SANUS Premium Full Motion TV Mount Instruction Manual

1. Introduction

Thank you for choosing the SANUS Premium Full Motion TV Mount. This mount is designed to provide a sturdy and versatile solution for mounting your television, offering smooth extension, swivel, and tilt capabilities for an optimal viewing experience.

This manual provides detailed instructions for the safe and proper installation and operation of your TV mount. Please read all instructions carefully before beginning installation.

Key Features:

• Supports TVs from 42" to 90" and up to 125 lbs.
• Smoothly extends up to 22" from the wall.
• Offers wide swivel range for flexible viewing angles.
• Allows effortless tilt adjustment to eliminate glare.
• Retracts to a slim 2.5" profile from the wall.
• Includes comprehensive hardware, drilling template, and cable ties for easy installation.
• UL listed and rigorously safety tested.

Image: The SANUS Premium Full Motion TV Mount, showcasing its robust articulating arm design.

2. Setup and Installation

Before you begin, ensure you have all necessary tools and that your wall type is suitable for this mount (wood studs 16" wide or concrete). It is recommended to have two people for installation.

Installation Steps:

1. Assemble and Attach TV Brackets:

   Carefully place your TV face down on a soft, clean surface. Attach the vertical TV brackets to the back of your television using the provided hardware. Ensure the brackets are securely fastened and centered.

   

   Image: A visual representation of the 1-2-3 installation process, showing a drilling template and attaching brackets to the TV.

2. Attach Wall Plate to Wall:

   Use the included drilling template to mark the pilot holes on your wall. Drill the pilot holes according to the instructions for your specific wall type (wood stud or concrete). Securely attach the wall plate to the wall using the provided lag bolts and washers. Ensure the wall plate is level before tightening all fasteners.

   

   Image: A person using a drill with the provided drilling template to mark holes on the wall for mount installation.

3. Hang TV on Arm:

   With assistance, carefully lift the television and hook the TV brackets onto the wall plate's articulating arm. Ensure the TV is securely seated on the mount. Follow the instructions to engage any safety locks or screws to prevent accidental dislodging.

   

   Image: Two individuals carefully lifting and hanging a large television onto the installed SANUS full motion TV mount.

After installation, you can make minor adjustments to level and center your TV on the wall.

Image: Illustrates how to level and center the TV on the mount after initial installation, with green arrows indicating horizontal adjustment.

3. Operating the TV Mount

The SANUS Premium Full Motion TV Mount allows for flexible viewing angles and positions.

Extension:

Gently pull the television away from the wall to extend the mount. The mount can extend up to 22 inches, allowing you to bring the TV closer for an immersive viewing experience or to access cables behind it.

Image: A side view of the TV mount extending the television away from the wall, illustrating its 22-inch extension capability.

Swivel:

To adjust the horizontal viewing angle, gently push or pull the side of the television to swivel it left or right. The mount allows for a wide swivel range, up to 80 degrees left or right, depending on TV size and wall position.

Image: A person adjusting the swivel of a mounted television, demonstrating the mount's ability to rotate the screen left and right for optimal viewing.

Tilt:

Adjust the vertical viewing angle by gently tilting the top or bottom of the television. This feature helps to reduce glare from lights or windows and optimize viewing from different heights. The mount supports up to 15 degrees of tilt.

Image: A television tilted downwards on the mount, illustrating how the tilt feature can eliminate glare from overhead light sources.

Cable Management:

Utilize the integrated cable ties to neatly route and secure cables along the articulating arm. This helps maintain a clean appearance and prevents cables from getting pinched or tangled.

Image: A hand securing cables to the TV mount arm using an included cable tie, demonstrating the integrated cable management feature.

4. Maintenance

The SANUS TV mount requires minimal maintenance to ensure long-lasting performance.

• Cleaning: Wipe the mount with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Inspections: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or frequent adjustments may cause fasteners to loosen.
• Lubrication: The articulating joints are designed for smooth operation and typically do not require lubrication. If movement becomes stiff, contact customer support.

5. Troubleshooting

If you encounter issues with your SANUS TV mount, refer to the following common problems and solutions:

6. Specifications

7. Warranty and Support

SANUS products are designed and engineered in the U.S. and are backed by over 30 years of experience in the industry.

For customer support, technical assistance, or warranty inquiries, please contact SANUS customer care. They offer 7-day-a-week U.S.-based expert customer care.

For more information, visit the official Sanus Store on Amazon.