Introduction
The Zippo HeatBank 9s Rechargeable Hand Warmer provides warmth and portable power for your electronic devices. Designed for comfort and convenience, this device features dual-sided heating and multiple heat settings, making it ideal for various cold weather activities. It also includes a power bank function to keep your USB-compatible devices charged on the go.
Image: The Zippo HeatBank 9s Rechargeable Hand Warmer, showcasing its sleek silver design.
What's in the Box
Your Zippo HeatBank 9s package includes the following items:
- Zippo HeatBank 9s Rechargeable Hand Warmer
- USB Charging Cable
- Instruction Sheet
Image: The Zippo HeatBank 9s retail packaging, indicating the contents.
Product Features
The Zippo HeatBank 9s is engineered with several key features for optimal performance and user convenience:
- Dual-Sided Heat: Provides warmth on both sides of the device for maximum comfort.
- Adjustable Heat Settings: Offers six (6) heat settings, reaching up to 120°F / 50°C, allowing you to customize your warmth level.
- Long-Lasting Battery: Equipped with a 5200 mAh lithium-ion battery for up to 9 hours of continuous heat.
- Power Bank Functionality: Charges USB-compatible devices such as mobile phones, MP3 players, tablets, and cameras.
- Battery and Heat Indicators: LED lights clearly display the current battery level and selected heat setting.
- Ergonomic Design: Shaped to fit comfortably in your hand.
Image: Visual representation of the HeatBank 9s features, including dual-sided heat and extended runtime.
Setup
Before first use, it is recommended to fully charge your Zippo HeatBank 9s.
- Locate the Micro-USB input port on the device (typically marked with a small battery icon or 'IN').
- Connect the smaller end of the provided USB charging cable to the Micro-USB input port on the HeatBank 9s.
- Connect the larger USB-A end of the cable to a powered USB port (e.g., computer, wall adapter, car charger).
- The indicator lights will illuminate to show charging progress. A full charge is indicated when all lights are solid.
Image: The HeatBank 9s connected to a laptop, illustrating the charging process.
Operating Instructions
Power On/Off
- To turn the hand warmer ON, press and hold the power button (often marked with a flame icon) for a few seconds until the heat indicator lights illuminate.
- To turn the hand warmer OFF, press and hold the power button again until the heat indicator lights turn off.
Heat Settings
The HeatBank 9s offers six heat settings. Once the device is powered on, short press the power button to cycle through the available heat levels. The indicator lights will change to reflect the selected setting.
Image: Diagram illustrating how to power on, check power level, and adjust temperature settings.
Charging External Devices (Power Bank Function)
To use your HeatBank 9s as a power bank:
- Locate the USB-A output port on the device (typically marked with 'OUT' or a lightning bolt icon).
- Connect your device's charging cable to the USB-A output port on the HeatBank 9s.
- Connect the other end of your device's charging cable to your electronic device.
- The HeatBank 9s will automatically begin charging your device. Note that the heating function is disabled when the power bank function is active.
Image: The HeatBank 9s charging a smartphone, demonstrating its power bank capability.
Maintenance
To ensure the longevity and optimal performance of your Zippo HeatBank 9s:
- Regular Charging: To prevent the lithium-ion battery from completely discharging and potentially affecting its ability to recharge, it is recommended to use and recharge the device periodically, even during off-season.
- Storage: Store the device in a cool, dry place. Avoid extreme temperatures, especially freezing conditions, as this can damage the battery.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Port Care: Keep the charging ports clean and free of debris to prevent rust or connection issues.
Troubleshooting
If you encounter issues with your Zippo HeatBank 9s, refer to the following common solutions:
- Device Not Heating: Ensure the device is fully charged. Press and hold the power button for a few seconds to activate the heating function. If the battery is low, the heating function may not activate or may operate at a lower setting.
- Device Not Charging: Check that the USB cable is securely connected to both the HeatBank 9s and the power source. Try using a different USB cable or power source. Ensure the charging ports are clean and free of obstructions.
- External Device Not Charging: Confirm the HeatBank 9s has sufficient charge. Ensure the charging cable for your external device is properly connected to the HeatBank's output port and your device. Remember, the heating function is temporarily disabled when charging an external device.
- Short Battery Life: Battery life can vary based on the selected heat setting and ambient temperature. Higher heat settings consume more power. Ensure the device is fully charged before use.
Specifications
| Model Name | Zippo Silver HeatBank 9s Rechargeable Hand Warmer |
| Model Number | Z4A18 (Part Number: 40584) |
| Brand | Zippo |
| Color | Silver |
| Material | Aluminum |
| Battery Type | Lithium-Ion |
| Battery Capacity | 5200 mAh |
| Max Operating Temperature | 120°F / 50°C |
| Run Time | Up to 9 hours |
| Charging Time | Approximately 9 hours (for full device charge) |
| Item Dimensions (LxWxH) | 2.38 x 0.95 x 4.88 inches |
| Item Weight | Approximately 0.24 Kilograms |
Warranty and Support
The Zippo HeatBank 9s Rechargeable Hand Warmer comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. For warranty claims, technical support, or further assistance, please contact Zippo customer service through their official website or the retailer where the product was purchased.
Please retain your proof of purchase for warranty validation.
