Introduction
The Yaheetech Adjustable Drawing Table is a versatile workstation designed for various activities such as drawing, drafting, writing, and general computer use. Its key features include a tiltable tabletop, a sliding pencil ledge, and a robust steel frame, making it suitable for artists, students, and professionals alike. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal use and longevity of your table.
Safety Information
Always follow the assembly instructions carefully to avoid injury. Ensure the table is properly assembled and adjusted before use. Be cautious when tilting the tabletop to prevent instability. Keep the table away from heat sources and do not place heavy objects on the tabletop that exceed the weight limit of 145 lb (66 kg).
Product Components
Before assembly, verify that all components listed below are present and undamaged. Refer to the included parts diagram for visual identification.
- PVC-coated MDF Tabletop
- Powder-coated Steel X-design Stand
- Sliding Pencil Ledge
- Adjustable Protective Feet (Levelers)
- Tabletop Tilt Mechanism
- Assembly Hardware (screws, bolts, etc.)
Figure 1: Overall view of the Yaheetech Adjustable Drawing Table.
Figure 2: Key dimensions of the drawing table.
Setup and Assembly
Assembly is required for this product. Please follow the detailed instructions provided in the separate assembly manual included with your purchase. The general steps are outlined below:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble the Base: Connect the steel frame components to form the stable X-design base using the provided hardware. Ensure all connections are secure.
- Attach Tabletop: Securely fasten the tabletop to the assembled base.
- Install Pencil Ledge: Slide the pencil ledge into its designated L-shaped slots on the tabletop frame.
- Adjust Protective Feet: Screw in the protective foot pads at the bottom of each leg. Adjust them to level the table on uneven surfaces and prevent floor scratches.
Figure 3: Detail of the robust X-design steel base.
Figure 4: Adjustable protective feet for leveling and stability.
Operating Instructions
Adjusting Tabletop Tilt
The tabletop can be tilted to 5 lockable angles, ranging from 0 to 30 degrees from the horizontal. To adjust, lift the tabletop slightly and engage the support arm into the desired notch. Ensure the tabletop is securely locked in place before use.
Figure 5: Detail of the tabletop tilt adjustment mechanism.
Figure 6: Tabletop in a tilted position.
Using the Sliding Pencil Ledge
The table features a sliding pencil ledge designed to prevent items from rolling off when the tabletop is tilted. For a flat working surface without the ledge, simply slide it out of its L-shaped slots.
Figure 7: Sliding pencil ledge detail.
Multipurpose Use
This table is designed for versatility. Use it flat as a standard desk for computer work or writing, or tilt the tabletop for comfortable drawing, painting, or reading. The adjustable height (30-41 inches) allows for ergonomic positioning.
Figure 8: Demonstrating multipurpose use for art and laptop work.
Figure 9: User engaged in art on the tilted drawing table.
Product Demonstration Video
Video 1: Official product video demonstrating the features and versatility of the Yaheetech Adjustable Drawing Table, including its tilt function and robust design.
Maintenance
To maintain the appearance and functionality of your Yaheetech Adjustable Drawing Table, wipe it clean with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish. Regularly check and tighten all screws and bolts to ensure stability.
Troubleshooting
Table Instability
If the table feels wobbly, ensure all assembly screws are securely tightened. Adjust the protective foot pads by screwing them in or out until the table is stable and level on your floor.
Tabletop Not Tilting Smoothly
Check the tilt mechanism for any obstructions or debris. Ensure the support arm is properly aligned with the notches. If issues persist, inspect the hinges for damage.
Missing or Damaged Parts
If you find any parts missing or damaged upon unboxing, please contact Yaheetech customer support immediately for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Product Dimensions (D x W x H) | 41.73"D x 23.62"W x (30-41)"H |
| Tabletop Thickness | 0.7 Inches |
| Color | White Tabletop, Black Stand |
| Materials | Powder-coated Steel, PVC-coated MDF |
| Tabletop Tilt Angle | 0-30 degrees (5 lockable positions) |
| Maximum Weight Capacity | 145 lb (66 kg) |
| Item Weight | 33.31 Pounds |
| Assembly Required | Yes |
Warranty and Support
Yaheetech products are designed for quality and durability. For information regarding product warranty, returns, or technical support, please refer to the warranty card included with your purchase or visit the official Yaheetech store online. You can find more information and contact details at the Yaheetech Brand Store.
