BOMAZ 0748303987511

BOMAZ Replacement Remote Control for Sony Soundbars HT-S100F, HT-SF200, HT-SF150 User Manual

Introduction

This manual provides instructions for the BOMAZ Replacement Remote Control, designed for use with specific Sony Soundbar models. This remote control offers direct functionality without the need for programming or complex setup, serving as a convenient replacement for your original remote.

Compatible Sony Soundbar Models:

Sony HT-S100F
Sony HT-SF200
Sony HT-SF150

Setup

The BOMAZ Replacement Remote Control is designed for immediate use with compatible Sony Soundbars. No programming or pairing is required.

Battery Installation

Locate the battery compartment on the back of the remote control.
Slide the battery cover downwards to open it.
Insert two (2) AAA alkaline batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
Slide the battery cover back into place until it clicks securely.

Image showing the back of the remote control with the battery compartment open and two AAA batteries being inserted.

Figure 1: Battery compartment with AAA batteries. Ensure correct polarity during installation.

Note: Batteries are not included with the remote control and must be purchased separately.

Operating Instructions

This remote control provides full functionality for your compatible Sony Soundbar. Point the remote directly at the soundbar's infrared receiver for optimal performance.

Front view of the BOMAZ replacement remote control, showing all buttons and their labels.

Figure 2: Front view of the remote control with button layout.

Button Functions:

Button	Function
INPUT	Selects the audio input source (e.g., TV, HDMI, Bluetooth).
I/O (Power)	Turns the soundbar On or Off.
AUTO SOUND	Activates automatic sound optimization.
STANDARD	Sets the sound mode to standard.
CINEMA	Optimizes sound for movie viewing.
MUSIC	Optimizes sound for music listening.
VOICE	Enhances vocal clarity.
NIGHT	Adjusts sound for low-volume listening, reducing sudden loud sounds.
Volume (+/-)	Increases or decreases the soundbar volume.
Mute (Speaker icon)	Mutes or unmutes the soundbar audio.
PLAY MODE	Cycles through playback modes (if applicable to the soundbar's source).
AUDIO	Adjusts audio settings or modes.
Navigation (Up/Down/Left/Right)	Used for menu navigation on compatible soundbar displays.
ENTER	Confirms selections in menus.
Playback Controls (Rewind, Play/Pause, Fast Forward, Previous, Stop, Next)	Controls media playback for connected devices (e.g., Bluetooth, USB).

A person sitting on a couch using the remote control to operate a soundbar connected to a television.

Figure 3: Remote control in typical usage scenario.

Maintenance

Battery Replacement

When the remote control's performance degrades or it stops responding, it is likely time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section.

Always replace both AAA batteries at the same time.
Do not mix old and new batteries, or different types of batteries.
Remove batteries if the remote control will not be used for an extended period to prevent leakage.
Dispose of used batteries responsibly according to local regulations.

Cleaning

To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the remote's surface or internal components.

Troubleshooting

Problem	Possible Cause / Solution
Remote control does not work.	Batteries are dead or incorrectly installed: Replace batteries with new AAA alkaline batteries, ensuring correct polarity. Obstruction between remote and soundbar: Ensure there is a clear line of sight between the remote control and the soundbar's infrared receiver. Remote is too far from the soundbar: Move closer to the soundbar. Soundbar is not powered on: Ensure the soundbar is plugged in and powered on.
Buttons are unresponsive or sticky.	Low batteries: Replace batteries. Dirt or debris: Clean the remote control with a soft, dry cloth.

Problem

Possible Cause / Solution

Remote control does not work.

Batteries are dead or incorrectly installed: Replace batteries with new AAA alkaline batteries, ensuring correct polarity.
Obstruction between remote and soundbar: Ensure there is a clear line of sight between the remote control and the soundbar's infrared receiver.
Remote is too far from the soundbar: Move closer to the soundbar.
Soundbar is not powered on: Ensure the soundbar is plugged in and powered on.

Buttons are unresponsive or sticky.

Low batteries: Replace batteries.
Dirt or debris: Clean the remote control with a soft, dry cloth.

Specifications

Feature	Detail
Brand	BOMAZ
Model Number	0748303987511
Compatible Devices	Sony Soundbars HT-S100F, HT-SF200, HT-SF150
Power Source	2 x AAA Batteries (not included)
Color	Black
Item Weight	1.76 ounces (approximately 50 grams)
Package Dimensions	7.68 x 4.84 x 1.14 inches (19.5 x 12.3 x 2.9 cm)
Special Feature	Ergonomic design

Warranty and Support

Specific warranty information for this BOMAZ product is not provided in the available documentation. For warranty claims or technical support, please refer to the seller or manufacturer's contact information provided at the point of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.