LIQUIPEL Armortek Liquid Glass Screen Protector User Manual

Introduction

The LIQUIPEL Armortek Liquid Glass Screen Protector provides advanced screen protection for a wide range of smart devices, including smartphones, tablets, and wearables. This universal nano liquid screen protector is formulated to increase impact and scratch resistance, helping to maintain your device's screen in pristine condition.

What's Included

Your LIQUIPEL Armortek Liquid Glass Screen Protector package typically includes:

• 1x Vial of Armortek Liquid Glass Screen Protector
• 1x Alcohol Wipe
• 1x Microfiber Cloth

Image: LIQUIPEL Armortek Liquid Glass Screen Protector packaging, showing the product box with a smartphone and smartwatch illustration.

Setup: Device Preparation

Before applying the liquid glass, ensure your device's screen is thoroughly cleaned and dry to achieve optimal adhesion and protection.

1. Clean the Surface: Use the provided alcohol wipe to thoroughly clean the entire surface of your device's screen.
2. Dry Completely: Once cleaned, use the microfiber cloth to dry the screen completely. Ensure no moisture, dust, or smudges remain.

Image: A smartphone screen illustrating the benefits of liquid glass protection, including increased shatter resistance and 9H sapphire hardness. This image also contains visual cues for the application process.

Operating: Application Instructions

Follow these steps carefully to apply the Armortek Liquid Glass Screen Protector to your device.

1. Open the Vial: Twist off the top of the liquid glass vial.
2. Apply Liquid Glass: Gently press the bottle and spread the liquid evenly across the entire screen surface. Ensure the liquid covers the whole screen, including the edges, until the bottle is empty.
3. Initial Drying: Allow your device to dry for 5 minutes.
4. Buff the Screen: Use the microfiber cloth to buff off any remaining solution from the screen.
5. Full Curing: The product will fully cure and provide maximum protection after 24 hours. Avoid heavy use or exposure to harsh conditions during this curing period.

Image: Visual representation of the dropper application method for LIQUIPEL Armortek Liquid Glass, emphasizing its scratch protection capabilities.

Image: A detailed illustration comparing a coated screen with LIQUIPEL Armortek Liquid Glass to an uncoated screen, demonstrating how the nano-coating fills microscopic cracks for enhanced durability.

Maintenance

Once applied and cured, the LIQUIPEL Armortek Liquid Glass requires minimal maintenance. Simply clean your device's screen as you normally would with a soft, lint-free cloth. Avoid abrasive cleaners or materials that could potentially damage the coating or the screen itself.

Troubleshooting

• Uneven Application/Streaks: If you notice streaks or an uneven finish immediately after application, it may be due to insufficient buffing or not spreading the liquid evenly. Re-buff the screen gently with the microfiber cloth. If the issue persists after curing, contact customer support.
• Lack of Protection: Ensure the product was applied correctly and allowed to cure for the full 24 hours. The protection is not instant. If you experience damage after proper application and curing, refer to the warranty and protection plan information.
• Bubbles: Liquid glass application typically does not result in bubbles, unlike traditional film screen protectors. If you observe any anomalies, ensure the screen was perfectly clean and dry before application.

Specifications

Warranty & Protection Plan

The LIQUIPEL Armortek Liquid Glass Screen Protector may include an optional protection plan (e.g., $100, $200, or $300 coverage) against screen breakage. To activate your protection plan, follow these steps:

1. Download the App: Download the "InstaProtek" App from the Apple App Store or Google Play Store.
2. Register Your Product: Open the app and follow the instructions to register your device. You will need your proof of purchase receipt and the UPC barcode located on the back of the product packaging to complete registration.
3. Complete Registration: Finish the registration process within the app.

For further support or to inquire about your protection plan, please refer to the contact information provided with your product packaging or visit the official LIQUIPEL website.

Image: Product packaging displaying different protection plan values ($100, $200, $300) available with the Armortek Liquid Glass Screen Protector.

Important Warnings

• Keep Out of Reach: Keep this product out of reach of children.
• Flammability: Keep away from sources of ignition. This product is flammable.
• Eye Contact: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
• Ingestion: If swallowed, seek medical advice immediately and show the container or label to the medical professional.
• California Proposition 65 Warning: This product may expose you to chemicals, including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.

Image: Rear packaging of the LIQUIPEL Armortek Liquid Glass, detailing universal compatibility, product features, and important safety warnings, including the California Proposition 65 notice.

Official Product Videos