Introduction
Thank you for choosing the PELONIS 16-inch Pedestal Fan. This manual provides important information regarding the assembly, operation, maintenance, and troubleshooting of your new fan. Please read it thoroughly before use and retain it for future reference.
This fan is designed to provide efficient and energy-saving cooling with its powerful motor and high-quality blades. It features three speed settings, an 85-degree wide oscillation angle, a 7-hour shut-off timer, and adjustable height and tilt for customized comfort.
Image: The PELONIS 16-inch Pedestal Fan, showcasing its sleek black design and adjustable stand.
Important Safety Information
Please read and follow all safety instructions to reduce the risk of fire, electric shock, or injury.
- Always unplug the fan before cleaning or performing any maintenance.
- Do not insert fingers or foreign objects into the grille when the fan is operating.
- Ensure the fan is placed on a stable, level surface to prevent tipping.
- Do not operate the fan with a damaged cord or plug. Contact qualified service personnel for repair.
- Keep the fan away from water or excessive humidity.
- The built-in overheat protection automatically switches the fan off when the motor overheats. If this occurs, unplug the fan and allow it to cool before restarting.
Package Contents
Before assembly, ensure all components are present:
- Fan Head Assembly (Motor, Blades, Front and Rear Grilles)
- Adjustable Height Pole
- Round Base
- Remote Control (requires 2 AAA batteries, not included)
- Mounting Hardware (screws, nuts, wrench)
Setup and Assembly
Follow these steps to assemble your PELONIS Pedestal Fan:
- Step 1: Attach the Base. Place the round base on a flat surface. Insert the bottom end of the adjustable height pole into the center hole of the base. Secure it from underneath the base using the provided screw and wrench.
- Step 2: Adjust Pole Height. Loosen the height adjustment knob on the pole. Extend the inner pole to your desired height (between 3.5 to 4 feet) and tighten the knob to secure it.
- Step 3: Mount the Motor Unit. Attach the fan motor unit to the top of the adjustable height pole. Ensure it is securely fastened with the provided screw and wrench.
- Step 4: Install Rear Grille. Place the rear grille onto the motor unit, aligning the notches. Secure it with the retaining nut provided.
- Step 5: Attach Fan Blades. Slide the fan blades onto the motor shaft, ensuring they are properly seated. Secure the blades with the spinner cap, turning it counter-clockwise to tighten.
- Step 6: Install Front Grille. Attach the front grille to the rear grille, ensuring the clips snap into place around the circumference. Secure the grilles with the small screw at the bottom.
Image: A visual guide demonstrating the six steps for assembling the PELONIS Pedestal Fan, from attaching the base to securing the grilles.
Operating Instructions
Your PELONIS Pedestal Fan can be operated using the control panel on the fan unit or the included remote control.
Control Panel Functions:
Image: A close-up view of the fan's control panel, showing buttons for Speed, Timer, and On/Off, along with indicator lights for speed and timer settings.
- ON/OFF Button: Press to turn the fan on or off.
- SPEED Button: Press repeatedly to cycle through the three speed settings: Low, Medium, and High. Corresponding indicator lights will illuminate.
- TIMER Button: Press repeatedly to set the automatic shut-off timer for 1, 2, 4, or 7 hours. The selected timer duration will be indicated by illuminated lights.
Remote Control:
The remote control allows convenient operation from a distance. Insert 2 AAA batteries (not included) into the remote before use.
Image: The remote control for the PELONIS Pedestal Fan, featuring buttons for power, speed, and timer functions.
- The remote control mirrors the functions of the control panel: ON/OFF, SPEED, and TIMER.
- Point the remote directly at the fan's control panel for optimal response.
Oscillation and Tilt Adjustment:
The fan features an 85-degree wide oscillation angle and a 24-degree tilt adjustment to customize airflow direction.
Image: A diagram illustrating the 90-degree oscillation and 24-degree tilt adjustment capabilities of the PELONIS Pedestal Fan, showing how to customize airflow.
- Oscillation: Press the oscillation button on the fan's control panel (not available on remote) to activate or deactivate the oscillating movement.
- Tilt Adjustment: Manually adjust the fan head up or down to direct airflow as needed.
Adjustable Height:
The fan's height can be adjusted from 3.5 feet to 4 feet to suit various environments.
Image: A comparison showing the PELONIS Pedestal Fan at its minimum (3.5 ft) and maximum (4 ft) adjustable heights.
- To adjust height, loosen the height adjustment knob on the pole, slide the inner pole to the desired position, and then firmly tighten the knob.
Maintenance
Regular cleaning helps maintain the fan's performance and extends its lifespan.
- Cleaning the Fan: Always unplug the fan before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Cleaning Fan Blades and Grilles: Periodically, the front grille can be removed to clean the fan blades and the inside of the grilles. Refer to the assembly instructions for grille removal. Ensure all parts are completely dry before reassembling and operating the fan.
- Storage: When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging.
Troubleshooting
If you encounter issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | Not plugged in; power outlet not working; overheat protection activated. | Ensure fan is securely plugged into a working outlet. Unplug and allow to cool for 30 minutes if overheat protection is suspected. |
| Weak airflow. | Fan speed too low; grilles or blades are dirty. | Increase fan speed. Clean the fan blades and grilles as per maintenance instructions. |
| Fan is noisy. | Loose parts; fan not on a level surface; dirty blades. | Check for loose screws or components. Place fan on a stable, level surface. Clean fan blades. |
| Remote control not working. | Batteries are dead or incorrectly inserted; remote not pointed at sensor. | Replace batteries (2 AAA). Ensure correct polarity. Point remote directly at the fan's control panel. |
Specifications
- Brand: PELONIS
- Model: PFS40A4BBB
- Color: Black
- Electric Fan Design: Floor Fan
- Power Source: Corded Electric
- Product Dimensions: 15"D x 17.91"W x 48.43"H
- Room Type: Bedroom, Living room, Kitchen, Home Office
- Special Features: Timer, Adjustable height, Adjustable Tilt, Oscillating
- Recommended Uses: Ventilating, Cooling, Air Circulation
- Noise Level: 40 dB
Warranty and Support
PELONIS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official PELONIS website. If you require assistance, please contact PELONIS customer service.
Note: This manual is for informational purposes. Product specifications and features may be subject to change without notice.
