1. Introduction
This manual provides detailed instructions for the safe and effective operation of your RovyVon Aurora A11 Titanium LED Flashlight. Please read this manual thoroughly before using the product and retain it for future reference.

Figure 1: RovyVon Aurora A11 Titanium LED Flashlight (Blue Sky edition). This image shows the flashlight from an angled perspective, highlighting its compact size and unique blue and white star pattern.
2. Product Features
- High-Quality Construction: Crafted from durable titanium, ensuring longevity and a premium feel.
- Powerful Illumination: Equipped with an LED light source, providing up to 650 lumens of super bright light.
- Multiple Lighting Modes: Features four brightness modes (Low, Medium, High, Strobe) to adapt to various lighting needs.
- Rechargeable Design: Integrated battery can be conveniently charged via any USB port, eliminating the need for disposable batteries.
- Compact and Portable: Designed as an Everyday Carry (EDC) flashlight, it is small enough to fit in a pocket, purse, or attach to a keychain.
- Water Resistant: Built to withstand splash water, sudden rain, or snow, suitable for outdoor use. Note: Not designed for submersion in water.
- Momentary On Function: Quick access to the high setting by holding the power button.
3. Package Contents
Please check the package for the following items:
- RovyVon Aurora A11 Titanium LED Flashlight
- Built-in Lithium Polymer Battery (pre-installed)
- Pocket Clip
- USB Charging Cable
- User Manual (this document)
4. Setup
4.1 Initial Charge
Before first use, it is recommended to fully charge your RovyVon Aurora A11 flashlight. The flashlight comes with a built-in Lithium Polymer battery.
- Locate the micro USB charging port on the side of the flashlight. This port is typically covered by a rubber flap for water resistance.
- Open the rubber flap.
- Connect the provided USB charging cable to the flashlight's port.
- Connect the other end of the USB cable to a standard USB power source (e.g., computer USB port, wall adapter, power bank).
- An indicator light will show the charging status. Refer to the flashlight's specific indicator behavior (e.g., red for charging, green for full).
- Once fully charged, disconnect the cable and securely close the rubber flap to maintain water resistance.

Figure 2: The RovyVon Aurora A11 flashlight displaying its micro USB charging port, located beneath a protective flap on the side of the device.
4.2 Attaching the Pocket Clip
The included pocket clip can be attached to the flashlight for secure carrying on a pocket, belt, or backpack strap.
- Align the clip with the designated groove on the flashlight body.
- Gently slide or snap the clip into place until it is securely fastened.

Figure 3: Side view of the RovyVon Aurora A11 flashlight, illustrating the position of the control button and the attached pocket clip.
5. Operating Instructions
The RovyVon Aurora A11 features a single side switch for all operations.
5.1 Basic Operation
- Turn On/Off: Double-click the side switch to turn the flashlight on. Double-click again to turn it off.
- Change Brightness Modes: While the flashlight is on, single-click the side switch to cycle through Low → Medium → High.
- Momentary High: Press and hold the side switch for instant access to the High mode. Release the switch to turn off.
- Strobe Mode: Triple-click the side switch to activate Strobe mode. Single-click to return to the previously used brightness mode, or double-click to turn off.
5.2 Mode Memory
The flashlight typically remembers the last used brightness mode (Low, Medium, or High) and will turn on in that mode when double-clicked again.
6. Maintenance
6.1 Cleaning
- Wipe the flashlight body with a soft, damp cloth to remove dirt or debris.
- Do not use harsh chemicals or abrasive cleaners, as these may damage the titanium finish or internal components.
6.2 Water Resistance
The RovyVon Aurora A11 is water resistant, meaning it can withstand splashes, rain, or snow. However, it is not designed for submersion in water. Ensure the USB charging port's rubber flap is securely closed at all times when not charging to maintain water resistance.
6.3 Battery Care
- Avoid fully depleting the battery frequently, as this can reduce its lifespan.
- If storing the flashlight for an extended period, charge it to approximately 50% every few months to prevent deep discharge.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | Battery is depleted. | Charge the flashlight using the provided USB cable. |
| Flashlight turns on but is dim. | Battery is low. | Charge the flashlight. |
| Flashlight does not charge. | Faulty USB cable or power source. | Try a different USB cable or power adapter. Ensure connections are secure. |
| Water ingress after exposure to water. | USB port flap not securely closed, or flashlight submerged. | Ensure the rubber flap is always closed. Avoid submersion. If water ingress occurs, discontinue use and allow to dry completely. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | A11 Blue Sky |
| Brand | RovyVon |
| Material | Titanium |
| Light Source | LED |
| Max Lumen Output | 650 Lumens |
| Brightness Modes | Low, Medium, High, Strobe |
| Power Source | Battery Powered (Rechargeable) |
| Battery Type | 1 Lithium Polymer battery (included) |
| Charging Port | USB |
| Water Resistance Level | Water Resistant (splash, rain, snow) |
| Dimensions (H x W) | 2.26 inches (H) x 0.61 inches (W) |
| Item Weight | 0.81 Ounces (approx. 22.96 g) |
| Parcel Dimensions | 10.01 x 7.11 x 4.39 cm |
9. Safety Information
- Do not shine the flashlight directly into eyes. The high lumen output can cause temporary vision impairment.
- Keep out of reach of children.
- Do not disassemble the flashlight. This may void the warranty and cause damage to the device.
- Avoid exposing the flashlight to extreme temperatures or direct sunlight for prolonged periods.
- Use only the recommended charging methods and cables.
- Dispose of the product and its battery responsibly according to local regulations.
10. Warranty and Support
RovyVon products are manufactured with high standards of quality and craftsmanship. For specific warranty details, please refer to the warranty card included with your product or visit the official RovyVon website. For technical support or customer service inquiries, please contact RovyVon customer support through their official channels.
RovyVon has been on the market since 2017 and has established a reputation among customers worldwide.
For more information, visit: RovyVon Official Store