MODUS Dog Bark Collar User Manual

1. Introduction

Thank you for choosing the MODUS Dog Bark Collar. This device is designed to assist in training your dog to reduce excessive barking through humane and effective methods. It features two training modes: a No Shock mode (beep and vibration) and a Shock mode (beep, vibration, and static shock), along with 5 adjustable sensitivity levels to suit various dog sizes and barking behaviors. This manual provides detailed instructions for proper setup, operation, and maintenance to ensure safe and effective use.

Image 1.1: The MODUS Dog Bark Collar, featuring a blue and black adjustable strap and a central control unit with a digital display.

2. Safety Information

• Not for Aggressive Dogs: Do not use this product on aggressive dogs. If your dog is aggressive, consult a professional dog trainer before using any bark control device.
• Age and Weight Restrictions: This collar is suitable for dogs 6 months and older, weighing between 7 lbs and 150 lbs.
• Supervision: Always supervise your dog during the initial uses of the collar to ensure they respond appropriately and to monitor for any signs of discomfort or irritation.
• Collar Fit: Ensure the collar is fitted snugly but not too tight. It should allow one finger to fit comfortably between the strap and your dog's neck. Improper fit can lead to skin irritation or ineffective operation.
• Limited Wear Time: Do not leave the collar on your dog for more than 12 hours per day. Prolonged wear can cause skin irritation or pressure sores.
• Skin Inspection: Regularly inspect your dog's neck for any signs of redness, sores, or irritation, especially around the contact points. If irritation occurs, discontinue use and consult a veterinarian.
• Protection Mode: The collar includes a built-in protection mode that activates after 7 triggers within 1 minute, pausing operation for 2 minutes to prevent excessive correction.
• Water Resistance: The device is water-resistant, but not waterproof. Avoid submerging it in water.

3. Package Contents

Before beginning, please verify that all items are present in your package:

• 1 x Bark Control Unit
• 1 x Rechargeable Battery (Equipped In)
• 1 x Adjustable Nylon Strap
• 4 x E-shock Probes (2 short, 2 long)
• 4 x Conductive Silicone Covers
• 1 x Test Bulb
• 1 x USB Charging Cable
• 1 x Screwdriver
• 1 x Product Manual (this document)

Image 3.1: A visual representation of all components included in the MODUS Dog Bark Collar package, such as the control unit, strap, probes, silicone covers, charging cable, screwdriver, and test bulb.

4. Product Overview

Familiarize yourself with the main components of the bark control unit:

Image 4.1: Detailed diagram of the bark control unit, highlighting the Sensitivity Level Display, Power/Sensitivity Adjusting Button, Mode Setting Button, Contact Point, Charging Port (with cover), Microphone Sensor, Stainless Steel Probes, and Conductive Cover.

• Sensitivity Level Display: Shows the current sensitivity level (0-5).
• Power/Sensitivity Adjusting Button: Used to turn the device on/off and adjust sensitivity.
• Mode Setting Button: Used to switch between No Shock and Shock modes.
• Contact Points: Where the probes attach to deliver stimulation.
• Charging Port: USB port for recharging the device.
• Microphone Sensor: Detects dog barking.
• Stainless Steel Probes: Deliver static shock (if enabled).
• Conductive Silicone Covers: Placed over probes for comfort and to prevent skin irritation.

5. Setup

5.1 Charging the Device

1. Locate the charging port cover on the bark control unit.
2. Open the cover and connect the USB charging cable.
3. Plug the other end of the USB cable into a 5V/2A USB power adapter (not included), computer, power bank, or car charger.
4. The display screen will show a charging indicator. A full charge typically takes 2-3 hours and provides up to 15 days of use.
5. When fully charged, disconnect the cable and securely close the charging port cover to maintain water resistance.

Image 5.1: The collar's charging port and various compatible charging methods (PC, power bank, car charger, USB).

5.2 Attaching Probes and Silicone Covers

1. Select the appropriate length of stainless steel probes for your dog's coat type. Use shorter probes for short-haired dogs and longer probes for long-haired dogs to ensure proper contact.
2. Screw the chosen probes firmly into the contact points on the bark control unit.
3. Place the conductive silicone covers over the probes. These covers enhance comfort and help prevent skin irritation.

Image 5.2: Illustration of how to apply the silicone cap onto the probe for skin protection.

5.3 Fitting the Collar

1. Thread the adjustable nylon strap through the slots on the bark control unit.
2. Place the collar around your dog's neck, ensuring the bark control unit is positioned centrally under their chin.
3. Adjust the strap so that it is snug, but not tight. You should be able to fit one finger comfortably between the strap and your dog's neck. The probes must make consistent contact with your dog's skin.
4. The collar is adjustable from 5 to 26 inches and is suitable for dogs from 7 lbs to 150 lbs. Excess strap material can be cut off if necessary.

Image 5.3: The collar's adjustability shown on various dog breeds, indicating suitability for dogs from 7 lbs to 120 lbs and 6 months or older. The strap width is 0.98 inches.

5.4 Testing the Collar

To ensure the static shock function is working (if using Shock Mode):

1. Turn on the device and set it to Shock Mode (red lightning icon).
2. Place the test bulb (included) across the two metal probes.
3. Simulate a dog bark by blowing air directly at the microphone sensor on the device.
4. The test bulb should flash, indicating the static shock function is operational.

6. Operating Instructions

6.1 Power On/Off

• To Power On: Press and hold the Power/Sensitivity Adjusting Button (power icon) for 2 seconds. The display will light up.
• To Power Off: Press and hold the Power/Sensitivity Adjusting Button for 2 seconds. The display will turn off.

6.2 Selecting Training Mode

The collar offers two training modes:

• No Shock Mode (Beep + Vibration): Press the Mode Setting Button ('M' icon) until the green vibration icon is displayed. In this mode, the collar will only beep and vibrate when a bark is detected.
• Shock Mode (Beep + Vibration + Static Shock): Press the Mode Setting Button ('M' icon) until the red lightning icon is displayed. In this mode, the collar will beep, vibrate, and deliver a static shock when a bark is detected.

Image 6.1: A dog wearing the collar, illustrating the digital display for mode and sensitivity settings.

Image 6.2: Beep + Vibration Mode

Image 6.3: Beep + Vibration + Shock Mode

6.3 Adjusting Sensitivity Levels

The collar has 5 adjustable sensitivity levels (1-5), with Level 5 being the most sensitive and Level 1 the least. This allows you to customize the collar's responsiveness to your dog's barking.

• While the device is on, press the Power/Sensitivity Adjusting Button (power icon) to cycle through sensitivity levels 1-5.
• Select a level that effectively detects your dog's barks without triggering from other noises.

6.4 Bark Detection and Correction Sequence

The collar uses a smart triggering sensor that activates only when your dog barks, minimizing false triggers from other sounds.

• First Bark: The collar will emit a beep and then vibrate.
• Subsequent Barks (in Shock Mode): If barking continues, the collar will intellectually adjust the stimulation intensity (beep, vibrate, and static shock) to help control barking effectively.
• Protection Mode: If the collar detects 7 continuous barks within 1 minute, it will enter a 2-minute protection mode, during which it will not deliver any corrections, to prevent over-stimulation.

Image 6.4: Detailed diagrams showing the progressive correction steps for both No Shock Mode (Beep + Vibrate) and Shock Mode (Beep + Vibrate + Static Shock), including the 2-minute protection mode.

Image 6.5: The collar's intellectual identification feature, designed to prevent false triggers from other dogs' barking.

7. Maintenance

• Cleaning: Regularly clean the bark control unit and strap with a damp cloth. Ensure the contact points are free of dirt or debris. Do not use harsh chemicals.
• Charging: Recharge the battery when the visible display-screen flashes to indicate low battery.
• Probe Inspection: Periodically check the probes and silicone covers for wear and tear. Replace if damaged.
• Storage: When not in use, store the collar in a dry, cool place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

9. Specifications

10. Warranty and Support

10.1 Warranty Information

MODUS offers a 5-year replacement warranty and a 30-day money-back guarantee for this product. Please retain your proof of purchase for warranty claims.

10.2 Customer Support

If you have any questions, concerns, or require assistance with your MODUS Dog Bark Collar, please contact our customer support team. Refer to the contact information provided on the product packaging or the official MODUS website.