HOMCOM IT836-269BK0631

Download PDF
Contents

HOMCOM Mobile Printer Stand with Drawers

Model: IT836-269BK0631

1. Introduction

Thank you for choosing the HOMCOM Mobile Printer Stand with Drawers. This versatile storage unit is designed to enhance your office or home workspace, providing ample space for your printer, documents, and other essentials. Featuring a minimalist design, lockable drawers for security, and smooth-rolling wheels for easy mobility, this cabinet offers both functionality and style. Please read this manual carefully before assembly and use to ensure proper installation and safe operation.

2. Safety Information

Safety Warning: To prevent injury or damage, please adhere to the following guidelines:

  • Do not exceed the maximum load capacity of 55 kg for the entire unit.
  • Ensure the stability of the cabinet during use. Place it on a flat, level surface.
  • Exercise caution around moving parts, such as drawers and wheels, to avoid pinching.
  • Be aware of sharp edges during assembly and handling.
  • Keep small parts and assembly hardware out of reach of children.

3. Setup and Assembly

This unit requires assembly. Please follow the instructions carefully. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.

3.1 Package Contents

Verify that all components and hardware listed in the assembly diagram are present before beginning. Each piece is typically numbered or lettered for easy identification.

3.2 Assembly Steps

  1. Unpack and Identify: Carefully unpack all parts and lay them out. Refer to the assembly diagram to identify each component and hardware piece.
  2. Assemble Frame: Begin by connecting the main frame panels according to the diagram. Use the provided screws and fasteners. Do not overtighten screws, as this can damage the engineered wood material.
  3. Install Shelves and Dividers: Insert shelves and internal dividers into their designated slots or attach them with the appropriate hardware.
  4. Assemble Drawers: Construct the drawers, ensuring the drawer slides are correctly oriented. Install the lock mechanism on the designated drawer.
  5. Attach Cabinet Door: Mount the cabinet door using the provided hinges.
  6. Install Wheels: Attach the four wheels to the bottom of the unit. Ensure the two lockable wheels are positioned at the front for easy access to the brakes.
  7. Final Tightening: Once fully assembled, gently tighten all screws to ensure stability, being careful not to strip the wood.
Assembled HOMCOM Mobile Printer Stand

Image: The fully assembled HOMCOM Mobile Printer Stand, showcasing its design and storage compartments.

Dimensions of HOMCOM Mobile Printer Stand

Image: Diagram illustrating the overall dimensions of the printer stand: 100 cm (length) x 35 cm (depth) x 65 cm (height).

4. Operating Instructions

4.1 Storage and Organization

The unit features multiple storage options:

  • Top Surface: Ideal for placing a printer, scanner, or other office equipment.
  • Open Shelves: Use for easy access to frequently used items, books, or decorative elements.
  • Drawers: Store smaller office supplies, stationery, or personal items. The top drawer is lockable for secure storage of important documents.
  • Cabinet with Door: Provides concealed storage for binders, files, or other larger items. Note: This cabinet is designed for flat storage of documents, not for hanging file folders.
Storage features of the HOMCOM printer stand

Image: Detailed view of the storage compartments, including sliding drawers, open shelves, and a cabinet with a door.

Lockable drawer and file storage guidance

Image: Close-up of the lockable drawer with keys, demonstrating its security feature. Also shows the correct way to store documents flat, not hanging.

4.2 Mobility and Stability

The unit is equipped with four wheels for easy movement, two of which have brakes for stability.

  • Moving the Unit: To move the stand, ensure the brakes on the two front wheels are disengaged. Gently push or pull the unit to its desired location.
  • Securing the Unit: Once the stand is in position, engage the brakes on the two front wheels to prevent accidental movement and ensure stability.
Wheels with brakes on the HOMCOM printer stand

Image: Close-up of one of the wheels, highlighting the brake mechanism for securing the stand in place.

5. Maintenance

Regular maintenance will help prolong the life of your HOMCOM printer stand.

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
  • Fastener Check: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary, but be careful not to overtighten, especially with engineered wood.
  • Drawer Slides: If drawers become stiff, clean the slides and apply a small amount of silicone lubricant if needed.
  • Wheel Care: Keep wheels free of debris. If wheels become difficult to roll, clean them and ensure the axles are clear.

6. Troubleshooting

If you encounter issues with your printer stand, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Unit is wobbly or unstable.Screws are loose; uneven floor; weight not evenly distributed.Ensure all screws are tightened (do not overtighten). Move to a level surface. Redistribute items inside the unit. Engage wheel brakes.
Drawers do not slide smoothly.Drawer slides are misaligned or dirty; obstruction in the slide mechanism.Check drawer slide alignment. Clean slides and remove any debris. Apply a small amount of silicone lubricant if necessary.
Difficulty during assembly (e.g., holes not aligning).Incorrect part orientation; manufacturing variation.Double-check the assembly diagram for correct part orientation. If parts are genuinely misaligned, contact customer support. Do not force components.
Wood material appears damaged during assembly.Screws overtightened; excessive force applied.Engineered wood can be delicate. Avoid overtightening screws. Use hand tools rather than power tools for final tightening.

7. Specifications

BrandHOMCOM
ModelIT836-269BK0631
ColorBlack and White
MaterialEngineered Wood
Overall Dimensions (L x W x H)100 cm x 35 cm x 65 cm
Product Weight27 kg
Maximum Load Capacity (Total)55 kg
Maximum Load Capacity (Per Drawer)3 kg
Maximum Load Capacity (Per Compartment)8 kg
Special Features4 wheels (2 with brakes), Lockable drawers
Dimensions of HOMCOM Mobile Printer Stand

Image: Technical drawing showing the precise measurements of the printer stand, including length, depth, and height.

8. Warranty and Support

For any questions, concerns, or issues regarding your HOMCOM Mobile Printer Stand, please contact HOMCOM customer support. Refer to your purchase documentation for specific warranty details and contact information.

You can also visit the official HOMCOM store for more information and products: HOMCOM Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.