Product Overview
This Fervor Deluxe Grill Cover is specifically designed to keep your Fervor gas grill clean and dry when not in use. It offers maximum protection against various outdoor elements throughout the year. The cover features a full-width ventilation grille, allowing the material to breathe and preventing condensation. Additionally, it is equipped with secure Velcro fasteners to ensure it remains in place and prevents it from being blown away by wind.
Setup and Installation
Follow these steps for proper installation of your Fervor Deluxe Grill Cover:
- Ensure your grill is completely cool and clean before attempting to cover it.
- Unfold the grill cover completely.
- Carefully place the cover over your grill, ensuring it fits snugly. This cover is designed for 3-burner grills, accommodating dimensions up to 134.6 cm (Height) x 66 cm (Width) x 147.3 cm (Length), suitable for grills up to 142.2 cm (56 inches) in overall length.
- Locate the Velcro fasteners positioned at the bottom edge of the cover. Securely fasten these straps around the grill legs or base to prevent the cover from being displaced by wind.
- Verify that the built-in ventilation grille is unobstructed to allow for adequate air circulation, which helps prevent moisture buildup and condensation.
Image: The Fervor Deluxe Grill Cover properly installed on a grill, demonstrating its fit and comprehensive coverage.
Usage Guidelines
To ensure the longevity and optimal performance of your grill cover:
- Always allow your grill to cool down completely before placing the cover over it. Covering a hot grill can damage the cover material.
- Regularly inspect and ensure that the Velcro fasteners are securely attached, especially during periods of high wind or adverse weather conditions.
- While the cover is designed to withstand various elements, it is advised not to use it in extremely strong winds without additional securing measures, as indicated in the warnings.
- The cover is constructed from a durable, weatherproof, waterproof, and UV-resistant fabric, making it suitable for continuous outdoor exposure.
Care and Maintenance
Proper care will significantly extend the lifespan and maintain the protective qualities of your Fervor Deluxe Grill Cover:
- Cleaning: To clean the cover, wipe it down with a damp cloth using a mild soap solution. Rinse thoroughly with clean water and allow it to air dry completely before folding or storing. Avoid harsh chemicals or abrasive cleaners.
- Storage: If the cover will not be used for an extended period, store it in a dry, cool environment, away from direct sunlight, to preserve its material integrity.
- Inspection: Periodically check the cover for any signs of wear, such as tears, fraying, or damage to the seams and fasteners. Address minor issues promptly to prevent further deterioration.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cover blows off in windy conditions | Velcro fasteners not securely attached or insufficient for extreme wind. | Ensure all Velcro fasteners are tightly secured around the grill base or legs. Avoid using the cover in extremely strong winds. For very high wind conditions, consider additional weights or ties if necessary. |
| Condensation or moisture buildup under cover | Obstructed ventilation or high humidity. | Ensure the built-in ventilation grille is clear and not blocked by debris or the grill itself. If condensation persists, temporarily remove the cover to allow the grill to air out and dry. |
| Cover appears ill-fitting (too small/large) | Incorrect cover size selected for your grill model. | Verify your grill's dimensions against the cover's specified dimensions (134.6 cm H x 66 cm W x 147.3 cm L). This cover is specifically designed for 3-burner grills up to 142.2 cm (56 inches) in length. |
Product Specifications
- Model: Fervor Deluxe Grill Cover (3-Burner)
- Dimensions (H x W x L): 134.6 cm x 66 cm x 147.3 cm (53 in x 26 in x 58 in)
- Compatibility: Designed to fit 3-burner grills up to 142.2 cm (56 inches) in length.
- Material: Heavy-duty, durable textile fabric.
- Color: Black.
- Key Features: Built-in full-width ventilation grille, secure Velcro fasteners, weatherproof, waterproof, and UV-resistant.
- Weight: Approximately 2.02 Kilograms (4.45 lbs).
Image: Main product view of the Fervor Deluxe Grill Cover, showcasing its overall design and robust construction.
Important Warnings
Please read these warnings carefully to ensure safe and proper use of the product:
- Do not use the grill cover in extremely strong or gusty wind conditions without ensuring it is exceptionally well-secured.
- Always secure the cover firmly using the integrated Velcro tabs to prevent it from being blown away, which could cause damage to the cover or surrounding property.
Warranty and Support
For detailed warranty information regarding your Fervor Deluxe Grill Cover, please refer to the documentation included with your purchase or visit the official Fervor website. For technical support, product inquiries, or assistance, please contact Fervor customer service directly. Contact details are typically available on the manufacturer's official website or through the retailer where the product was purchased.
You can also find more information on the official Fervor brand page.
