. Introduction and Overview
The GE LED+ Motion Sensor LED Light Bulbs are designed to provide convenient and energy-efficient illumination for your outdoor spaces. These PAR38 floodlight bulbs automatically detect motion, activating the light when needed and turning off when no motion is detected, contributing to energy savings and enhanced security. They are built with durable LED technology for long-lasting performance and are wet-rated for reliable outdoor use.
Key features of the GE LED+ Motion Sensor LED Light Bulb.
Benefits of using LED lighting technology.
2. What's Included
Your package contains the following items:
- Two (2) GE LED+ Motion Sensor PAR38 Outdoor Flood Light Bulbs
- Quick Start Guide
Contents of the GE LED+ Motion Sensor LED Light Bulbs package.
3. Specifications
| Specification | Value |
|---|---|
| Light Type | LED |
| Wattage | 15 Watts |
| Incandescent Equivalent | 90 Watts |
| Brightness | 1200 Lumens |
| Color Temperature | 3000 Kelvin (Warm White) |
| Bulb Shape Size | PAR38 |
| Bulb Base | E26 Medium |
| Voltage | 120 Volts |
| Average Life | 15,000 Hours (approx. 13.7 years) |
| Sensor Technology | Motion Sensor (Infrared) |
| Motion Detection Angle | 90 degrees |
| Motion Detection Range | Up to 24 feet |
| Indoor/Outdoor Usage | Outdoor (Wet-Rated) |
The bulbs are wet-rated for reliable outdoor performance.
The bulbs feature a standard E26 Medium Base for easy installation.
4. Setup & Installation
Installing your GE LED+ Motion Sensor LED Light Bulbs is straightforward and requires no complex wiring, apps, or hubs. Simply follow these steps:
- Ensure Power is Off: Before installation, turn off the power to the light fixture at the switch or circuit breaker to prevent electrical shock.
- Screw in the Bulb: Carefully screw the GE LED+ Motion Sensor light bulb into a fixture that accommodates an E26 medium base. Ensure it is securely tightened.
- Restore Power: Turn the power back on at the switch or circuit breaker.
- Initial Test: The bulb will activate automatically when motion is detected in a dark environment.
Note: These bulbs are not designed for use with dimmer switches.
5. Operating Instructions
The GE LED+ Motion Sensor LED Light Bulbs are designed for automatic operation based on motion and ambient light levels. They will turn on when motion is detected in a dark environment and turn off after a period of no motion to conserve energy.
Automatic Motion Detection
The advanced motion sensor has a 90-degree viewing angle and can detect motion within 24 feet. This ensures reliable illumination when approaching your home or outdoor areas at night.
The bulb's sensor provides a wide detection area.
Energy Saving Functionality
The bulbs are designed to turn off automatically when no motion is detected, significantly reducing energy consumption and extending the bulb's lifespan.
Automatic shut-off feature for energy efficiency.
Activating 'Always-On' Mode (Manual Override)
In situations where you may want the light to remain on continuously, regardless of motion, you can activate an 'always-on' mode. This is typically achieved by a quick sequence of turning the light switch off and on. While specific timing may vary slightly, a common method is:
- Ensure the light is currently OFF.
- Quickly flip the light switch ON, then OFF, then ON again within approximately 3 seconds.
- The bulb should flash once to confirm it has entered 'always-on' mode.
To return to motion-sensing mode, simply turn the light switch OFF for more than 3 seconds, then turn it back ON. The bulb will reset to its default motion-sensing operation.
Lights activate automatically when motion is detected.
6. Maintenance
GE LED+ Motion Sensor LED Light Bulbs require minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the bulb. Avoid using liquid cleaners or abrasive materials, as they may damage the bulb's surface or internal components.
- Inspection: Periodically check the bulb and fixture for any signs of damage or loose connections.
- Environmental Conditions: While wet-rated, avoid direct high-pressure water spray or prolonged submersion. Ensure the fixture provides adequate protection from extreme weather conditions.
7. Troubleshooting
If you encounter issues with your GE LED+ Motion Sensor LED Light Bulbs, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not turn on. | No power to the fixture; Bulb not screwed in properly; Ambient light is too high; Motion not detected. | Check power switch and circuit breaker. Ensure bulb is securely tightened. Test in a darker environment. Move within the sensor's detection range (up to 24ft). |
| Bulb stays on continuously. | 'Always-on' mode is activated; Constant motion in detection area; Sensor obstruction. | Turn the light switch OFF for more than 3 seconds, then ON to reset to motion-sensing mode. Ensure no continuous motion is occurring. Clear any obstructions near the sensor. |
| Bulb turns on/off erratically. | Intermittent power supply; Interference from other light sources; Sensor sensitivity. | Check electrical connections. Ensure no flickering lights or strong light sources are interfering. Consider repositioning the fixture if possible. |
| Motion detection range is poor. | Obstructions; Incorrect mounting height/angle; Extreme temperatures. | Ensure clear line of sight for the sensor. Verify the bulb is mounted at an optimal height and angle. Performance may be affected by extreme cold or heat. |
8. Warranty & Support
Limited Warranty
GE Lighting provides a 5-year limited warranty for the GE LED+ Motion Sensor LED Light Bulbs. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
Your GE LED+ bulbs are backed by a 5-year limited warranty.
Customer Support
For further assistance, technical support, or warranty inquiries, please visit the official GE Lighting website or contact their customer service department. Refer to the quick start guide included in your package for specific contact details or online resources.
Thank you for choosing GE LED+ Motion Sensor LED Light Bulbs.
