Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your STRONG SRT7406 TNTSAT HD DVB-S2 Satellite Receiver. Please read it thoroughly before using the device to ensure optimal performance and safety.
Image: Front view of the STRONG SRT7406 TNTSAT HD DVB-S2 Satellite Receiver. The device is black with the 'Strong' logo and 'TNT SAT' branding on the front panel, along with control buttons and an On/Off indicator light.
Package Contents
Before proceeding with the installation, please verify that all items are present in the package:
- STRONG SRT7406 TNTSAT HD DVB-S2 Satellite Receiver
- Remote Control
- 2x AAA Batteries
- Power Adapter (230V)
- TNTSAT Access Card (valid for 4 years)
Note: A 12V car adapter is not included but the device is compatible for use in caravans or boats.
Setup
Follow these steps to set up your STRONG SRT7406 receiver:
- Connect the Satellite Antenna: Connect your satellite dish cable to the "SAT IN" port (1) on the rear panel of the receiver.
- Connect to TV:
- For High Definition (HD) connection, use an HDMI cable to connect the receiver's HDMI OUT port (3) to an HDMI input on your television.
- Alternatively, for standard definition connection, use a SCART cable to connect the receiver's SCART TV port (4) to the SCART input on your television.
- Audio Connection (Optional): For digital audio output, connect an S/PDIF coaxial cable from the receiver's S/PDIF port (2) to your audio system (e.g., soundbar, AV amplifier).
- Insert TNTSAT Card: Carefully insert the TNTSAT access card into the card slot (5) on the rear panel. Ensure the chip faces downwards, as indicated by the "Puce vers le bas" label.
- Connect Power: Connect the provided power adapter to the receiver's power input (6) and then plug it into a wall outlet.
- Initial Setup: Turn on your television and select the correct input source (HDMI or SCART). The receiver will guide you through the first-time installation process, including automatic channel scanning for TNTSAT channels via ASTRA 19.2° East satellite.
Image: Rear panel of the STRONG SRT7406 receiver, showing labeled connection ports. From left to right: SAT IN (1), S/PDIF (2), HDMI (3), SCART TV (4), Smart Card Slot (5), and Power Input (6).
Operating Instructions
Basic Operation
- Power On/Off: Press the power button on the remote control or the front panel to turn the receiver on or off.
- Channel Selection: Use the P+/P- buttons on the remote or front panel to change channels. You can also enter channel numbers directly.
- Volume Control: Use the VOL+/VOL- buttons on the remote or front panel to adjust the volume.
- Menu Navigation: Use the remote control's arrow keys and OK button to navigate through the on-screen menus.
Advanced Features
- Electronic Program Guide (EPG): Access the EPG to view program schedules for up to 7 days.
- Parental Control: Set parental locks for menu functions and content to restrict access to certain programs.
- USB Functions: Connect a USB storage device to the USB 2.0 port for recording programs, playing back media files, or performing software updates. The receiver supports memorization of up to 4000 channels.
- Favorite Lists: Create personalized lists of your preferred TV and radio channels for quick access.
- Multilingual Support: The receiver supports DVB Teletext, audio tracks, and subtitles in multiple languages.
Maintenance
- Cleaning: Disconnect the receiver from the power supply before cleaning. Use a soft, dry cloth to clean the exterior. Do not use liquid or aerosol cleaners.
- Software Updates: The receiver supports software updates via satellite or USB. Regularly check for updates to ensure optimal performance and access to the latest features. Refer to the on-screen menu for update options.
- Smart Card: The TNTSAT access card has a validity period of 4 years. Ensure it is properly inserted and kept clean.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No picture or sound |
|
|
| Remote control not working |
|
|
| Slow startup time | Normal operation for initial boot-up. | Allow approximately one minute for the receiver to fully boot and display an image. |
Specifications
- Model: SRT7406
- Brand: Strong
- Color: Black
- Receiver Type: MPEG-4 HD DVB-S2 Satellite Receiver
- Satellite Compatibility: ASTRA 19.2° East (for TNTSAT)
- Video Resolution: 1080i, 720p, 576p
- Audio Output Mode: Digital
- Supported Audio Format: AAC
- Connectivity:
- 1x SAT IN
- 1x HDMI Out
- 1x SCART TV (CVBS)
- 1x S/PDIF Coaxial
- 2x USB 2.0 Ports
- Power Input (12V compatible, 230V adapter included)
- Channel Memory: Up to 4000 channels
- Compatible Devices: Television, Computer, Tablet (for media playback via USB)
- Power Supply: 12 Volts (via included 230V adapter)
- Included Accessories: Remote control, 2x AAA batteries, Power adapter, TNTSAT access card (4 years validity)
Warranty and Support
The STRONG SRT7406 receiver comes with a TNTSAT access card valid for 4 years. For technical support or warranty inquiries, please contact your retailer or the manufacturer, Strong. Information regarding software updates and spare parts availability can be found on the manufacturer's official website.
Spare parts availability: 4 Years.
Safety Information
- Do not expose the device to rain or moisture.
- Do not open the casing; refer all servicing to qualified personnel.
- Ensure proper ventilation around the receiver to prevent overheating.
- Use only the provided power adapter.
