Introduction
Thank you for purchasing the IPEGA Wireless Switch Controller. This manual provides detailed instructions on how to set up, operate, and maintain your new gamepad. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Figure 1: IPEGA Wireless Switch Controller in use with a tablet device, showcasing its telescopic design.
Product Features
- Multi-Platform Compatibility: Designed for N-Switch, P3, Android devices, and PC (Win 7/8/10). Note: Does not support MediaTek chips.
- Enhanced Gaming Experience: Features six-axis gyroscope function for precise motion control and dual motor vibration for immersive feedback.
- Ergonomic Design: Full ergonomic structure provides a comfortable hand feeling during extended gaming sessions.
- Telescopic Bracket: Integrated lever telescopic bracket with a super long telescopic function, adjustable from 130mm to 280mm (approximately 5.1 to 11 inches), suitable for various devices including N-Switch host and tablets.
- Long Battery Life: Built-in 300mAh high-performance lithium battery offers over 10 hours of continuous use and up to 30 days of standby time on a full charge.
- Convenient Controls: Equipped with a screen capture button and multimedia buttons (volume+, -, last, next, Play/Pause) for Android devices.
Figure 2: The controller's telescopic design, suitable for various devices.
Figure 3: Illustration highlighting the built-in six-axis gyroscope for motion control.
Figure 4: Illustration demonstrating the dual motor vibration feature for haptic feedback.
Figure 5: The telescopic rod's adjustable range (130-280mm) and compatibility with Switch Mobile Device, Android Phone, and PC Tablet.
Figure 6: Detail of the controller's ergonomic structure designed for comfortable hand feeling.
Figure 7: Highlighting the high sensitivity buttons and other key features like dual motor vibration, six-axis gyroscope, and super long stretch function.
Setup
Before using your IPEGA Wireless Switch Controller, ensure it is adequately charged. Connect the included USB cable to the controller's charging port and to a USB power source (e.g., computer, USB wall adapter). The charge indicator will show charging status.
Operating Modes
N-Switch Connection Mode
- First-time Pairing:
- Turn on your Nintendo Switch Console.
- From the HOME Menu, navigate to Controllers, then select Change Grip and Order.
- On the IPEGA controller, press and hold down the "B" + "HOME" buttons simultaneously for 2 seconds. The SEARCH indicators on the controller will flash quickly.
- Once successfully paired, the indicators will turn on solid. Press "A" on the controller when prompted to confirm.
- Re-Pairing:
- Press and hold down the "HOME" button for 2 seconds to turn on the controller.
- The SEARCH indicator will flash slowly, indicating it's in re-pair mode. The controller will automatically attempt to connect to the previously paired console.
- Once connected, press "A" when you're ready to play.
- Wake-up Controller:
- If the controller is in sleep mode, press the "HOME" button to wake it up.
- It will automatically connect to the console.
- Press "A" when you're ready.
Android Mode
- Press and hold down the "Y" + "HOME" buttons simultaneously for 2 seconds to turn on the controller. The SEARCH indicators will flash quickly.
- On your Android device, enable Bluetooth and search for available devices. Select "PG-SW029" to pair.
- Once successfully paired, the SEARCH indicator on the controller will turn on solid, indicating it has entered Android Mode.
- The controller supports standard Android HID games.
P3 Mode (PlayStation 3)
- Press and hold down the "A" + "HOME" buttons simultaneously for 2 seconds to turn on the controller. The SEARCH indicators will flash quickly.
- Connect the controller to your P3 console using the provided USB cable. Press the "HOME" button to initiate pairing.
- Once paired successfully, the corresponding SEARCH indicator will turn on solid, indicating the gamepad has entered P3 mode.
- You can then unplug the USB cable, and the controller will operate in wireless connection mode.
Maintenance
- Keep the controller away from extreme temperatures, direct sunlight, and humid environments.
- Avoid dropping or subjecting the controller to strong impacts.
- Clean the controller with a soft, dry cloth. Do not use chemical solvents or abrasive cleaners.
- When not in use for extended periods, store the controller in a cool, dry place.
- Do not attempt to disassemble or modify the controller, as this will void the warranty and may cause damage.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Controller does not turn on. | Ensure the controller is fully charged. Connect it to a power source using the USB cable. |
| Controller fails to pair with device. |
|
| Input lag or disconnection during gameplay. |
|
| Buttons or joysticks are unresponsive. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | PG-SW029 |
| Brand | ipega |
| Connectivity | Wireless (Bluetooth) |
| Transmission Distance | ≤ 26ft (8 meters) |
| Battery Capacity | 300mAh Lithium Battery |
| Continuous Usage Time | > 10 hours |
| Standby Time | Up to 30 days |
| Telescopic Range | 130mm - 280mm (approx. 5.1 - 11 inches) |
| Product Dimensions | 23.7 x 12.5 x 5.99 cm (9.33 x 4.92 x 2.36 inches) |
| Compatibility | Nintendo Switch, PlayStation 3, Android Phones/Tablets, PC (Win 7/8/10) |
Figure 8: Detailed dimensions of the controller and its retail packaging.
Package List
The following items are included in your product package:
- Wireless Gamepad x1
- User Manual x1 (This document)
- USB Cable x1
Warranty and Support
For warranty information and technical support, please refer to the contact details provided by your retailer or visit the official IPEGA website. Keep your purchase receipt as proof of purchase for warranty claims.
If you encounter any issues not covered in this manual, please contact customer support for assistance.
