Product Overview
The Goodyear Belts 22752 V-Belt is engineered to meet or exceed original equipment (OE) specifications, ensuring long belt life and quiet operation for your vehicle's belt drive system. This V-belt features a proprietary rubber formulation and a robust design for optimal performance and durability.
Image: Goodyear 22752 V-Belt, packaged and ready for installation. The belt is black with yellow Goodyear branding and product information on the packaging.
Key Features
- OEM Specifications: Designed to meet or exceed original equipment manufacturer specifications.
- Durable Material: Constructed with long-life EPDM rubber compound for extended service.
- Quiet Operation: Features a proprietary rubber formulation engineered for reduced noise.
- Radial Cog Design: Incorporates a Radial Cog design to prevent cracking and ensure maximum pulley contact.
- High Strength Cords: Utilizes high strength tensile cords for minimal tension decay and low maintenance.
- Precision Ground Sides: Sides are precision ground for optimal contact with pulleys.
Image: Cross-section diagram illustrating the internal components of a Goodyear V-Belt, including clear markings for identification, synthetic tension members, adhesion rubber layer, EPDM rubber compound, precision ground sides, and molded radial cogs for enhanced flexibility.
Setup and Installation
Proper installation of the V-belt is crucial for optimal performance and longevity. Always refer to your vehicle's specific service manual for detailed instructions and safety precautions before beginning any work.
- Safety First: Ensure the vehicle's engine is off and cool. Disconnect the battery to prevent accidental starting.
- Identify Old Belt: Locate the existing V-belt and identify its routing path around the pulleys. It is recommended to draw a diagram or take a photo for reference.
- Relieve Tension: Use the appropriate tool to relieve tension on the belt tensioner. Carefully remove the old belt from all pulleys.
- Inspect Pulleys: Before installing the new belt, inspect all pulleys for wear, damage, or misalignment. Replace any worn components.
- Install New Belt: Route the new Goodyear 22752 V-Belt exactly as the old one was routed. Start by placing the belt around the fixed pulleys, then carefully guide it onto the tensioner pulley while applying tension.
- Verify Seating: Ensure the belt is fully seated in all pulley grooves. The precision ground sides of the Goodyear belt are designed for maximum contact.
- Check Tension: Once installed, release the tensioner and verify proper belt tension according to your vehicle's specifications.
- Reconnect Battery: Reconnect the battery and start the engine. Observe the belt for proper operation, ensuring no slipping or unusual noises.
Image: Detailed view of the ribbed side of the Goodyear V-Belt, showcasing the molded radial cogs designed for enhanced flexibility and grip within pulley grooves.
Operating Considerations
Once installed, the Goodyear 22752 V-Belt operates as part of your vehicle's accessory drive system. It is designed for quiet and efficient power transfer.
- Initial Run-in: After installation, operate the vehicle for a short period and then re-check belt tension if your vehicle manual recommends it.
- Normal Operation: The belt should operate smoothly without excessive noise (squealing, chirping) or slipping.
- Environmental Factors: The EPDM rubber compound is designed to withstand various environmental conditions, including temperature fluctuations and exposure to common automotive fluids.
Maintenance
Regular inspection and maintenance can extend the life of your Goodyear V-belt and ensure reliable vehicle operation.
- Visual Inspection: Periodically inspect the belt for signs of wear, such as cracks, fraying, glazing, or missing ribs. Check for any foreign objects lodged in the grooves.
- Tension Check: Refer to your vehicle's service manual for recommended belt tension check intervals. An improperly tensioned belt can lead to premature wear or component damage.
- Pulley Alignment: Ensure all pulleys are properly aligned. Misalignment can cause uneven belt wear and noise.
- Fluid Contamination: Avoid exposing the belt to oil, grease, or other automotive fluids, as these can degrade the rubber compound over time. Clean any spills immediately.
- Replacement: Replace the belt if any significant signs of wear or damage are observed, or according to your vehicle manufacturer's recommended service schedule.
Image: Close-up view of the smooth, back side of the Goodyear V-Belt, showing the durable EPDM rubber compound and overall belt integrity.
Troubleshooting
Common issues related to V-belts and potential solutions:
| Symptom | Possible Cause | Solution |
|---|---|---|
| Squealing/Chirping Noise | Loose belt tension, worn belt, misaligned pulleys, contaminated belt surface. | Check and adjust tension, inspect and replace belt if worn, check pulley alignment, clean belt and pulleys. |
| Belt Slipping | Insufficient tension, glazed belt, worn pulleys, fluid contamination. | Adjust tension, replace belt, inspect and replace worn pulleys, clean off contaminants. |
| Cracked/Frayed Belt | Age, excessive heat, improper tension, pulley issues. | Replace belt immediately. Inspect pulleys and tensioner for underlying issues. |
| Vibration | Damaged belt, misaligned pulleys, worn tensioner or idler pulley. | Inspect and replace belt, check and correct pulley alignment, replace worn pulleys/tensioner. |
If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified automotive technician.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Goodyear |
| Model Number | 22752 |
| Belt Style | V Belt |
| Length | 75.2 inches (1910 mm) |
| Width | 22/32 inches (approximately 0.6875 inches or 17.46 mm) |
| Material | EPDM Rubber Compound |
| Item Weight | 12.3 ounces (approximately 348.7 grams) |
| Manufacturer Part Number | 22752 |
| OEM Part Numbers | 673496-C91, D1102-5135, 468859-C1, 673946-C1, 90-3807T1, 5131769, 3R9089, 3R9090, 6N9144, 9B3214 |
Warranty Information
Goodyear Belts products are manufactured to high-quality standards. For specific warranty details regarding the Goodyear Belts 22752 V-Belt, please refer to the official Goodyear Belts warranty policy available on their official website or contact their customer support. Typically, warranties cover defects in material and workmanship under normal use and service.
Customer Support
For further assistance, technical inquiries, or support regarding your Goodyear Belts 22752 V-Belt, please contact Goodyear Belts customer service. You may find contact information on the product packaging or the official Goodyear Belts website.
Goodyear Belts Official Website: www.goodyearbeltsandhose.com (Note: This is a general example link, please refer to actual product documentation for precise contact details.)
