NEBO SLYDE+ Flashlight (2nd Gen) Instruction Manual

Introduction

The NEBO SLYDE+ Flashlight (2nd Gen) is a versatile 2-in-1 lighting tool, combining a powerful LED flashlight with a slide-out COB work light. Designed for durability and convenience, it features multiple light modes, a magnetic base for hands-free operation, and is water and impact resistant. This manual provides detailed instructions for its setup, operation, and maintenance.

Key Features

• 2-in-1 Design: Combines a high-lumen LED flashlight with 4X Zoom and a slide-out COB work light.
• 7 Dimmable Light Modes: Includes High (400 lumens) and Low (40 lumens) for flashlight, 5 Work Light modes (White High 400lm, Red Low 4lm), and Red Flash for emergency signaling.
• Powerful Magnetic Base: Allows for hands-free lighting by attaching to metal surfaces.
• Durable Construction: Water and impact-resistant, made from anodized aircraft-grade aluminum.
• Power Memory Recall: Remembers your last used light mode.
• Direct-to-Red Functionality: Preserves night vision.
• Battery Powered: Operates on 4 AAA alkaline batteries (included).

Setup

Battery Installation

The NEBO SLYDE+ comes with 4 AAA alkaline batteries pre-installed. To replace them:

1. Unscrew the tail cap of the flashlight.
2. Carefully remove the old batteries.
3. Insert four new AAA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the battery compartment.
4. Screw the tail cap back on securely.

Image: Inserting AAA batteries into the NEBO SLYDE+ Flashlight.

Operating Instructions

Power On/Off and Mode Selection

The SLYDE+ features a side-positioned power button for easy access to its various light modes.

• Flashlight Mode: Press the power button once to activate the front LED flashlight. Press again to cycle through High and Low modes.
• COB Work Light Mode: Slide the head of the flashlight upwards to reveal and activate the COB work light. This action automatically turns off the front flashlight.
• Work Light Modes: Once the COB work light is active, press the power button to cycle through its modes: White High, White Low, Red High, Red Low, and Red Flash (for emergency signaling).
• Power Off: Press and hold the power button for approximately 2 seconds to turn off the light from any mode. The device features Power Memory Recall, meaning it will turn back on in the last used mode.

Image: Overview of the 4 light modes available on the SLYDE+.

Image: The SLYDE+ in Red Hazard Flasher mode, visible up to 1 mile away.

Play video

Video: A closer look at the NEBO SLYDE+ Flashlight, demonstrating its features including the slide-out work light and magnetic base.

4X Adjustable Zoom

The front LED flashlight features a 4X adjustable zoom. To adjust the beam from a wide floodlight to a focused spotlight, simply twist the head of the flashlight.

Image: Demonstrating the 4X adjustable zoom for spotlight or floodlight.

Magnetic Base Usage

The powerful magnetic base located at the tail end of the flashlight allows for convenient hands-free lighting. Simply attach the base to any metal surface, such as a car hood, workbench, or metal cabinet, to direct light where you need it.

Image: The powerful magnetic base provides hands-free lighting.

Maintenance

Cleaning

To maintain optimal performance and appearance, wipe the flashlight with a soft, damp cloth as needed. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.

Battery Care

For prolonged storage, especially if not using the flashlight for an extended period, remove the AAA batteries to prevent potential leakage and damage to the device.

Troubleshooting

Specifications

Warranty and Support

The NEBO SLYDE+ Flashlight (2nd Gen) comes with a Limited Warranty. For specific details regarding warranty coverage, claims, or product support, please refer to the official NEBO website or contact their customer service directly. You can also visit the NEBO Store on Amazon for additional information and resources.